|
Spare-Air 3000 3.0 Kit, Yellow
By: Spare Air
Our price:
List price:
$299.00
You save
(
%)
- 3.0 cubic feet of air
- Refillable to 3000 psi off any SCUBA tank or air compressor with includedrefill adapter
- Easily attaches to your BC with included holster and safety leash
- Small, hands-free, nearly neutrally buoyant
- Built-in pressure indicator.
|
Product Description
Tested and approved, Spare Air is a totally self-contained (3.0 cu. ft. of air), refillable backup air system that's small and easy to use. It was designed to get you to the surface in the event of an emergency; yet, it is small enough to not even know you are wearing it! - Easy to travel with!! - Easy to wear! - Easy to refill! - Easy to hand off to a fellow diver in trouble! Click here to see a Video Review by ScubaLab of the Spare Air 3000
|
|
|
Trident Foam Scuba Tank Rack
By: Trident
Our price:
- THIS PRODUCT COMES COMPLETE WITH FULL MANUFACTURERS WARRANTY
|
Product Description
Keeps tanks from rolling Fits great in cars, trucks, and boats Lightweight foam material AVAILABLE SIZES: 2 tank (19 X 6 X 2 ) and 3 tank (29 X 6 X 2 ) FULL MANUFACTURER'S WARRANTY *SCUBA diving equipment
|
|
|
Wheeled Scuba Tank Boot - Scuba Tank N Tow - Colors Vary
By: Wheeled SCUBA Tank Boot
Our price:
- Easy Loading Handle
- Rolls Anywhere
- Colors: Red, Yellow, Blue, and Black
|
Product Description
Wheeled SCUBA Tank Boot - Scuba Tank n Tow
Made from polycarbonate and reinforced polypropylene with a stainless steel axle and hardware, this scuba tank boot allows you to roll your tank easily over sand, mud, parking lots, and pool sides.
Features include:
Accommodates any 7.25-inch aluminum tank and similar compressed air tanks
Polycarbonate/reinforced polypropylene construction with stainless steel axle and hardware
Self-draining tank boot stays on during dives (up to 200 feet)
Comfortable handle on the bottom for easy loading and unloading
Water resistant compartment for storing spare parts, tools, car keys, or soft-sided weights
Impact-resistant and UV-protected design
|
|
|
Trident Deluxe Save A Dive 40 Piece O-Ring Kit for Scuba Diving Tank Valves, Hoses, Regulators, Cameras etc Dive Diver
By: Trident
Our price:
List price:
$19.99
You save
(
%)
- Trident Deluxe Save A Dive 40 Piece O-Ring Kit
- Contains 40 various pieces in a plastic case
- Also contains 1/4 oz. container of silicone lube
- Great for your tank valve, hp and lp air hoses Works well for cameras, pressure gauges, dive lights,
- AUTHORIZED DEALER, FULL MANUFACTURER´S WARRANTY!!!
|
Product Description
This is a fantastic kit from Trident to repair any variety of dive items!
Features include: Trident Brand,
Deluxe Save A Dive Kit,
Contains 40 various pieces in a plastic case, Also contains 1/4 oz. container of silicone lube, Great for your tank valve, hp and lp air hoses
Works well for cameras, pressure gauges, dive lights, regulators and more. A necessity for your next dive adventure. Model #D602 - AUTHORIZED DEALER, FULL MANUFACTURER´S WARRANTY!!! Don't be left out on your next dive, this is a great kit from Trident!!!
|
|
|
XS Scuba Worthington Cylinders HP Steel 3442 psi. Tanks - X8-130, 16.0L
By: XS Scuba
Our price:
List price:
$520.90
You save
(
%)
- X7 - 7.25" diameter
- X8 - 8.00" diameter
- High-strength steel technology
- More volume in a compact cylinder
- Standard "Yoke Style" Thermo PRO valve
|
Product Description
The steel cylinders are manufactured at Worthington Cylinder's state of the art facility in Tilbury, Canada. The cylinders are manufactured using the Deep Draw and Ironing (DDI) process. Cylinders start from a circular plate of chrome-moly steel. Multiple draws on a hydraulic press transform the plate into an open ended shell. The shell is then closed, the neck is formed and the threads are machined. The DDI process produces the most consistence wall thickness resulting in the lightest weight, most efficient cylinders. This manufacturing process is what allows us to supply cylinders with the best buoyancy characteristics for scuba diving. During the process of Hot Dip Galvanizing, the exterior of our steel cylinders are submerged into 840°F molten zinc. The process deposits an 8 - 10 mil thick zinc barrier to protect against the corrosive ocean environment. This layer of zinc metallurgically bonds to the steel cylinder. It will not chip and wear away like a painted zinc finish. XS Scuba is so confident that exterior rust will not be an issue, we guarantee it for the life of the cylinder. If the exterior of your XS Scuba HDG steel cylinder rusts, we'll correct it for as long as you own the cylinder, without cost to you. Steel Cylinder Features: Manufacturing Process Built from Chromium Molybdenum steel plates Utilizes the deep drawn process; the preferred method to build a SCUBA steel cylinder This proc
|
|
|
Worthington 80cf Aluminum Tank
By: Catalina
Our price:
- THREAD: 3/4 - 14 NPSM
- K-Valve
- Current VIP Sticker
- Current Hydro.
|
Product Description
A Great standard 80 Aluminum Tank that looks good at an affordable price!
|
|
|
Sherwood HP 120 cu ft Steel Scuba Diving Tank Air Cylinder with Valve and Boot 3500 PSI Scuba Dive Diving Diver Authorized Dealer Full Warranty
By: Sherwood
Our price:
- Sherwood HP 120 cu ft Steel Scuba Diving Tank Air Cylinder with Valve and Boot
- AUTHORIZED DEALER, FULL MANUFACTURER´S WARRANTY!!!
- HP80 and HP100 Tanks also available: See our other Amazon Ads
- Zinc spray coating - powder paint.
- ST120 (3500 psi) Steel
|
Product Description
Features of this wonderful tank include: Sherwood Quality - Manufacturing Process: Built from Chromium Molybdenum steel plates. Utilizes the spun process. This process yields a cylinder with a very uniform wall thickness resulting in a lighter, more efficient cylinder. Buoyancy: Superior buoyancy characteristics. These cylinders have been designed to be slightly negative at the end of a dive. Exterior Finish: Shot Blast - Zinc spray coating - powder paint. Interior Finish: Shot Blast - Highly-resistant to internal rusting. Valves:Model High Pressure Din Valve #300S-S-35. Scuba steel cylinders include a high pressure design valve. Standard inlet thread (3/4"-14 NPSM). Boots: A high quality boot is included. TANK SPECIFICS for the HP120: TRUE CAPACITY: 123cu ft, DIAMETER: 7.29 inches, LENGTH: 28.9 inches, WEIGHT EMPTY: 41.5lbs, BUOYANCY FULL: -11.8lbs, BUOYANCY WITH 500 PSI: -4.4lbs, Chromium Molybdenum steel construction, Inlet thread is standard 3/4"-14 UNF-2B, Negatively buoyant throughout the dive, Manufactured to DOT-E12079-3500, Meets Canadian TC3AAM specifications. AUTHORIZED DEALER, FULL MANUFACTURER´S WARRANTY!!! This Super High Pressure Steel Scuba Cylinder Tank is GREAT for all your diving needs.
|
|
|
Steel Cylinder Tank Carry
By:
Our price:
|
Product Description
Steel Cylinder Carry Handle Carry steel tanks with ease and comfort Tough, injection-molded handle Fits XS Scuba Worthington & Faber steel cylinders Folds down when not in use
|
|
|
Catalina 6 cu ft. Aluminum Cylinder
By:
Our price:
|
Product Description
3000 PSI Nitrox ready up to 40% This cylinder is great for dry suit inflation bottles. Use with air, nitrox or argon!
|
|
|
6 cu ft 3000 PSI Aluminium High Pressure Spare Emergency Tank Cylinder with Valve for Scuba Diving Pony Bottle
By: Cramer Decker
Our price:
- AUTHORIZED DEALER, FULL MANUFACTURER´S WARRANTY!!! A must have for your dive
- Comes with a yoke design valve, 6 cu ft., about 0.9 liters, Pressure: 3000 PSI,
- Length: 10.80", Diameter: 3.21", Weight with valve: 3.14lbs, Buoyancy full: -1.5lbs
- Buoyancy 500 PSI: -1.1lbs, Sherwood Valve model #5000K-48,
- High visibility yellow makes it easy to locate
|
Product Description
AUTHORIZED DEALER, FULL MANUFACTURER´S WARRANTY!!! Use this great high pressure spare tank when in any type of emergency situation. Make sure your next dive is a safe one with this great emergency tank.
|
|
|
80cf Worthington Aluminum Scuba Cylinder
By: XS Scuba
Our price:
|
Product Description
High quality Worthington 80cf aluminum scuba cylinder, includes Thermo Deluxe K-Valve. 3000 psi working pressure, 7.25" dia. Available in 7 popular colors plus Shot Blast & Brushed Aluminum finish. Factory cleaned for enriched air service. Optional XS Scuba Pro Convertible valve, Thermo Pro International valve, Thermo 300 Bar DIN valve, XS Scuba Modular Pro valves, Thermo Modular Pro valves, XS Scuba Modular 300 Bar DIN valves & Thermo Modular 300 Bar DIN valves available.
|
|
|
Catalina Cylinders C80 K 80 Cubic feet Scuba Aluminum Cylinder with VX5000 Scuba Valve 3300psi
By: Catalina Cylinders
Our price:
- MATERIAL: Every cylinder is produced from high strength aluminum alloy 6061-T6.
- THREAD: Standard 3/4 - 14 NPSM
- REGULATION & INSPECTION: All seamless aluminum alloy compressed gas cylinders are manufactured in accordance with U.S. Departmenet of Transportation (DOT) 3AL and Transport Canada (TC) 3ALM requirements.
- Every cylinder is inspected and tested by a DOT and TC authorized independent inspection agency.
|
Product Description
3300 PSI - 6061-T6 alloy - which never requires an eddy-current inspection with devices such as Visual Plus, Visual Eddy or equivalent machines with an an impeccable record for safety and dependability. Includes VX5000 -"K " Shot Finish Scuba Valve: 3000psi - Specifications: 7.25 Inches in Diameter - 25.1 Inches in Length - Weight Empty = 34.4lbs - Buoyancy Full = -5.9lbs - Buoyancy Empty = -0.2lbs
|
|
|
120cf HP Steel Scuba Cylinder
By: XS Scuba
Our price:
|
Product Description
High quality Worthington 120cf (15.3l) HP steel scuba cylinder, includes XS Scuba Pro Convertible valve with Safety Handwheel and octagonal boot. 3442 psi working pressure, 7.25 in. dia. with hot dip galvanized finish. Thermo Pro International valve, XS Scuba Modular Pro valves, Thermo Modular Pro valves, XS Scuba Modular 300 Bar DIN valves & Thermo Modular 300 Bar DIN valves also available.
|
|
|
Scuba Tank Carry Handle
By: diveX
Our price:
- Attaches to tank valve neck.
- Easy way to carry a scuba tank with comfort.
|
Product Description
40MM diamater for use with steel tank (fits neck of air tanks with outer diamater between 39mm and 41mm) circumference 122.5mm to 128.8mm 43MM diamater for use with aluminum tank (fits neck of air tanks with outer diamater between 42mm and 44mm) circumference 132mm to 138.2mm
|
|
|
IST Scuba Tank Boot
By: IST
Our price:
List price:
$10.00
You save
(
%)
- Brand NEW with full Manufactures Warranty!
- -1
|
Product Description
IST Plastic Tank Boot Fits tanks up to 7.25 inches Drainage channels and holes
|
|
Major League Baseball Fan Shops
National Football League Fan Shops
National Basketball Association Fan Shops
National Hockey League Fan Shops
NCAA Fan Shops
NASCAR Fan Shops
|
