|
Bosch TS1002 Table Saw Rear Outfeed Support Extension
By: Bosch
Our price:
$29.91
List price:
$44.98
You save
$15.07
(
34%)
- Table saw rear outfeed support extension
- Extends 18-inches and stores flush to table; extends working depth of Bosch 4000 10-inch table saw
- Hardened metal construction; aluminum mounts
- Includes 1 table saw extension; table saw not included
- 1-year warranty
|
Product Description
Table saw rear outfeed support extension. Extends 18-inches and stores flush to table; extends working depth of Bosch 4000 10-inch table saw. Hardened metal construction; aluminum mounts. Includes 1 table saw extension; table saw not included. 1-year warranty
Product Description
Bosch TS1002 extends 18-inches and stores flush to table. It extends the working depth of Bosch 4000 10-inch table saw. It features hardened metal construction; aluminum mounts and includes 1 table saw extension. The table saw is not included. This product also has a 1-year warranty.
|
|
|
Bosch TS1003 Table Saw Left Side Support Extension
By: Bosch
Our price:
$21.53
List price:
$32.62
You save
$11.09
(
34%)
- Table saw left-side support extension for Bosch 4000 10-inch worksite table saw
- Extends table additional 12-inches for working with wide and long-pieces; stores flush when not in use
- Aluminum construction; 5mm hex wrench and needle nose pliers needed for installation
- Includes 1 table extension; table saw not included
- 4.4-pounds; 1-year warranty
|
Product Description
Bosch TS1003 Left Side Support for 10" Table Saw Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work. Bosch TS1003 Left Side Support for 10" Table Saw Features: Left Side Support. Model TS1003. Extends 12? and increases working width of table to 52?. Table Saw Attachments Part No. TS1003 Used on Model No. 4000 Sales Pack Quantity 1
|
|
|
General Tools S838 6 Piece 3/16-Inch to 1/2-Inch Drill Stop Assortment
By: General Tools
Our price:
$5.72
List price:
$14.09
You save
$8.37
(
59%)
- For use on twist or brad point drills to prevent excessive drill penetration
- Positive depth control assures exact hole depths for multiple drilling jobs
- Black oxide finish on cold rolled steel
- Sizes included: 3/16-, 1/4-, 5/16-, 3/8-, 7/16-, 1/2-inch diameters
- Includes hex wrench
|
Product Description
Use the General Tools S838 6 Piece 3/16? to ?? drill stop assortment on twist or brad point drills to prevent excessive drill penetration. They feature a black oxide finish on cold rolled steel. This set also includes hex wrench. Sizes included are 3/16, 1/4, 5/16, 3/8, 7/16, and 1/2 inch diameters.
|
|
|
DEWALT DW7351 Folding Table for DW735 Planer
By: DEWALT
Our price:
$49.99
List price:
$75.04
You save
$25.05
(
33%)
- Productivity
- Performance
- Backed by a 3-year warranty
- Lightweight and tough aluminum construction
- Easy on/off
|
Product Description
Designed to work with the DW735 planer, the DeWalt DW7351 folding tables are detachable and can be folded for convenience. With lightweight and tough aluminum construction, these 13-inch long tables add length to the planer surface. These tables measure 13 inches long and come with an easy-to-install hardware kit.
Product Description
Designed to work with the DW735 planer, the DeWalt DW7351 folding tables are detachable and can be folded for convenience. With lightweight and tough aluminum construction, these 13-inch long tables add length to the planer surface. These tables measure 13 inches long and come with an easy-to-install hardware kit.
|
|
|
Delta 78-989 Biesemeyer T-Square Dual Pointer Cut-Off Saw Stop
By: Biesemeyer
Our price:
List price:
$130.98
You save
(
%)
- Precise to 1/64-inch
- Constructed of rugged steel components
- Hand-calibrated at the factory for added precision
- Provides accurate measurements down to 1/64th of an inch
- Installs easy; measuring tape not included
|
Product Description
Biesemeyer 78-989 T-square Dual Pointer Cut-Off Saw Stop eliminates the need for cumbersome C-clamps. This Biesemeyer cut-off stop is designed to glide effortlessly along a 1-1/2-x-1-5/8-inch fence. Just a twist of the wrist and the stops are securely in place. Constructed of rugged steel components, this stop is hand-calibrated at the factory for added precision, and its hairline pointer provides accurate measurements down to 1/64th of an inch. This stop can be used with Biesemeyer radial table systems or miter table systems for 90-degree straight cuts.
|
|
|
Biesemeyer 78-939 Table Saw Cut-Off Stop for T-Square Fences
By: Biesemeyer
Our price:
$87.99
List price:
$110.94
You save
$22.95
(
21%)
- Adjustable to fit the BIESEMEYER home shop or commercial fences
- Quick release clamp for fast and safe setups
- Acts as a stand off to keep material away from the fence when using miter gauge
- Smooth sliding surface. The one inch dimension can be easily added when indexing the hairline on your T-square fence with the scale on the system-feets guide
- Adjustable to fit the Biesemeyer home shop and commercial fences
|
Product Description
Designed as a repetitive cutoff stop for increased productivity, the Biesemeyer 78-939 Table Saw Cutoff Stop for T-square Fences is adjustable to fit the Biesemeyer Home Shop and Commercial Fences. With a quick release clamp for fast and safe setups, this cutoff stop acts as a stand off to keep material away from the fence when using a miter gauge. This fence adds a 1-inch thickness to the fence, which can be easily compensated by adding an-inch to the fence index. This cutoff stop also includes a smooth sliding surface.
|
|
|
Hitachi 998866 Extension Assembly
By: Hitachi
Our price: $21.82
- Extension assembly
- For Hitachi C8FB2 8-1/2-inch slide compound saw
|
Product Description
EXTENSION WING ASSY C8FB2/10FS
|
|
|
Bench Dog 10-010 Crown-Cut Crown Molding Cutting Jig
By: Bench Dog
Our price:
List price:
$49.99
You save
(
%)
- Crown-cut crown molding cutting jig; fits all 10-inch and larger miter saws
- Fits all crown molding up to 6-inches wide; on-tool cutting guide for quick reference
- Baltic birch body doesn't damage blades, saw, or molding
- 1 jig included; miter saw not included
- 2 pounds; 2-year limited warranty; made in USA
|
Product Description
Crown Molding Cutting Jig - CROWN MOLDING CUTTING JIG. Produces perfect fitting miters every time. Crown stop quickly adjusts to lock molding. Fits all 10" & larger miter saws
Product Description
There's no denying that nearly everyone loves crown molding, but cutting the molding is no picnic—even for some pros. That's because crown molding gets installed at an angle against the wall and ceiling, and precise cuts are required to obtain tight-fitting corner joints. Complicating the situation is the fact that crown molding is expensive; it only takes two or three miscuts to blow your budget. But don't despair you can end the trepidation and frustration with the Bench Dog 10-010 Crown-Cut Jig. This surprisingly simple device provides a quick, foolproof way to cut crown molding, even for novice do-it-yourselfers. Crown-Cut is designed to work with any 10-inch or larger power miter saw, and it'll accommodate crown moldings up to 6 inches wide. The jig is made of Baltic birch plywood and it plastic stops and steel tabs that adjust to match the molding's height and distance it projects from the wall. To use the jig, simply set it onto the saw table and adjust it to match the molding size. Then place the molding into the jig and it'll automatically be held at the proper wall angle. Set the saw blade to 45 degrees, and make the cut. This method is much easier than holding the molding flat on the table and setting the saw for a compound angle cut, which requires figuring out both bevel and miter angles. -- Joseph Truini
|
|
|
Makita 192118-2 Extension Kit
By: Makita
Our price: $42.20
- Set of two holders
- Fits model numbers ls1030 and ls1011
|
Product Description
HOLDER ASSEMBLY LS1011 LS1030
|
|
|
Biesemeyer 78-806 6 foot Miter Table System For 10-Inch Saw, 5-1/2-Inch Table Width
By: Biesemeyer
Our price:
$175.73
List price:
$261.00
You save
$85.27
(
33%)
- For 10-inch Miter Saws
- Fits right or left sides of most 10-inch and 12-inch motorized miter saws
- Built-in slot to eliminate buildup of dust and chips
- Installs easily; 5-1/2-inch table width
- Sturdy welded steel frame
|
Product Description
The Biesemeyer 78-806 6-foot Miter Table System For 10-inch Saws comes with a 5-1/2-inch table width to support wide stock. Constructed of 3/4-inch laminated particle board edged with 3/4-inch black T-moulding, this table offers extra fence and table support for improved cutting accuracy and increased production. This table is designed to fit either the right or left side of most 10-inch and 12-inch motorized miter saws and 10-inch slide saws. Simple to install, the system easily mounts to a counter top, and the saw is shimmed to match the height of the table. Other features include a built-in slot to eliminate buildup of dust and chips and a sturdy welded steel frame.
|
|
|
Rousseau 6000L 60-Inch Stop System
By: Rousseau
Our price:
$139.35
List price:
$199.00
You save
$59.65
(
30%)
- 60-inch long uses two stops for accurate cut out to 10 -1/2 inches
- Both stops have adjust hairline indicators for proper alignment
|
Product Description
Dual stop system fits model
|
|
|
Fuller Tool 893-7001 Flextension 12-Inch 1/4-Hex Drive Flexible Bit Tip and Drill Extension Accessory with 10 Bit Tip Assortment
By: Johnson Level & Tool
Our price:
List price:
$13.19
You save
(
%)
- Flexible extension bends, twists and turns
- Allows you to drill around corners where there is a tight fit
- 11-piece set
- Includes insert bits and a bit carrying case
- Designed for multi-bit screwdrivers and power drills
|
Product Description
The Fuller 11-Piece Flexible Extension Set includes the Flextension extension and ten insert bits. Designed for multi-bit screwdrivers and power drills, this flexible extension bends, twists and turns. It even allows you to drill around corners where there is a tight fit. This set comes with a handy bit carrying case.
|
|
|
Biesemeyer 78-808 8-foot Miter Table System For 10-Inch Saw, 5-1/2-Inch Table Width
By: Biesemeyer
Our price:
$254.97
List price:
$322.20
You save
$67.23
(
21%)
- For 10-inch miter saws
- Fits right or left sides of most 10-inch and 12-inch motorized miter saws
- Built-in slot to eliminate buildup of dust and chips
- Installs easily; 5-1/2-inch table width
- Sturdy welded steel frame
|
Product Description
For 10" Miter Saws.
Product Description
The Biesemeyer 78-808 8-foot Miter Table System For 10-inch Saws comes with a 5-1/2-inch table width to support wide stock. Constructed of 3/4-inch laminated particle board edged with 3/4-inch black T-moulding, this table offers extra fence and table support for improved cutting accuracy and increased production. This table is designed to fit either the right or left side of most 10-inch and 12-inch motorized miter saws and 10-inch slide saws. Simple to install, the system easily mounts to a counter top, and the saw is shimmed to match the height of the table. Other features include a built-in slot to eliminate buildup of dust and chips and a sturdy welded steel frame.
|
|
Complete List of Tools
Complete List of
Outdoor Products
|
Canada
UK
Germany
