|
Wixey WR300 Digital Angle Gauge
By: Wixey
Our price:
$38.99
List price:
$39.99
You save
$1.00
(
3%)
- 0.1 degree resolution, accuracy, and repeatability
- Works great for miter saws and table saws
- Resolution 0.05mm, 0.001-inch, 1/64-inch
- Magnets attach to saw blades and cast iron table tops
- unctions include an ON/OFF button and a ZERO button
|
Product Description
With the Wixey WR300 Digital Angle Gauge, you can read precise angles in seconds. It has built-in super strong magnets that securely attach the gauge to a saw blade. You can quickly and easily set the bevel angle to 0.1 resolution. It works great for miter saws and table saws, plus you can set the angle of jointer fences and band saw tables.
Product Description
Its now easy to achieve perfect pre-set stops or set your saw for any angle in between. Tired of leaning over trying to "see light" between a square and your table saw blade to get exact 90 or 45 degree cuts? Need 22.5 degrees for that curio cabinet corner? Now its easy to achieve perfect pre-set stops or set your saw for any angle in between. Set the Wixey Digital Angle Gauge on your table saw top, close to the blade, and push the zero button, then attach it to your blade with the built in magnets. Simply adjust your blade until the desired angle appears on the easy-to-read digital display. Display is in 0.1 degree increments. Count on the Wixey Digital Angle Gauge to give you accurate angle settings every time.
|
|
|
Calculated Industries 6025 Scale Master Pro Digital Plan Measure
By: Calculated Industries
Our price:
$59.95
List price:
$69.95
You save
$10.00
(
14%)
- 72 Built-in scales for more versatility, 39 imperial (feet-Inch) and 33 metric
- 6 Custom Scales, 3 each for imperial and metric units, lets you "roll" or define any scale from plans that have been reduced, enlarged, faxed or are otherwise out of scale
- Calculate area, volume, height, length, width for imperial and metric units
- Manual Count while rolling for studs, piers, outlets or other items. Subtract function to remove the last distance measured
- Includes 2 long-life 3-volt batteries, hard cover protective case, English User Guide, multi-language available on corporate website
|
Product Description
Get fast, accurate linear, area and volume takeoffs from blueprints, drawings, and maps with the Scale Master Pro digital plan measure (model 6025) from Calculated Industries. It's ideal for contractors, landscapers, fencing specialists, plumbers, and anyone needing fast, accurate takeoffs from plans and blueprints.  Get fast, accurate linear, area, and volume takeoffs from blueprints, drawings and maps (view larger). Specifically designed to simplify takeoffs from architectural and engineering drawings, it finds linear measurements of any shape--as well as rectangular areas and volumes--and it converts between scales and dimensions. The Scale Master Pro comes with 72 built-in scales (39 imperial and 33 metric for maximum versatility). It also features six custom scales (three each for imperial and metric units), enabling you to define any scale, even from plans that have been reduced, enlarged, or are just out of scale. You can easily store the new scale permanently into the device for future use. Other features include two built-in memories; dedicated length, width, and height keys; push-button counter to keep track of items while rolling; switch for locking in mode, scale, and units while rolling; and a subtract key that allows you to deduct rolled distances. It's powered by two CR2032 lithium batteries, and the Scale Master Pro has an auto shut-off feature that turns the device off after about 4 to 6 minutes of non-use. After powering back on, all registers and settings remain intact, including all temporary registers. The Scale Master Pro measures 7.3 x 1.9 x 0.6 inches, weighs 2.1 ounces, and is backed by a one-year limited warranty. What's in the Box Calculated Industries 6025 Scale Master Pro digital plan measure; hard cover protective case; user guide; batteries  | 6025 Scale Master Pro Digital Plan Measure
At a Glance: - Complete takeoffs from blueprints and plans with speed and accuracy
- Ideal tool for preparing bids and estimates from plans in the field or office
- 72 built-in scales support imperial and metric
- Six custom scales for out-of-scale drawings
- Powered by two CR2032 lithium batteries
- One-year limited warranty
| |  | |
Product Description
72 built in scales, 39 imperial (feet and inch), and 33 metric for maximum versatility in architectual, engineering, and civil scaling. 6 custom scales. 2 built in memories solve area and volume. Store and recall length, width, and height values. Accumulate linear, area, and cubic values. Provides most needed dimensional units. Subtract key allows you to subtract rolled distances. Boxed.
|
|
|
iGaging Digital Magnetic Level + Protractor + Bevel Gauge (3 in 1 tool)
By: iGaging
Our price:
List price:
$35.00
You save
(
%)
- Great for your table saw, jointer, bandsaw or drill press
- CNC machined to a squareness of 0.0005"
- Uses a U.S. made navigational sensor
- Strong magnets hold the unit to any metal surface
- Spare battery included
|
Product Description
Take the guesswork out of setting up those critical bevel cuts on your table saw, jointer, bandsaw or drill press table. Just set the unit on a flat reference surface, press the ZERO button to calibrate the display then attach it to the saw blade, fence, etc. and precisely adjust to the desired angle. The Angle Cube is CNC machined to a squareness of 0.0005" and uses a U.S. made navigational sensor that is compact, offering 0.2 degree accuracy with a resolution of 0.05 degrees at a range of 90 degrees. The large LCD screen makes it easy to read while strong magnets hold the unit to any steel or cast iron surface. Spare battery included, measures 2 3/8" x 2 3/8" x 1 3/8".
|
|
|
Grizzly G9849 Magnetic Base/Dial Indicator Combo - President's Special
By: Grizzly
Our price:
List price:
$22.75
You save
(
%)
|
Product Description
Precision measurements and set-ups have never been so easy. Magnetic base engages with just the turn of a switch and allows pinpoint adjustment. The dial indicator features 0-1" travel and has a resolution of 0.001". This fine set includes a molded case for protection and convenience.
|
|
|
Extech 480172 AC Line Splitter
By: Extech
Our price: $15.99
- Allows clamp meter to measure AC current on a 2-wire or 3-wire power cord
- Provides easy and safe measurements of current without the need to cut off the plug and separate the conductors
- Plugging the power connector into the line splitter separates the hot/live conductor from the neutral (and ground)
- Also features voltage check function
|
Product Description
Receive accurate voltage measurements easily and safely with the Extech 480172 AC Line Splitter. Plugs into a normal 3-wire outlet, and enables user of a clamp meter to measure current up to 15 Amps.
|
|
|
Robert Larson 800-2875 Plastic Center Finder
By: Robert Larson Co
Our price:
List price:
$3.49
You save
(
%)
- Round stock capacity 8?
- Octagon stock capacity 8?
- Hexagon stock capacity 5 3/4?
- Square capacity 8?
- Handy for all woodworkers
|
Product Description
Finds exact center in seconds with no calculations. Gives center of round, square, hexagon, and octagon stock for turning in a lathe or other purposes. Maximum 8" circle and octagon, 8" square, and 5 3 4" hexagon.
|
|
|
INCRA Miter1000/HD Miter Gauge
By: Incra
Our price:
$164.99
List price:
$189.95
You save
$24.96
(
13%)
- 180 Angle LOCK Indexing Stops with 1-Degree Step Spacing and Special Stops at ±22-1/2-Degree
- Patented Glide LOCK Miter Bar Expansion Disks Provide a Perfect Fit
- Heavy Duty Machined and Laser Cut Components. Patented Incremental Flip Shop Stop for Prefect Cut Length Control
- 1/10th-Degree Vernier Cursor, Telescoping Fence Expands from 18-Inch to 31-Inch Overall Length
- Removable Retaining Clip for T-Slot Miter Channels
|
Product Description
The new INCRA Miter 1000HD is the most refined model yet in the Miter 1000 series. The HD stands for High Definition, because the protractor plates exclusive AngleLOCK Indexing System has a whopping 180 angle stops in 1degree increments with special stops located at 22.5 degrees. Combine that high-resolution protractor with the industrys smoothest adjustable miter bar, telescoping IncraLOCK cut-off fence and Flip Shop Stop, steel vernier scale that reads to 1/10 degree, and youve got a winner that will improve the quality of any project. Are you cutting parts for segmented turning? The Miter 1000HD will allow you to precisely set and quickly duplicate any angle you might need, whether its 18 degrees for cutting 10 sides, 25.7 degrees for 7-sided objects, or anything else imaginable.
|
|
|
Incra MITERV27 Miter V27 Miter Gauge
By: Incra
Our price:
$64.99
List price:
$72.74
You save
$7.75
(
11%)
- Miter Gauge featuring 27 angle stops for precise incremental control
- No-nonsense design and compact size
- Delivers extreme miter cutting accuracy
- Four expansion points adjust for zero side play
- Universal Mounting Bracket supports any user-made fence
|
Product Description
Get perfectly accurate miter cuts with Incra's Miter V27 Miter Gauge featuring 27 angle stops for precise incremental control. This affordable gauge is a high performance miter gauge designed to fit your table saw, band saw, router table, disk sander, or belt sander like a glove. While the V27 delivers all of the accuracy of its bigger Incra Miter Gauge brothers, its no-nonsense design and compact size make it the most affordable Incra miter gauge in its class. The V27 delivers extreme miter cutting accuracy thanks to Incra's exclusive AngleLOCK indexing system and adjustable GlideLOCK Miter Bar. Equipped with Incra's exclusive AngleLOCK Indexing System, the MITERV27 offers 41 locking angle stops in 5-degree increments over a full 180-degree range, and allows for plus or minus 60-degree range miter cuts. Special stops at plus or minus 22-1/2 degrees for optimal versatility. Incra's Flip Shop Stop offers instant, repeatable accuracy for less downtime and more productivity. Dual, pivoting flip arms mean dead on accuracy. The machine bar is fitted with Incra's exclusive top-mounted, T-slot retainer clip, which is easily removed for use in non-T-slot channels. Four expansion points adjust for zero side play, anti-friction travel on all tools with standard miter gauge channels, including Delta, Craftsman, and imports. This means the bar won't wiggle around in the miter slot. Also, with the Universal Mounting Bracket that supports any user-made fence as well as any Incra fence, it's possible to put an Incra Miter Gauge in every standard miter channel in your shop.
Product Description
Discover the newest and most affordable addition to Incras popular line of precision, state-of-the-art Miter Gauges. The V27 is engineered to provide a high performance, yet low cost upgrade to your table saw, band saw, router table, disk sander, belt sander or any other tool in need of a better Miter Gauge. Like all Incra Miter Gauges, the V27 delivers extreme miter cutting accuracy through the advanced combination of Incras exclusive AngleLOCK indexing system and its patented Adjustable GlideLOCK Miter Bar. 27 Precision V-Stops are laser-cut in solid steel to lock-in angles at exact 5 degree steps over a full 120 degrees range, with special stops at plus and minus 22.5 degrees. An oversized clamping knob allows cutting angles to be securely set anywhere between 5 degree stops. Four patented expansion disks adjust the GlideLOCK Miter Bar for zero side play, anti-friction travel on all shop tools with standard (or near standard) miter gauge channels. All of the V27s incredible precision will actually show up in your work because the bar cant wiggle around in the slot. Vertical work support surface doubles as a Universal Mounting Bracket that makes it easy to add just about any fence if you ever need one
|
|
|
Wheaton Tools PL200 Stair Wizard
By: Wheaton Tools
Our price:
$143.04
List price:
$169.99
You save
$26.95
(
16%)
- For all types of treads-hardwood, rubber, vinyl, etc.
- Creates a complete template of each tread and riser then guides you to a
- Perfect cut--reduces installation time by 40-50%
- A beautiful easy to use tool. hand crafted out of northern hard maple.
- Folds up for compact storage, comes with a rugged case.
|
Product Description
The Stair Wizard is the finest stair tread and riser gauge available anywhere that will allow you to install wall-to-wall type treads in half time of traditional methods. The Stair Wizard works by creating an exact template of each tread (or riser), including length, end angles and depth Simply scribe the tread bank along the template outline, or use the Stair Wizard itself as a cutting guide. It automatically allows for and desired tread overhang, and will accommodate stairs up to 14-inches deep and 53-inches wide. Extensions are available. Complete with case.For all types of treads-hardwood, rubber, vinyl, etc.Creates a complete template of each tread and riser then guides you to aPerfect cut--reduces installation time by 40-50%A beautiful easy to use tool. hand crafted out of northern hard maple.Folds up for compact storage, comes with a rugged case.
|
|
|
Empire Level 2760 Screw ID Gauge, SAE Standards 1 to 5/16-Inch
By: Empire Level
Our price:
$12.83
List price:
$14.82
You save
$1.99
(
13%)
- SAE standards - #1 to 5/16-Inch
- Tempered steel 5/64-Inch thick, 5-1/8-Inch long
- Used to identify size of screws, bolts, rivets, wires, pins with length, diameter, wire size, screw pitch, and clearance drill size
|
Product Description
Brand new Empire Level Screw ID Gauge A must have accessory for any size or type of shop, Makes it easy to identify the diameters of screws, bolts, rivets, wires and drill bits, Sturdy tempered steel construction, a full 5/64" thick to stand up to regular use and abuse, Measures SAE increments from #1 to 5/6", High contrast markings are bright and easy to read
|
|
|
Kreg KMS7729 3.5 Meter Self Adhesive Measuring Tape (L to R)
By: Kreg
Our price: $8.69
- 3.5 meter tape
- Metallic, scuff resistant
- Self-Adhesive
- Trim with scissors
- Left to right reading
|
Product Description
1/2" wide self-adhesive measuring tape fits snugly into the indentation on the topside of Top Trak and Heavy Duty Trak. Metallic tape is highly scuff resistant and can be trimmed to length with scissors. Be sure to choose the correct tape orientation; left-to-right reading to the right of the saw blade, right-to-left reading to the left of the saw blade.
|
|
|
Woodpeckers Saw Gauge
By: Woodpecker's
Our price:
List price:
$79.99
You save
(
%)
- Perfect for both rip fence and saw blade alignments.
- Automatically adjusts to the width of the miter slot.
- Includes new lockable, plastic case with laser cut foam to fit the loose parts.
|
Product Description
Woodworkers spend hundreds or even thousands of dollars on a table saw then spend hundreds more on high quality saw blades and still get burn marks when doing rip cuts. Even getting accurate results with a miter gauge can be difficult when the blade alignment is off. In most cases this is the result of misalignment between the miter slot, fence and blade.
For a perfect cut, the saw blade and rip fence must be dead parallel to the left hand miter gauge slot. The most reliable and accurate way to do this is with a dial indicator and tool that rides perfectly up and down the miter slot.
The new Woodpecker Saw Gauge is engineered to expertly satisfy this need. It's the first alignment tool that automatically adjusts to the width of the miter slot through the use of three precision ground steel pins. Regardless whether the slot is 5/8" wide like many older saws, ¾" wide like most current models or even somewhat over-sized; this unique arrangement will ensure a perfect fit and smooth traveling up and down the miter slot. No tools, no adjustments, just instant alignment.
Another exclusive feature is its ability to be set one distance to align the blade then in an instant be reset to a different distance for checking the fence and back to the exact original location for comparison measurements. No knobs, no tools, no recalibration.
|
|
|
Wixey WR200 Digital Height Gauge with Fractions
By: Wixey
Our price:
$54.95
List price:
$59.99
You save
$5.04
(
8%)
- Displays inches with fractions or millimeters
- Large easy to read display
- Resolution 0.05mm, 0.001-inch, 1/64-inch
- Stable magnetic base for easy positioning
- Lays flat for fence-to-router bit positioning
|
Product Description
You no longer need to align a rule or mess with set up blocks when youre trying to accurately set router bit or table saw blade height. The 1-1/2" x 4" base features a magnetic strip to help hold the gauge in position while the large digital readout lets you set your cutter height to exactly the depth you need. Fast, accurate and repeatable cutter height setting allows you to make precise cuts and repeat your set ups. The shape of the anvil lets you use the gauge to set router fence position up to 4-1/2". Displays both fractions and the decimal equivalent at the same time so you know your fraction is exactly on, not rounded up or down like other fraction read outs. Accurate to +/- .001", 1/500", or .025mm
|
|
|
Wixey WS060 6-Inch Precision Scale, Stainless Steel
By: Wixey
Our price:
$6.50
List price:
$6.00
You save
(
%)
- Super precise
- Hardened stainless steel
- 1/64-inch, 1/32-inch, 1mm, and .5 mm increments
- Etched and black filled graduations
|
Product Description
These rigid stainless steel scales are 3/4 In. wide, .040 In. thick, with 1/2 mm they have 1 mm increments on one side, 1/64 In. and 1/32 In. on the other. There are 1/32 In. end graduations for checking router settings. Displays high precision for a lifetime of accurate measuring. These stainless steel scales have been heat treated and tempered. The precise graduations are photo-chemically etched and black filled for easy reading. Perfect size to carry in your shirt or apron pocket.
|
|
|
CTA Tools A308 Offset Valve Tappet Gauge Set
By: CTA Tools
Our price: $9.06
- Set Includes 2 Handles and 11 Feeler Blades
- Blades Sizes Range From 0.004-Inches to 0.014-Inches
- Blades Insert Into Handle Easily
- Makes Valve Adjustment a Breeze
- All Feeler Blades Have Metric Markings
|
Product Description
CTA Tools A308 Offset Valve Tappet Gauge Set is a blade set that features 2 handles and 11 blades. The A308 is designed for use when setting valve tappets and makes valve lash adjustment easy. Insert proper offset blade to adjust intake and exhaust settings. Blades insert into handle easily and all blades come with metric markings on 11 sizes, ranging from 0.004-inches to 0.014-inches. Whether tuning up your â68 Corvette or changing the oil on a John Deere tractor, CTA can supply you with the tools needed to do the job.
|
|
|
Leica D330i Disto with Bluetooth Technology and Smart Horizontal Mode
By: Leica Geosystems
Our price: $379.00
- Measuring range 1.6 -Inch -325-Feet Typ accuracy ± 1/16 -Inch (+/-1.0mm true)
- Bluetooth
- Calculate area, volume, Pythagoras, triangle area
- Illuminated 4-line display
- Inclination measurement (± 45-Degree)
|
Product Description
Now the Leica DISTO D330 is also available with bluetooth and becomes the DISTO D330i. With this technology, measurement results can be wirelessly and accurately transferred to Windows based PCs. Functions/features include: Smart Horizontal Mode- Thanks to the combination of distance and tilt measurements you can determine the horizontal distance precisely and simply. If you take a measurement at an inclination of ± 45 -Degree, the Leica DISTO D330i always calculates the shortest distance. So you can measure quickly and easily, even over the top of objects and people. Multiple functions-The Leica DISTO D330i can calculate rectangular and triangular areas, volumes, room dimensions and various types of Pythagoras functions. A time delay release and enough memory for up to 20 measurements round off the instruments wide range of functions â a concept designed to make your work life easier. bluetooth- With integrated bluetooth technology, measurement results can be wirelessly and accurately transferred to PCs. Thus you can easily process your data in Excel, Word, AutoCAD and other programs. Brilliant and clearly arranged display-The results are displayed on the large (2-Inch), clearly arranged and high contrast display. At the touch of a button, the display makes supplementary information available about the measurements, e.g. indirect height, room dimensions, angle information or room angles. Free software-The delivery package contains the transfer software Leica DISTO Transfer easy to install and with automatic updates. The AutoCAD plug-in additionally allows convenient planning and drawing with your AutoCAD software. The D330i comes complete with 2-AAA batteries, nylon holster, software, quick start guide, and userâs manual on CD.
|
|
|
Oneway Multi Gauge
By: ONEWAY MANUFACTURING
Our price:
List price:
$79.95
You save
(
%)
- Solid 1 1/4 " thick cast iron
- Machined 90 degrees on three sides
- Includes dial indicator
|
Product Description
This multi purpose tool revolutionizes dial indicator usage in the work shop. Originally designed for setting exact height adjustments of jointer knives and accurately setting jointer cutting depth, uses for this versatile tool do not stop here. The solid 1-1/4" thick cast iron frame is precision machined at 90 degrees on three sides so you can check squareness of, or accurately position, joiner fences, saw blades or tilting tables of scroll saws and drill presses. The dial indicator has 1-1/32" of travel for a full 1" measurement in .001" increments. Dial indicator includes a round tip for checking run out and flat tip for saw blade, dado head, or router bit height adjustments.
|
|
|
INCRA MiterV120 Miter Gauge
By: Incra
Our price:
$75.00
List price:
$84.95
You save
$9.95
(
12%)
- 120 Angle LOCK Indexing Stops
- 1 Degree Stop Spacing with Special Stops at ±22-1/2 Degrees
- Patented GlideLOCK Miter Bar Expansion Disks Provide a Perfect Fit
- Removeable Retaining Clip for T-Slot Miter Channels
- All Steel Machined and Laser Cut Components
|
Product Description
The Miter V120 from INCRA has the precision of a higher price-point miter gauge while offering a price that makes it an affordable upgrade to your stock miter gauge. 120 AngleLOCK Indexing Stops. 1 Degree Stop Spacing with Special Stops at +/- 22-1/2 degrees. Patented GlideLOCK Miter Bar Expansion Disks Provide a perfect fit. Removable retaining clip for T-Slot miter channels. All steel machined and laser cut components.
|
|
|
Calculated Industries 6335 Scale Master ProXE Advanced Digital Plan Measure with PC Interface
By: Calculated Industries
Our price:
$129.95
List price:
$149.95
You save
$20.00
(
13%)
- 91 Built-in scales for more versatility, 50 imperial (feet-Inch) and 41 metric
- 10 Custom Scales, 3 each for imperial and metric units, lets you "roll" or define any scale from plans that are out-of-scale. Permanently store new scale for future use
- Constant (+K) allows you to add/subtract a constant value to a distance measured for take-outs and add-ons. Calculate area, volume, height, length, width for imperial/metric units
- Built-in Auto Counter to count how many times a pre-set distance has been rolled. Manual Count while rolling for studs, outlets, or other items. Subtract function to remove the last distance measured.
- Includes 2 long-life 3-volt batteries, hard cover protective case, English User Guide, 15-Feet PC interface cable with plug-n-play connectivity
|
Product Description
Scale Master® Pro XE makes it easy to do Linear, Area and Volume takeoffs with speed, accuracy and confidence when estimating, bidding or planning. The Scale Master® Pro XE provides transfer capabilities from plans, blueprints and maps as well as out of scale drawings. Utilize 91 built-in Scales; 50 Imperial (Feet-Inch) units and 41 Metric, (including ten custom scales for out-of-scale drawings) for maximum versatility with architectural, engineering and civil scales.
The included PC interface cable lets you transfer rolled values from the Scale Master® Pro XE directly into commonly used spreadsheets or estimating programs, saving countless keystrokes, saving time and reducing the potential for costly transcribing errors.
Product Description
The Scale Master ProXE digital plan measure (model 6335) from Calculated Industries makes it easy to do linear, area and volume takeoffs with speed, accuracy and confidence when estimating, bidding or planning. You can also connect it to your PC with the included interface cable and transfer rolled values directly into commonly used spreadsheets or estimating programs--saving countless keystrokes, saving time and reducing the potential for costly transcribing errors.  Get fast, accurate linear, area, and volume takeoffs from blueprints, drawings and maps (view larger). Offering an ergonomic design with comfort grip and improved weight balance, the Scale Master ProXE features dedicated function keys and a dual LCD display for left- or right-hand use. Its 91 built-in scales help you measure plans, blueprints, and maps--50 imperial (feet-inch) and 41 metric for maximum versatility in architectural, engineering and civil/map scaling. Save up to 10 custom scales for calibrating out-of-scale plans and plan books. You can easily store a new scale permanently into the device for future use. An auto count function automatically counts how many times a pre-set distance has been rolled, great for stud counts, columns, fence posts, outlets, fixtures or any other regularly spaced items. It includes such time-saving utilities as a lock switch to prevent changing the mode and scale while rolling, an Imp-Met switch to instantly change between imperial and metric units, and an accumulating memory function (M+) for easy totaling of dimensions or counts--ideal for multi-page plans. The plug-and-play PC interface connects to your computer via USB, and it's compatible with Windows PCs. It's powered by two CR2032 lithium batteries, and the Scale Master ProXE has an auto shut-off feature that turns the device off after about 4 to 6 minutes of non-use. After powering back on, all registers and settings remain intact, including all temporary registers. The Scale Master ProXE measures 7.3 x 1.9 x 0.6 inches, weighs 2.1 ounces, and is backed by a one-year limited warranty. What's in the Box Calculated Industries 6335 Scale Master ProXE digital plan measure; protective case; 15-foot USB cable; CD-ROM with multi-lingual user guide; batteries  | 6335 Scale Master ProXE Advanced Digital Plan Measure At a Glance: - Complete takeoffs with speed and accuracy
- Ideal tool for preparing bids and estimates from plans in the field or office
- 91 built-in scales support imperial and metric
- 10 custom scales for out-of-scale drawings
- Transfer rolled values directly into your Windows PC
- Includes 15-foot USB cable
- Powered by two CR2032 lithium batteries
- One-year limited warranty
| | | | |
|
|
|
CTA Tools A311 25-Blade Extra Long Feeler Gauge
By: CTA Tools
Our price:
$13.43
List price:
$19.95
You save
$6.52
(
33%)
- Set Includes 25 Blades That Are 12-Inches Long
- Blades Are Removable
- Designed for Long Reach Applications
- CTA Tools Offers One of the Widest Ranges of Professional Specialty Tools in the Market
|
Product Description
CTA Tools A311 25-Blade Extra Long Feeler Gauge is designed for long reach applications, especially diesel. There are 25 removable blades, each 12-inch long, that have metric markings. Blade sizes are 0.0015, 0.002, 0.003, 0.004, 0.005, 0.006, 0.007, 0.008, 0.009, 0.010, 0.011, 0.012, 0.013, 0.014, 0.015, 0.016, 0.017, 0.018, 0.019, 0.020, 0.021, 0.025, 0.027, 0.030 and 0.040-inches. Whether tuning up your â68 Corvette or changing the oil on a John Deere tractor, CTA can supply you with the tools needed to do the job.
|
|
Complete List of Tools
Complete List of
Outdoor Products
|
Canada
UK
Germany
