Pocket-Hole Jigs, Doorjamb and Hinge Templates and More

Featuring a removable drill guide for use with benchtop and portable bases, the Kreg Jig Master System is the ultimate pocket-hole jig, and a great choice for any woodworking enthusiast. For precision and accuracy, it offers 1/8-inch incremental settings for materials 1/2-inch to 1-1/2-inch thick and patented three drill guide fixed spacing on the drill guide. A dust collection shroud means no more woodchips, and the clamping recess allows you to use many different styles of clamps to secure your jig to the workbench. For peace of mind, the hardened steel drill guides are backed by a lifetime warranty.

Jig Master System At a Glance: Removable drill guide for use with benchtop and portable bases 1/8-inch incremental settings for materials from 1/2-inch to 1-1/2-inch thick Rear-mounted clamp design--rigidity and strength to keep workpiece in place Comes with portable base, SkillBuilder DVD, carrying case, and more Hardened steel guides with lifetime warranty

Sturdy benchtop jig utilizing the benchtop base for high-speed production Pocket-Holes.

Contractor-grade jig for work on the road with the portable base.

Three Tools in One
Thanks to its innovative Removable Drill Guide, the Kreg Jig Master System can be many tools at once. First, a sturdy benchtop jig utilizing the benchtop base for high-speed production pocket-holes, second as a contractor-grade jig for work on the road through use of the portable base, and finally as a high quality repair jig with the addition of spacer blocks to the bottom of the drill guide.

Serious Woodworking Tool with High-Quality Features
Between its solid clamp, large clamping recess, dust-collection attachment, material support stop, removable three-hole drill guide, and seemingly endless adjustability, this jig has it all. If you're serious about owning the highest quality tools, look no further than the Kreg Jig Master System.

Sturdy Toggle-Clamp
The Kreg Jig Master System features the same reliable rear-mounted clamp design featured on the very first Kreg jig. It's a proven design offering incredible rigidity and uncompromising workpiece hold-strength. Adjustments are as easy as releasing the lock-nut, and rotating to the correct setting.

In addition, the large clamping recess makes it easy to secure the jig to the workbench using Kreg's multi-purpose face clamps or any common bar clamp or c-clamp.

Removable 3-hole drill guide.

Three-Hole Drill Guide with Steel Core
The patented three-hole drill guide lets you make perfectly placed pocket-holes in a wide variety of material widths and thicknesses. Every Kreg drill guide features a hardened steel core that carries a full lifetime guarantee. The core shrouds the bit and supports the workpiece through 100% of the drill-stroke, resulting in minimal bit deflection, reduced tear-out, and a clean pluggable pocket-hole.

Durable Construction and Optimized Drilling Angle
The blue body of the every Kreg jig is made from a heavy-duty glass-reinforced nylon, a unique composite material that offers the resiliency and flexibility you need without sacrificing strength and durability. To increase driving efficiency and minimize the overall size of the pocket-hole to less than 1-1/2 inches, this system also features an optimized drilling angle.

Wood-Chip Relief Hole Extends Bit Life
The Kreg Jig Master System includes one wood-chip relief hole for every drill guide hole, designed to keep the drill bit clear of excess wood chips, minimize drill torque, increase the longevity of your drill bits, and allow you to complete a perfect pocket-hole in one plunge instead of three.

What's in the Box
Kreg Jig Master System, face clamp, portable base, drill guide spacer, material support stop, dust collection attachment, 3/8-inch stepped drill bit, six-inch square driver, three-inch square driver, starter screw set, starter plug set, quick-start guide, SkillBuilder DVD, and carrying case.

The Kreg Jig Jr. (R3) is an amazing repair jig and an exceptionally handy addition to any tool collection. Whether you're crawling under a table to make a quick repair or taking Kreg Joinery on the road, the Jr.'s compact design lets you work where you need to most, and it gives you what you need to start building wood joints that will last the life of your creation.

The Kreg Jig® Jr. offers: A compact design that lets you work wherever you need Easy-press positioning sliders with 9 settings 2-Hole Drill Guide with Hardened Steel Core and Lifetime Warranty Convenient design can be used with any standard bar clamp or a c-clamp

Miter joints for picture frames can be completed quickly, since the positioning legs move independently of one another. View larger.

The Kreg Jig Jr. is built to work with any style of clamp and adjusts easily for different material thicknesses. View larger.

Adjusting the Kreg Jig Jr. for different applications is quick and easy. View larger.

Kreg Joinery: No Glue or Complicated Math Required
The Kreg Jig Jr. takes advantage of a technique called Kreg Joinery. Unlike other techniques, Kreg Joinery requires no glue, no complicated math, and no small army of clamps to make wood joints that will last.

With Kreg Joinery, you can finish projects in hours instead of days. You won't spend any time clamping, waiting for glue to dry, or wading through complicated math. It essentially involves drilling a hole at an angle into one workpiece, and connecting it to another workpiece with a self-tapping screw.

Amazingly Strong with Half the Effort
Unlike mortise and tenons, dowels, and biscuits, the self-tapping screws inside of every Kreg Joint hold the stock together without glue. You don't have to worry about precisely lining up dowel holes, or spending hours cutting a perfect mortise and tenon--you simply drill the holes, drive the screws, and move on to the next project.

And because what you see is what you get with Kreg Joinery, you won't spend all your time calculating stock-overlaps and dry-fitting individual workpieces. All you need is simple math to get fast and accurate results.

Kreg Jig Jr: The Perfect Home-Repair Tool
The Kreg Jig Jr. is an amazing repair jig with a compact design that lets you work where you need to most. Thanks to its Clamp Pad Adapter, the Jr. can be secured to the workpiece with any standard bar clamp or c-clamp. In addition, the adapter allows the jig to be attached directly to any Kreg Face Clamp (sold separately) for faster and more repeatable pocket-holes.

From thin drawer boxes and craft projects to stout 2x4's, this jig can handle them all. Independent Easy-Press positioning sliders feature nine separate depth settings, allowing you to easily join materials from 1/2-inch to 1-1/2-inches thick in 1/8-inch increments. And to set the jig properly, you simply depress the button on the side of the jig and move the sliders so your material thickness is aligned with the arrow on the jig body. It couldn't be any easier.

The Kreg Jig Jr. includes a compact, durable plastic carrying case that will ensure that you always have the tool, drill bit, and screws on hand to complete your next project. As a bonus, the case features a molded depth collar gauge for a handy reference.

In addition to the Kreg Jig Jr. (model R3), Kreg offers DIYers and anyone new to Kreg joinery the Kreg Jig (model K4). For serious wood workers, Kreg offers the Kreg Jig Master System (model K3MS), the ultimate kit for Kreg Joinery.

The Kreg Difference
While each Kreg Jig has its own features designed to meet the particular needs of its users, all Kreg Jigs share a design and high-quality construction which add up to the "Kreg Difference."

Kit includes everything you need to get started.

Each Kreg Jig features hardened steel drill guides that carry a 100-percent lifetime guarantee. The body of each Kreg Jig is made from a heavy-duty glass-reinforced nylon that offers the resiliency and flexibility you need without sacrificing strength and durability.

To create a cleaner pocket-hole and a more finished appearance, all Kreg Jigs shroud the bit and support the workpiece through 100-percent of the drill-stroke. The end result is minimal bit deflection, reduced tear-out, and a clean, pluggable Pocket-Hole fit for finished work.

Every Kreg Jig also features an optimized 15 degree drilling angle designed to increase driving efficiency and minimize the overall size of the Pocket-Hole. This same Pocket-Hole can be created by the Kreg Jig in materials from 1/2- to 1-1/2 inches thick.

The Kreg Jig Jr. includes a 30 Day Customer Satisfaction Guarantee and Lifetime Warranty on its Hardened Steel Drill Guide.

What's in the Box
Kreg Jig Jr., clamp pad adapter, stepped drill bit, 6 driver bit, depth collar, allen wrench, starter screw set, and durable carrying case.

Whether youre boring shelf pin holes in a new entertainment center or adding adjustable shelving in an existing cabinet, the Kreg Shelf Pin Jig will help you get the job done quickly and accurately.

8 Piece Dowel Center Set, Includes 2 Each: 1/4", 5/16", 3/8" & 1/2" Plated Steel Dowel Centers, Punch Marks Provide Accurate Dowel Hole Alignment.

The Kreg Jig (K4) is the perfect choice for do-it-yourselfers and anyone new to Kreg Joinery. Whether you're building your first set of garage storage shelves or making simple repairs around the house, the Kreg Jig can help you finish the job in less time, and with far less effort than you ever thought possible. Its simple design gives you the confidence to start the project, and with joints as easy as "Drill. Drive. Done!", you'll actually want to finish it.

The Kreg Jig® offers: A complete Kreg Joinery System for the DIYer A sturdy toggle clamp A large clamping recess lets you clamp the jig easily and securely to your work area A patented, 3-Hole Drill Guide with a Lifetime Warranty

With Kreg Joinery, you can make professional joints without glue for a wide variety of projects. View larger.

The Kreg Jig’s integrated clamping recess lets you easily secure the jig to your workbench. View larger.

Kreg's patented 3-Hole Drill Guide can be removed and used where you need it most. View larger.

Kreg Joinery: No Glue or Complicated Math Required
The Kreg Jig takes advantage of a technique called Kreg Joinery. Unlike other techniques, Kreg Joinery requires no glue, no complicated math, and no small army of clamps to make wood joints that will last.

With Kreg Joinery, you can finish projects in hours instead of days. You won't spend any time clamping, waiting for glue to dry, or wading through complicated math. It essentially involves drilling a hole at an angle into one workpiece, and connecting it to another workpiece with a self-tapping screw.

Amazingly Strong with Half the Effort
Unlike mortise and tenons, dowels, and biscuits, the self-tapping screws inside of every Kreg Joint hold the stock together without glue. You don't have to worry about precisely lining up dowel holes, or spending hours cutting a perfect mortise and tenon--you simply drill the holes, drive the screws, and move on to the next project.

And because what you see is what you get with Kreg Joinery, you won't spend all your time calculating stock-overlaps and dry-fitting individual workpieces. All you need is simple math to get fast and accurate results.

Kreg Jig K4: Ideal for the DIYer
The Kreg Jig is designed specially for the do-it-yourselfer or anyone new to Kreg Joinery. It can be used for endless applications around the house, helping you to save time and effort.

The Kreg Jig’s patented 3-Hole Drill Guide lets you make perfectly placed pocket-holes in a wide variety of material widths and thicknesses, without ever having to release the clamp and reposition the workpiece. Whether you're using one of Kreg's multi-purpose Face Clamps (sold separately) or any common bar clamp or c-clamp, the Kreg Jig's large clamping recess makes it easy to secure your jig to your workbench during use.

For the hard-to-reach repair applications, or when you just want to take your work on the road, the jig's removable Drill Guide guarantees that you'll always have the right tool for the job.

In addition to the Kreg Jig (model K4), Kreg offers serious wood workers the Kreg Jig Master System (model K3MS), the ultimate kit for Kreg Joinery. For basic woodworking or home improvement projects, the Kreg Jig Jr. (model R3) has what you need to get started.

The Kreg Difference
While each Kreg Jig has its own features designed to meet the particular needs of its users, all Kreg Jigs share a design and high-quality construction which add up to the "Kreg Difference."

Kit includes everything you need to get started.

Each Kreg Jig features hardened steel drill guides that carry a 100-percent lifetime guarantee. The body of each Kreg Jig is made from a heavy-duty glass-reinforced nylon that offers the resiliency and flexibility you need without sacrificing strength and durability.

To create a cleaner pocket-hole and a more finished appearance, all Kreg Jigs shroud the bit and support the workpiece through 100-percent of the drill-stroke. The end result is minimal bit deflection, reduced tear-out, and a clean, pluggable Pocket-Hole fit for finished work.

Every Kreg Jig also features an optimized 15 degree drilling angle designed to increase driving efficiency and minimize the overall size of the Pocket-Hole. This same Pocket-Hole can be created by the Kreg Jig in materials from 1/2- to 1-1/2 inches thick.

The Kreg Jig includes a 30 Day Customer Satisfaction Guarantee and Lifetime Warranty on its Hardened Steel Drill Guide.

What's in the Box
Kreg Jig K4, stepped drill bit, 6-inch square driver, starter screw set, starter plug set, SkillBuilder DVD, Quick-Start Guide, and durable carrying case.

Kreg's self-tapping screws were designed for its famous pocket-hole joinery, but that's not all they're good for. Kreg's self-tapping auger point eliminates time-consuming pre-drilling, and these screws are made from the highest quality steel, case-hardened and coated with a dri-lube finish. That means less driving torque for you. This coarse-thread screw has a larger thread diameter and provides greater holding power when driving a screw into soft material such as plywood, particle board, MDF, melamine and pine. The washer head offers a great surface area to seat the screw firmly and helps prevent overdriving. They're on the spendy side, but the quality is worth it.--Kris Jensen-Van Heste

The True-FLEX Featherboard gets its name from the careful engineering that went into its design. Many featherboards on the market today apply too much pressure or not enough pressure to the workpiece, resulting in imperfect cuts and less than safe operation. Each finger of the True-FLEX featherboard is designed to provide a consistent and optimum pressure. The featherboard is made from an extremely durable plastic composite body and includes an exclusive wedge-lock system. Whether youre using a miter-slot or a T-slot, working on a table saw or a router table, the wedge-lock system adjusts accordingly and lets you work with confidence. Contains two featherboards.

The Kreg Mini Kreg Jig Kit makes it easier to do pocket hole joinery with its no-fence design that allows for easy positioning in practically any location. This one-hole jig is especially useful for repair work on furniture or flooring. It comes with a 3/8-inch step drill bit, depth collar, and Allen wrench to set drilling depth, and a set of detailed instructions.

The Kreg Mini Jig is designed without an alignment fence which allows it to be clamped to virtually any angle or orientation to the edge of a workpiece. Simply clamp the guide in place and use the included step drill bit and stop collar to produce perfect pocket holes. Kit includes Mini Jig, HSS 3/8" diameter step drill, stop collar, and hex key. It is the pocket-hole solution for cabinetmaking.

Blue-Kote is the newest generation of rust-resistant screws from Kreg, providing up to 400 more weather resistance than zinc-plated screws. Its the best choice for the majority of exterior pocket-hole screw applications and general exterior construction. Deep square drive offers optimum driver engagement. Large Maxi-Loc head provides incredible hold strength. Blue-Kote finish provides an amazing weather-resistant finish. Case-hardened steel means no bending and no breaking. Self-tapping tip requires no pilot holes. This Blue-Kote #8 x 2-1/2" coarse washer-head screw comes in a 250 pack.

The Kreg Deck Jig helps you get the deck you want, without any unsightly exposed nails or screws. Designed to work exclusively with 4/4 to 5/4 (3/4-inch to 1-1/8-inch) composite stock without machined grooves, the Deck Jig's specialized self tapping screws are driven at a precise angle into the edge of your deck boards so they stay hidden from view. An easy-grip handle gives you a secure hold with complete control, and hardened steel drill guides keep your specialized stepped bit and driver bit at the precise, optimal angle. For added convenience, spacer rings ensure accurate deck board spacing and three separate drill guides let you install deck boards in a variety of hard-to-reach areas.

Deck Jig At a Glance: Create a beautiful deck surface, without exposed fasteners or splinters Easy-grip handle gives you a secure hold and complete control Steel drill guides keep stepped bit and driver bit at the optimal angle Three drill guides let you install deck boards in hard-to-reach areas Lifetime warranty

Easy-grip handle gives you a secure hold and complete control.

Three separate Drill Guides let you install deck boards in a variety of hard-to-reach areas.

Creates a Deck Surface Free of Exposed Fasteners and Splinters
Whether you're building a new deck or refinishing an old one, with the Kreg Deck Jig and a few simple tools you can create a beautiful and functional deck surface, completely free of exposed fasteners and painful splinters. Traditional concealed decking systems utilize awkward steel fasteners or thin plastic clips to hold your deck boards in place. The Kreg Deck Jig takes a more straightforward approach, creating an incredibly strong wood-to-wood bond through precisely placed self-tapping screws.

No exposed nails or screws.

The Deck Jig's specialized self tapping screws are driven at a precise angle into the edge of your deck boards so they stay hidden from view. Whereas seasonal changes might force traditional fasteners out of place with time, Kreg screws stay protected safely below the surface.

Three Simple Steps
Even better, securing a deck board with the Kreg Deck Jig takes only three simple steps--just drill holes, drive the self-tapping screws, and you're done.

Works with a Variety of Materials
The Deck Jig works best with composite materials, but it's also compatible with native softwoods such as redwood and cedar, along with certain tropical hardwoods like red balau, and ironwood. Please note: It works exclusively with 4/4 to 5/4 (3/4-inch to 1-1/8-inch) stock and is not designed for use with 2x material including 2x4s, 2x6s, 2x8s, etc.

About Kreg Deck Screws with Protec-Kote
This kit comes with Kreg Deck Screws with Protec-Kote. Designed specifically for use with the Kreg Deck Jig, these screws Protec-Kote screws feature three anti-corrosion layers which protect against rusting in a wide variety of decking applications.

And like all Kreg Deck screws, the ones included in this system feature a KTX #1 square drive to reduce cam-out, a flat-bottom head which resists splitting, and a self-tapping tip which drills its own hole as it's driven.

Lifetime Warranty
The Kreg Deck Jig is backed by a lifetime warranty.

What's in the Box
Deck Jig, 100 Protec-Kote deck screws, instructional DVD, 6-inch Deck Jig driller bit, 6-inch KTX square driver bit, three 5/16-inch spacer rings, three 1/4-inch spacer rings, two stop collars, one allen wrench, and carrying case.

With the Kreg Deck Jig and a few simple tools you already own, you can create a beautiful and functional deck surface, completely free of exposed fasteners and painful splinters! The Kreg Deck Jig creates an incredibly strong wood-to-wood bond through precisely placed self-tapping screws. Works great with composite deck boards and ACQ treated lumber. Also works with native softwoods such as redwood, cedar and pressure-treated pine. Even works with certain tropical hardwoods like ipe, red balau, and ironwood. Easy-grip handle gives you a secure hold and complete control over each and every joint. Hardened steel drill guides keep special stepped bit and driver bit at precise, optimal angle. Three separate drill guides let you install deck boards in a variety of hard-to-reach areas. Handy spacer rings ensure accurate deck board spacing for proper drainage and longer deck life.The Deck Jig System includes: Deck Jig, 6" Deck Jig drill Bit with stop collar, 6" KTX square driver bit with stop collar, 5/16" spacer rings (3), 1/4" spacer rings (3), Protec-Kote deck screws (100), Instructional DVD and Durable carrying case

The Jasper 200J Model 200 Circle Cutting Jig for Plunge Router allows you to make the clean circles that are needed in making speaker cutouts. The cutout sizes provided by the jig range in 1/16-inch increments from 2-1/4 inches to 18-3/16 inches. Its easy-to-read scale is calibrated for a 1/4-inch router bit, and this jig has precision-drilled pivot holes that hold pins in selected holes.

These Circle Jigs are clearly marked and simple to use. Each is CNC machined from 1/4" Plexiglass and are pre drilled to fit 19 different models of plunge routers. Instructions and necessary screws are included. Select the jig that fits your needs.

Kreg 2-1/2-inch #8 Coarse Washer-Head Pocket Hole Screws work well in 1-1/2-inch thick material. The washer head of this screw is a very popular head style, as the wide bearing surface of the head will not overdrive in the bottom of the pocket. This is especially important in softer material such as plywoods and composites. The screw also features a type 17 auger tip that self-taps its own hole, eliminating the need to predrill in even the hardest materials. Kreg screws also have larger diameter steel shanks than many other screws on the market today making for an impressively strong screw that is almost impossible to break. These screws have a bronze-colored finish and a dry-lubricant coating that eases driving torque and provides greater rust resistance.

2-1/2'' Coarse Thread self-tapping screws are specially designed for pocket hole joinery. They feature a self-tapping auger point that eliminates pre-drilling and a flat head that seats flushly in the bottom of the pocket hole.

The Kreg Magnetic Drawer Slide Mounting Tool simplifies the work of positioning your metallic slides to ensure smooth gliding drawer movement in cabinets. It uses the intersection of the cabinet stile and rail in face frame cabinets, and the cabinet side in frameless cabinets, as a reference point for positioning a slide perfectly parallel to the drawer opening. Simply place a metallic drawer slide into position on the base of the tool, which uses magnets to hold the slide in place, align the tool where the stile and rail meet, and drive the screws for a perfect alignment every time.

The Wolfcraft Dowel Quick Doweling Jig self-centers on boards to make quick, accurate dowel joints. Made of high impact plastic, this jig is capable of edge-to-edge, T, and edge-to-corner joints. The jig comes with 1/4-inch, 5/16-inch, and 3/8-inch diameter pins, and can be used on boards up to 1-1/4-inch thick. Other features include hole guides with hardened steel bushings, and the jig can be adjusted to the required front and back depth.

The Wolfcraft Dowel Quick Doweling Jig self-centers on boards to make quick, accurate dowel joints. Made of high impact plastic, this jig is capable of edge-to-edge, T, and edge-to-corner joints. The jig comes with 1/4-inch, 5/16-inch, and 3/8-inch diameter pins, and can be used on boards up to 1-1/4-inch thick. Other features include hole guides with hardened steel bushings, and the jig can be adjusted to the required front and back depth.

Includes Crown-Cut Polymer Cutting Jig - 10-027

Includes Feather-Loc Double Featherboard for Table Saws & Router Tables - 40-011

A featherboard is undoubtedly the most underrated router-table accessory of all time. When properly installed, its flexible fingers keep the workpiece pressed tightly against the router tabletop or router fence throughout the routing operation. The result is a dramatic increase in the accuracy, quality and safety of the cuts.

Now many woodworkers make their own featherboards from scrap lumber, but here's a better, safer option: the Bench Dog 40-011 Feather-Loc Double Featherboard. This popular router-table accessory consists of not one, but two industrial-quality featherboards. The featherboards are made from a high-tech polymer and each one has 13 angled fingers that apply steady pressure that consistently produces cleaner cuts with less chance of kickback, chattering or lifting.

The featherboards slide into miter-gauge slots in the router table or fence, and are locked in place by tightening a pair of knobs. Note that Feather-Loc Featherboards can also be used on a table saw, shaper, bandsaw or any other woodworking machine with a miter gauge slot. -- Joseph Truini

For both face frame and faceless cabinets, aligning the drawer box to full extension slides is simple with our drawer mounting brackets. Simply clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets, then pull the slide to the front of the box and drive your screws. The 12'' brackets work with most common drawer sizes, and the 1/8'' tabs on the front of the bracket are designed to fit under mounted full extension slides for perfect placement every time. Made of rugged, shock resistant plastic for years of service, these brackets are a great addition to your workshop and toolbox.

Kreg Drawer Mounting Brackets help align drawer box to cabinet slides for both framed and frameless cabinets. Just clamp a bracket under each slide, set the drawer box into the drawer opening so it balances on the brackets, pull the slide to the front of the drawer box, and secure it into position by driving a screw.

The Milescraft Model 1407 D/TFeatherBoard has the dual slide motion and unique pre-load tension design features of the 1406 FeatherBoard and includes a sturdy spacer for tall stock cutting operations. The D/TFeatherBoard includes two 3/4-Inch and two 5/8-Inch miter bars as well as four T-Slot bolts allowing it to be used as either dual OR tandem feather boards in nearly any application on router tables and table or band saws.