Levels -- Black & Decker, Denali, M-D Building Products, Stanley, Stabila, CST Berger, Empire Level and more

This self-leveling laser plumb bob creates an accurate, highly visible plumb reference instantly. 1 button, instantly transfer point from floor to ceiling. Creates an accurate, highly visible plumb reference instantly. Unique magnetically dampened self-leveling system settles plumb bob up to 20 times faster than conventional methods. Combines traditional plumb bob ease-of-use with laser-accurate alignment. Ideal for stud plumbing and alignment, ceiling joist and rafter alignment, establishing diagonals and footings for decks and patios, aligning and plumbing pipe or conduit, transferring points from floor to ceiling, fixture installation and alignment, e.g. lights, fans, etc. Magnetic base. Includes: Laser, carrying case, and instruction manual.

BULLS EYE AUTO LEVELING LASER LINE AND STUD FINDER *Patented auto-leveling technology *2 tools in 1 auto leveling laser level and stud sensor *Auto-leveling laser levels automatically without adjustments *Projects horizontal level laser line *Stud sensor detect wood, metal studs and live A/C wires *LCD display easy to read *Includes: protective storage case and batteries

The easy-to-read LCD makes identifying studs simple and quick.

The BullsEye makes leveling a snap.

About This BullsEye Laser Level
No more squinting at tiny vials or holding your breath while you wait for the bubbles to settle -- with the BullsEye laser, perfectly aligned pictures, shelves, and more are right at your fingertips. With Black & Decker's patented auto-leveling technology, BullsEye is the obvious choice for professionals or do-it-yourselfers who want the job done right the first time, and every time.

The BDL190S is two tools in one: an auto-leveling laser level and a super-sensitive stud sensor. The auto-leveling laser line levels automatically without adjustments, projecting a long, bright red laser line so there's never any question of where the hammer or drill should begin. The stud sensor detects wood, metal studs, and live A/C wires and displays the results immediately and clearly on the easy-to-read LCD. This advanced device includes a protective storage case and batteries, so it's ready to work or travel, right out of the box.

Key Technical Specs:

• Laser class: 2
• Detects: wood, metal studs, A/C wires
• Auto-leveling
• Easy-to-read LCD

Applications
Use the BDL170 to hang decorative items such as pictures or knick-knacks, shelving, or anything else that needs to line up perfectly. Warranty
Black & Decker tools and home products are covered for two years from the date of purchase.

What's in the box:
Black & Decker BullsEye auto-leveling laser level, 2 AA batteries, hanging cones, and protective case.

The Black & Decker BDL190S BullsEye Auto-leveling Interior Line Laser and Stud Sensor Combination Tool is an ideal tool for hanging pictures, detecting wood and metal studs, locating live A/C wires, and installing decorative items. With patented auto-leveling technology, this leveler is actually two tools in one--an auto-leveling laser level and a stud sensor. Its auto-leveling laser levels automatically without adjustments and projects horizontal laser lines. Other features include a stud sensor to detect wood, metal, studs, and live A/C wires and an easy to read LCD display. Categorized as a class II laser, this laser level comes backed by a 2-year limited warranty.

Pitch & Slope Locator, High Impact Plastic Body In Black, Clear Acrylic Lens With Easy To Read Graduations, Half Of The Scale Is Printed In 0-90 Degrees In 2 Quadrants, The Other Half Is A Patented Printed Scale For Reading Pitch In Inch Rise Per 12" Run Without The Use Of Conversion Tables.

The Johnson Level & Tool Pitch and Slope Locator is designed for carpentry, plumbing, electrical, or HVAC work requiring accurate pitch or slope identification. It's ideal for identifying roof pitch, stair slope, or drainage angles. Designed for durability and easy use, the pitch and slope locater features a high-impact plastic body, black in color, with a clear acrylic lens and easy-to-read graduations. Half of the scale is printed in 0-to-90 degrees in two quadrants. The other half is a patented printed scale for reading pitch in inch-rise per 12-inch run without the use of conversion tables. It is covered by a 1-year limited warranty.

Tough instrument has heavy-duty extruded aluminum frame, V-groove edge and powerful full-length magnetic edge. 4 vials (plumb, level, 45deg , vari-pitch) with 2 top-read windows. Lifetime limited warranty. U.S.A. Magnetic: Yes, Length (in.): 12, Accuracy: Within .0005, View: (2) Top read windows, Professional Series: No, Frame Material: Aluminum, Color: Blue

The laser level square projects horizontal and vertical laser chalklines on surfaces. Great for floors, tiles, paneling, wall fixtures, wallpapering, stenciling, wainscoting, finish carpentry, outlet switches, lighting fixtures, wall studs, partitions, and much more. Alignment guide for 90 layouts - calculate and turn angles in 5 increments. Retractable push-buttons to mount to wall surfaces - used with adhesive putty. Includes: Laser level, adhesive putty, and instruction manual.

The New Stanley S2 laser level square gives you a simple-to-use layout tool that projects horizontal and vertical laser chalklines on a variety of surfaces up to 30 feet. It mounts to those surfaces using a reusable adhesive. The S2 is a perfect tool for a variety of uses, including flooring, tile layout, paneling, wallpapering, stenciling, wainscoting, finish carpentry, outlet and switch layout, wall stud layout and partition installation. Additionally, this product is a perfect selection for the roofing or flooring installer as an accessory to your Stanley Bostitch Nailing Tool. This kit includes the level, adhesive strips, and a manual.

Welcome to the versatile world of SmartTool. Most levels only give you information at level (0 degrees) and plumb (90 degrees) using bubbles you have to work to center visually between two lines.  You can do that with SmartTool, too, but the SmartTool also lets you measure digitally, electronically, and with an actual number, at every angle, all 360 degrees of a complete circle.  So installing a deck, stair rail, extending a roof or determining how much an old floor has sagged is simpler, less time consuming, and more accurate.

SmartTool is simple to use. Just press the on/off button and SmartTool will show you the angle of any surface with decimal-point accuracy.  The display even flips over with the level so SmartTool always reads right side up And it shuts off automatically after 6 minutes when it's not being used, all this from a standard, 9-volt battery. And, SmartTool can take abuse other levels can't, because its components are made of high strength materials and you can reset it to factory accuracy with the touch of a button.

Many versatile options
If you can imagine times you'd like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need.  The SmartTool Module can be used as a stand alone level or it can be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches. M-D's top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed using only a screwdriver or coin, the versatility of this product can be appreciated in almost any application. The simple, SmartTool patented field calibration procedure can be performed using one button, any reasonably level surface, and just a couple of minutes. When used with the optional magnetic bracket, the SmartTool Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement.

Simple to use
SmartTool permits you to find level and plumb in two ways.  For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module.  It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don't.  So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be.  And only SmartTool allows you to measure angles three different ways: degrees, percent slope, and pitch (rise over run).

Read in Degrees
Set saw blade angles to a fraction of degree accuracy with SmartTool.  Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel.

Percent Slope and Pitch
In the percent slope mode the SmartTool allows you to read angles to meet requirements for sewer connections, ADA ramps, and grading. And showing compliance is merely a matter of pointing to the display. SmartTool also gives you roof pitch readings -- in inches of rise per foot of run -- right on the display. No two-handed measurements, no conversion calculations, and no mistakes.

Listen and Level Audio Feature
Have tasks where you really can't see the SmartTool but need instant feedback?  Then turn on the audio beeper.  When turned on with a single button, SmartTool lets you hear when your task is at level or plumb.  This can be great when shimming projects, leveling buildings, pool tables or other projects where you need immediate feedback but are not in a position to see the display. This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you want it.

Hold
The hold button makes it easy to measure in areas where the digital display is not visible.  Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading.

The Stabila Rare Earth Magnetic Torpedo Level is built with a heavy-duty, 10-inch die-cast metal frame and two acrylic vials (one horizontal, one vertical) that are crystal-clear, non-fogging, unbreakable, and monoblock for durability and ease of use; the design features 2 high-strength, flush-mounted rare earth magnets which are 10 times as strong as standard magnets for greater convenience and reading accuracy. This torpedo level fits into a tool pouch holster for easy carrying. This product has certified level accuracy to.029 degrees (1/32-inch over 72-inch) in top read position and is backed by a lifetime limited warranty; the vials will never fog, leak, or require adjustment, ensuring reliable, life-long use.

The Stabila Rare Earth Magnetic Torpedo Level is built with a heavy-duty, 10-inch die-cast metal frame and two acrylic vials (one horizontal, one vertical) that are crystal-clear, non-fogging, unbreakable, and monoblock for durability and ease of use; the design features 2 high-strength, flush-mounted rare earth magnets which are 10 times as strong as standard magnets for greater convenience and reading accuracy. This torpedo level fits into a tool pouch holster for easy carrying. This product has certified level accuracy to .029 degrees (1/32-inch over 72-inch) in top read position and is backed by a lifetime limited warranty; the vials will never fog, leak, or require adjustment, ensuring reliable, life-long use.

This self-leveling tool emits 5 independent bright laser dots set accurately at 90 to the other, allowing rapid set-up of interior partitioning, shelving, and other internal installation work. On/Off switch incorporating a compensator locking device to protect the unit from damage during transporation. Auto shutoff after 20 minutes to conserve battery life. When Out-of-Level the beams blink to alert the user. Heavy-duty magnetic damping compensator for rapid and stable leveling. Magnetic universal mount allows the unit to be fixed to standard or camera tripod, magnetically fixed to a metal surface or strapped to a pipe or scaffold. Trivet for working up to and over floor channels. Includes: Laser, multimount, plumb trivet, strap, target, carrying case, batteries, and instruction manual.

The Stanley SP5 5-beam self-leveling laser is the 21st Century's must-have productivity and accuracy enhancing, leveling, and alignment tool. The MP5 offers five independently self-leveled 650nm highly focused laser beams, providing accuracy of 1/4-inch at 100 feet. With this versatile device, you can plumb level and square instantly with no bubbles to level -- just turn it on and go to work. The SP5's unique self-leveling and dampening system is the quickest to settle the beam, and there are no beam offsets -- because they all come from the same axial plane. This reduces errors and set-up time all around. The flashing out-of-level sensor eliminates rechecks and costly mistakes, and the on/off switch locks the lasers in place when they're not in use.

This kit is ideal for a wide variety of construction professionals and do-it-yourselfers, including plumbers, electricians, carpenters, builders, remodelers, machinery installers, interior decorators, dyers, and more. The SP5 includes the universal mount with a magnetic base and mounting strap.

Stabila's new "best of the best" professional level in a promotional pack. For the price of the 48" level you recieve both the 48" and the 16" level. As the industry leader, Stabila has improved on the "world's best level" with the new type 196 series. The accuracy is certified, top and bottom readings and sports a new rubber hand grip design. Rubber pad end caps and wall grips that are functional yet removable for flush measuring.

Stabila's earned the right to boast, "Always Trust, Never Adjust." They're known for accuracy and dependability. Stabila guarantees that every one of their levels has been electronically calibrated and inspected and has received a certification of accuracy. The vial system, permanently epoxy-locked in the frame by a patented process, is the clearest and easiest to read of any level we've seen. Everything about these levels is quality, from the removable rubber end caps for flush measuring to the big, comfortable hand holds. But what matters most is accuracy, and these are dead-on every time. The vial fluid stays true even in wild temperatures, from -5°F to 165°F. It's German technology that's been in the works for more than a century, and it's paid off with the best for Stabila and its customers.--Kris Jensen-Van Heste

SmartTool Sensor Module digitally displays degrees, percent slope and pitch to 1/10" accuracy. Features audio sound at level and plumb. Module can be used alone or with Carpentry & Construction Levels.

Welcome to the versatile world of SmartTool. Most levels only give you information at level (0 degrees) and plumb (90 degrees) using bubbles you have to work to center visually between two lines.  You can do that with SmartTool, too, but the SmartTool also lets you measure digitally, electronically, and with an actual number, at every angle, all 360 degrees of a complete circle.  So installing a deck, stair rail, extending a roof or determining how much an old floor has sagged is simpler, less time consuming, and more accurate.

SmartTool is simple to use. Just press the on/off button and SmartTool will show you the angle of any surface with decimal-point accuracy.  The display even flips over with the level so SmartTool always reads right side up And it shuts off automatically after 6 minutes when it's not being used, all this from a standard, 9-volt battery. And, SmartTool can take abuse other levels can't, because its components are made of high strength materials and you can reset it to factory accuracy with the touch of a button.

Many versatile options
If you can imagine times you'd like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need.  The SmartTool Module can be used as a stand alone level or it can be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches. M-D's top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed using only a screwdriver or coin, the versatility of this product can be appreciated in almost any application. The simple, SmartTool patented field calibration procedure can be performed using one button, any reasonably level surface, and just a couple of minutes. When used with the optional magnetic bracket, the SmartTool Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement.

Simple to use
SmartTool permits you to find level and plumb in two ways.  For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module.  It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don't.  So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be.  And only SmartTool allows you to measure angles three different ways: degrees, percent slope, and pitch (rise over run).

Read in Degrees
Set saw blade angles to a fraction of degree accuracy with SmartTool.  Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel.

Percent Slope and Pitch
In the percent slope mode the SmartTool allows you to read angles to meet requirements for sewer connections, ADA ramps, and grading. And showing compliance is merely a matter of pointing to the display. SmartTool also gives you roof pitch readings -- in inches of rise per foot of run -- right on the display. No two-handed measurements, no conversion calculations, and no mistakes.

Listen and Level Audio Feature
Have tasks where you really can't see the SmartTool but need instant feedback?  Then turn on the audio beeper.  When turned on with a single button, SmartTool lets you hear when your task is at level or plumb.  This can be great when shimming projects, leveling buildings, pool tables or other projects where you need immediate feedback but are not in a position to see the display. This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you want it.

Hold
The hold button makes it easy to measure in areas where the digital display is not visible.  Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading.

M-D Building Products 92288 SmartTool Levels M-D Building Products 92288 SmartTool Levels Features:; SmartTool " digitally displays degrees, percent slope, and pitch to 1/10 º accuracy; Extremely durable, it will keep its accuracy for years with push button calibration; Features audio sound at level and plumb; Includes standard 9 volt battery; 92288: 24" sensor module in a 60CM rail; 92296: 48" sensor module in a 120CM rail

Welcome to the versatile world of SmartTool. Most levels only give you information at level (0 degrees) and plumb (90 degrees) using bubbles you have to work to center visually between two lines.  You can do that with SmartTool, too, but the SmartTool also lets you measure digitally, electronically, and with an actual number, at every angle, all 360 degrees of a complete circle.  So installing a deck, stair rail, extending a roof or determining how much an old floor has sagged is simpler, less time consuming, and more accurate.

SmartTool is simple to use. Just press the on/off button and SmartTool will show you the angle of any surface with decimal-point accuracy.  The display even flips over with the level so SmartTool always reads right side up And it shuts off automatically after 6 minutes when it's not being used, all this from a standard, 9-volt battery. And, SmartTool can take abuse other levels can't, because its components are made of high strength materials and you can reset it to factory accuracy with the touch of a button.

Many versatile options
If you can imagine times you'd like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need.  The SmartTool Module can be used as a stand alone level or it can be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches. M-D's top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed using only a screwdriver or coin, the versatility of this product can be appreciated in almost any application. The simple, SmartTool patented field calibration procedure can be performed using one button, any reasonably level surface, and just a couple of minutes. When used with the optional magnetic bracket, the SmartTool Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement.

Simple to use
SmartTool permits you to find level and plumb in two ways.  For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module.  It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don't.  So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be.  And only SmartTool allows you to measure angles three different ways: degrees, percent slope, and pitch (rise over run).

Read in Degrees
Set saw blade angles to a fraction of degree accuracy with SmartTool.  Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel.

Percent Slope and Pitch
In the percent slope mode the SmartTool allows you to read angles to meet requirements for sewer connections, ADA ramps, and grading. And showing compliance is merely a matter of pointing to the display. SmartTool also gives you roof pitch readings -- in inches of rise per foot of run -- right on the display. No two-handed measurements, no conversion calculations, and no mistakes.

Listen and Level Audio Feature
Have tasks where you really can't see the SmartTool but need instant feedback?  Then turn on the audio beeper.  When turned on with a single button, SmartTool lets you hear when your task is at level or plumb.  This can be great when shimming projects, leveling buildings, pool tables or other projects where you need immediate feedback but are not in a position to see the display. This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you want it.

Hold
The hold button makes it easy to measure in areas where the digital display is not visible.  Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading.

It's tempting to try it, but door jambs aren't always rigid enough top to bottom for plumbing with a standard short level. And, longer levels are too long for leveling sills. Here's an affordable way to get both levels with one easy purchase. Great for installing doors, headers, sills and thresholds, this level set includes Stabila's 196 series 78-inch level is ideal for installing door frames, and a 32-inch level for installing headers, sills, and thresholds. Both levels feature a wide-profile design for optimal jobsite durability. With certified accuracy, the levels have both top and bottom readings and sport a new oversized, rubber hand grip design. Rubber pad end caps and wall grips are functional yet removable for flush leveling. Light and strong, these levels are easy to wield yet plenty durable. Clear vials with spring steel hairline indicators mean easy reading. The purchase is covered by a Stabila lifetime warranty.

It's tempting to try it, but door jambs aren't always rigid enough top to bottom for plumbing with a standard short level. And, longer levels are too long for leveling sills. Here's an affordable way to get both levels with one easy purchase. Great for installing doors, headers, sills and thresholds, this level set includes Stabila's 196 series 78-inch level is ideal for installing door frames, and a 32-inch level for installing headers, sills, and thresholds. Both levels feature a wide-profile design for optimal jobsite durability. With certified accuracy, the levels have both top and bottom readings and sport a new oversized, rubber hand grip design. Rubber pad end caps and wall grips are functional yet removable for flush leveling. Light and strong, these levels are easy to wield yet plenty durable. Clear vials with spring steel hairline indicators mean easy reading. The purchase is covered by a Stabila lifetime warranty. --Brian D. Olson

2 BUBBLE VIAL WITH BACKLIGHT FOR INCREASED VISIBILITY360 ROTATING WALL ATTACHMENT PROJECTS LASER AT ANY LEVELINCLUDES 2 AA BATTERIESUPC : 028877524368Shipping Dimensions : 7.25in X 7.00in X 2.50inEstimated Shipping Weight : 0.7643

Ideal for hanging pictures along a stairwell, hanging mirrors, installing curtain rods, and other domestic items, the Black & Decker BDL220S Laser Level projects vertical and horizontal laser lines for accurate placement of objects. Its 360-degree rotating wall attachment projects a laser line at any angle and two extra large backlit bubble vials are provided for maximum accuracy and visibility. Categorized as a class II laser, this laser level comes backed by a 2-year limited warranty.

STABILA's general purpose level. Accurate, lightweight and fast. Designed for the tile installers and everyday use. Easy cleaning, absolutely waterproof. Always accurate, work with confidence and speed. Big, clear, easy to read top mounted horizontal vial. Rugged, takes rough handling. Certified accuracy in top read position: 1/32" over 72". BENT LEVELS VOID WARRANTY

M-D Building Products 92379 24" SmartTool Electronic Level M-D Building Products 92379 24" SmartTool Electronic Level Features:; Digitally displays degrees, percent slope and pitch to 1/10 degree accuracy; Extremely durable, it will keep its accuracy for years with push button calibration; Features audio sound at level and plumb; Includes standard 9 volt battery; 24" length

Welcome to the versatile world of SmartTool. Most levels only give you information at level (0 degrees) and plumb (90 degrees) using bubbles you have to work to center visually between two lines.  You can do that with SmartTool, too, but the SmartTool also lets you measure digitally, electronically, and with an actual number, at every angle, all 360 degrees of a complete circle.  So installing a deck, stair rail, extending a roof or determining how much an old floor has sagged is simpler, less time consuming, and more accurate.

SmartTool is simple to use. Just press the on/off button and SmartTool will show you the angle of any surface with decimal-point accuracy.  The display even flips over with the level so SmartTool always reads right side up And it shuts off automatically after 6 minutes when it's not being used, all this from a standard, 9-volt battery. And, SmartTool can take abuse other levels can't, because its components are made of high strength materials and you can reset it to factory accuracy with the touch of a button.

Many versatile options
If you can imagine times you'd like to have both a small digital torpedo level and a longer level, the SmartTool Module fills the need.  The SmartTool Module can be used as a stand alone level or it can be placed in the optional American I-beam level in lengths of 24 inches, 48 inches or 96 inches.  M-D's top-quality red aluminum I-beam levels have been assured of excellence among construction professionals for more than three-quarters of a century. Easily attached or removed using only a screwdriver or coin, the versatility of this product can be appreciated in almost any application.  The simple, SmartTool patented field calibration procedure can be performed using one button, any reasonably level surface, and just a couple of minutes. When used with the optional magnetic bracket, the SmartTool Module will stay on saw blades, metal pipes, buildings, machinery or anything made of iron or steel allowing hands free measurement.

Simple to use
SmartTool permits you to find level and plumb in two ways.  For quick references, use the sensitive bubble vials. For highly precise work, use the digital display on the Sensor Module.  It provides accuracy to 1/10 of a degree. But the real advantage of the SmartTool is that it also reads all the other angles bubble vials don't.  So when you are not dealing with level or plumb, SmartTool quickly tells what the angle is and what the angle needs to be.  And only SmartTool allows you to measure angles three different ways:  degrees, percent slope, and pitch (rise over run).

Read in Degrees
Set saw blade angles to a fraction of degree accuracy with SmartTool.  Assure there is no gap when you join 2 cuts together with .1 degree accuracy. You can easily duplicate a stair angle for setting handrails and never again will you be measuring top and bottom to make sure stair treads and rails are parallel. 

Percent Slope and Pitch
In the percent slope mode the SmartTool allows you to read angles to meet requirements for sewer connections, ADA ramps, and grading.  And showing compliance is merely a matter of pointing to the display. SmartTool also gives you roof pitch readings -- in inches of rise per foot of run -- right on the display.  No two-handed measurements, no conversion calculations, and no mistakes.

Listen and Level Audio Feature
Have tasks where you really can't see the SmartTool but need instant feedback?  Then turn on the audio beeper.  When turned on with a single button, SmartTool lets you hear when your task is at level or plumb.  This can be great when shimming projects, leveling buildings, pool tables or other projects where you need immediate feedback but are not in a position to see the display.  This can leave your hands free to adjust, nail, or screw the project in place when you hear the beep telling you it is where you want it.

Hold
The hold button makes it easy to measure in areas where the digital display is not visible.  Take the measurement, push the hold button, and then bring the SmartTool in front of you to see your reading.

WATER LEVEL - This amazingly simple device attaches to any garden hose to accurately determine levels for driveways. lawns, fences, sills, ceilings, footings and gradings. Best of all there are no parts to break down or wear out.

No. 196. Ideal for framing, trim carpentry, and tile applications. Unique BOX BEAM frame does not bend or warp. 1 horizontal vial and 2 vertical vials. Crystal clear vials readable in any direction with no change in accuracy tolerance, guaranteed for life, vial accuracy of .029 in the vial-up or vial-down position. Best frame strength-to-weight ratio. Removable endcaps for scribing in corners and for reading tight header and sill openings. Rubber endcaps grip walls and do not leave marks. Metal hang hole for storing level on site. Large comfortable rubber hand holes. Fast and accurate installations. Each Stabila level is electronically adjusted. Machine milled faces assure measuring accuracy. Unbreakable acrylic vials won't break, leak, or fog for life. Top and side reading in both vial-up and vial-down positions for best accuracy. Sure-grip antislip wall pads. Slip-resistant. Yellow electrostatic epoxy coating for high-visibility and resistance to mortar adherence and corrosion. Patented epoxy system, locks vials into the frame for no loss of accuracy and never readjusting. No. 37424: 24" No. 37432: 32" No. 37448: 48" No. 37524: 59" No. 37496: 96"

The Stabila Non-Magnetic Builder's Level is a professional-grade tool ideal for framing, trim carpentry, and tile applications. Designed with a wider profile for added strength in the box beam frame, this builder's level also features oversized rubber hand holds for comfortable use and a metal hang hole for storing the level on site. The level includes rubber end-caps and anti-slip wall pads that grip the walls for added level stability; the end-caps can also be removed for flush measuring when scribing corners or reading tight header and sill openings. The 3 acrylic vials (1 horizontal and 2 vertical) are guaranteed to never break, leak, or fog; with a permanently calibrated, epoxy-locked, crystal-clear design and internal spring steel hairline indicators, these vials are readable in any direction and have a certified level accuracy of.029 degrees in both vial-up and vial-down readings. The yellow electrostatic epoxy coating provides high-visibility and resistance to mortar adherence and corrosion. This level measures 24 inches in length and is backed by a lifetime limited warranty.

The Stabila Non-Magnetic Builder's Level is a professional-grade tool ideal for framing, trim carpentry, and tile applications. Designed with a wider profile for added strength in the box beam frame, this builder's level also features oversized rubber hand holds for comfortable use and a metal hang hole for storing the level on site. The level includes rubber end-caps and anti-slip wall pads that grip the walls for added level stability; the end-caps can also be removed for flush measuring when scribing corners or reading tight header and sill openings. The 3 acrylic vials (1 horizontal and 2 vertical) are guaranteed to never break, leak, or fog; with a permanently calibrated, epoxy-locked, crystal-clear design and internal spring steel hairline indicators, these vials are readable in any direction and have a certified level accuracy of .029 degrees in both vial-up and vial-down readings. The yellow electrostatic epoxy coating provides high-visibility and resistance to mortar adherence and corrosion. This level measures 24 inches in length and is backed by a lifetime limited warranty.

Set includes: 78'' level and 32'' level, ideal for door jambs. Certified level accuracy in top read position: 1/32'' over 72''. Removable rubber end caps for flush measuring in corners. Level accuracy guaranteed for life; vials will never fog, leak, or require adjustment.

The Stabila Magnetic Jamber Level Set gives you a 78-inch level and a 32-inch level, providing you with a versatile and professional-grade tool combo ideal for setting door frames, headers, sills and thresholds. These levels include flush-mounted, rare earth magnets 10 times stronger than standard magnets which allow you to work hands-free as the level powerfully clings to metal studs, beams and pipes. These levels feature a wider profile for added strength in the box beam frame, and the 78-inch level includes a bridge over the horizontal vial for uninterrupted scribing and increased frame strength. These levels include rubber end-caps and anti-slip wall pads that grip surfaces for added level stability; the end-caps can also be removed for flush measuring when scribing corners or reading tight header and sill openings. With a permanently calibrated, epoxy-locked, crystal-clear design and internal spring steel hairline indicators, these acrylic vials are readable in any direction and have a certified level accuracy of .029 degrees (1/32-inch over 72-inch) in top read position. The longer level comes with 3 vials (1 horizontal and 2 vertical) and the shorter level has 2 vials (1 horizontal and 1 vertical), all of which are guaranteed to never break, leak, or fog. This set is backed by a lifetime limited warranty.

Includes LM30 Wizard Horizontal/Vertical Dual Beam Rotary Laser Package - 57-LM30PKG, Detector - LD100N, Tripod, Rod, Wiz-Mount, Target, Safety Glasses, (3) C Cell Batteries, Carrying Case, Instruction Manual

The LaserMark LM30 Manual Leveling Laser from CST/Berger has proven to be one of the most trusted tools in the market. This device is a one-person, one-button leveling, plumbing and alignment tool designed for the entry-level user who demands quality and accuracy. It comes packed with features such as two rotation speeds (150 and 600 rpm), spot mode, long and short sweep modes, and an LED low battery indicator.

The LM30 provides all the necessary extras for a wide range of leveling applications. Its protected level vials prevent damage and shield vials from the sun to prevent misreads, and it has a built-in trivet for vertical applications, plus a dual beam rotary head with "Point and Shoot" sweep. It boasts an accuracy of 1/4 inch at 100 feet, and a working range of up to 800 feet in diameter with the LD100N laser detector (included). This is the perfect choice for the small contractor, homeowner or farmer.