|
Johnson Level & Tool and Tool 700 Magnetic Angle Locator
By: Johnson Level & Tool
Our price:
$11.90
List price:
$16.39
You save
$4.49
(
27%)
- Angle locator designed for durability and easy use
- Strong, magnetic contact for accurate angle identification
- High-impact plastic body
- Permanent ceramic magnet; metric and English rule
- 1-year limited warranty
|
Product Description
Magnetic Angle Locator, High Impact Body In Hi Visibility Orange, Clear Acrylic Lens With Easy To Read Increments In 0-90 Degrees In 4 Quadrants, V-Grooved Edge To Accommodate Pipe & Conduit, Extra Strong, Permanent Ceramic Magnet, Convenient Metric Rule On 1 Edge & English Rule On The Other.
Product Description
The Johnson Level & Tool Magnetic Angle Locator is designed for plumbing, electrical, or HVAC work that demands strong, magnetic contact with pipe, conduit, or other ferrous surfaces for accurate angle identification. It is built for durability and easy use, with a high-impact, plastic body in high-visibility orange and a clear, acrylic lens with easy-to-read increments in 0 to 90 degrees in 4 quadrants. Its V-grooved edge accommodates pipe and conduit, and it features an extra-strong, permanent ceramic magnet. The angle locator includes convenient metric rule on one edge and English rule on the other. It is covered by a 1-year limited warranty.
|
|
|
Plastic 12" Goniometer 360 Degree ISOM - 12"
By: CMS
Our price:
- Clear plastic permits observation of joint's axis of motion and its range of motion
- 360 degree head has 3 scales calibrated to be used with the ISOM (International Standards of Measurement, STFR) system
- One arm has a linear scale in inches and centimeters
- Scale reads 1 degree increments
- 360 Degree ISOM 12" goniometer - plastic
|
Product Description
One Plastic 12" Goniometer 360 Degree ISOM - 12" Best Value
Listing is for one goniometer. Other sizes available at comparable savings. Visit our store for combined shipping and greater savings.
|
|
|
Quint iGaging 11" Digital Protractor With 8" Rule
By: QUINT GRAPHICS
Our price:
List price:
$19.90
You save
(
%)
- Large LCD display
- Graduated Stainless Steel Arms for measuring
- Measuring Range: 0-360 degrees
- Accuracy: +/- 0.2"
- Convenient Hold Function
|
Product Description
This digital protractor/rule allows you to precisely set and measure angles in 0.05 degree increments. The stainless steel arms are graduated in 1/8", 1/16", 1/32" and 1/64" for convenient and immediate linear measuring. Features a hold function, ensuring you never lose your reading, and a reverse reading capability for those hard to calculate angles. The protractor measures angles from 0 to a full 360 degrees. Packaged in a protective plastic pouch with an extra battery.
NOTE: FREE SHIPPING ONLY IN THE UNITED STATES.
|
|
|
Starrett 505P-7 Miter Saw Protractor
By: Starrett
Our price:
$20.40
List price:
$34.99
You save
$14.59
(
42%)
- Laser engraved dial for accuracy
- Constructed from durable engineered plastic
- Teflon "O" ring insures smooth and precise operation
- Direct read from the work to your miter saw with two easy to read scales
- Made in the USA
|
Product Description
Legendary Starrett accuracy takes error prone calculations out of the process of setting up miter cuts. Simply set your saw to the angle that you read on the protractor.
|
|
|
Wixey WR410 8-Inch Digital Protractor
By: Wixey
Our price:
$45.95
List price:
$58.99
You save
$13.04
(
22%)
- Measures angles in any plane
- 0.1 degree resolution, accuracy, and repeatability
- Sets both miter and bevel angles
- Great for measuring and layout
- Strong magnets on all blade edges for ease of use
|
Product Description
Use this Wixey digital protractor electronic angle gauge to get quick, accurate measurements of existing angles like mitered trim work, crown molding, roof slopes, and wall corners. This tool is particularly handy when measuring the true angle of inside and outside wall corners for tight fitting crown or base molding and chair rail miter joints. Large easy to read display reads angles from 0 to 180 degrees, and can be zeroed at any point in the swing of the protractors leg. Whether you are measuring an odd, hard to reach angle or setting up your table saw blade, just read the angle measurement directly from the digital protractor. Each 9" long x 2" wide aluminum leg has built in magnets to help hold the protractor to metal surfaces.
|
|
|
General Tools 822 5-inch Digital Angle Finder Rule
By: General Tools
Our price:
$21.22
List price:
$29.99
You save
$8.77
(
29%)
- Digital stainless steel angle rules make precise measurements for easy woodworking
- Lock and reverse angle features for all types of work
- Hinge mechanism allows a full 360-degrees to measure inside outside and reverse angles
- Can be zeroed at any point in the swing
- Large easy to read LCD display
|
|
|
|
|
Incra PROTRAC06 6-Inch Precision Marking Protractor
By: Incra
Our price:
$24.75
List price:
$32.95
You save
$8.20
(
25%)
- Protractor lets you plot any angle with ease and absolute accuracy
- T-Bar and see-through crosshairs provide perfect alignment
- 6-inch centering scale with micro-fine marking holes at every 1/32 inches
- Four angle scales, including one for marking narrow stock
- Micro-fine guide holes at every 45-, 30-, 22.5-, 5-, 1-, and 0.5-degree intervals
|
Product Description
The Incra 6-Inch Precision Marking Protractor lets you plot any angle with ease and absolute accuracy. A metal T-Bar and see-through cross hairs provide perfect alignment against the edge of your work-piece. Remove the T-Bar to work on flat surfaces or to use the 6-inch centering scale with micro-fine marking holes at every 1/32 inches. This marking protractor has micro-fine guide holes at every 45-, 30-, 22.5-, 5-, 1-, and 0.5-degree intervals. Four angle scales, including one for marking narrow stock, suit every need. It's easy on the eyes, incredibly accurate, and just plain fun to use.
Product Description
The Incra 6-Inch Precision Marking Protractor lets you plot any angle with ease and absolute accuracy. A metal T-Bar and see-through cross hairs provide perfect alignment against the edge of your work-piece. Remove the T-Bar to work on flat surfaces or to use the 6-inch centering scale with micro-fine marking holes at every 1/32 inches. This marking protractor has micro-fine guide holes at every 45-, 30-, 22.5-, 5-, 1-, and 0.5-degree intervals. Four angle scales, including one for marking narrow stock, suit every need. Its easy on the eyes, incredibly accurate, and just plain fun to use.
|
|
|
iGaging 14" Digital Protractor With 12" Rule
By: QUINT GRAPHICS
Our price:
List price:
$23.90
You save
(
%)
- Large LCD display
- Graduated Stainless Steel Arms for measuring
- Measuring Range: 0-360 degrees
- Accuracy: +/- 0.2"
- Convenient Hold Function
|
Product Description
This digital protractor/rule allows you to precisely set and measure angles in 0.05 degree increments. The stainless steel arms are graduated in 1/8", 1/16", 1/32" and 1/64" for convenient and immediate linear measuring. Features a hold function, ensuring you never lose your reading, and a reverse reading capability for those hard to calculate angles. The protractor measures angles from 0 to a full 360 degrees. Packaged in a protective plastic pouch with an extra battery.
|
|
|
Fiskars Plastic Swing Arm Protractor Set of 1
By: Fiskars
Our price:
$4.33
List price:
$1.79
You save
(
%)
- Ideal for kids ages eight and up
- Easy-to-read inch and centimeter marks makes measuring easy
- Swing arm provides straight-edge guide for drawing angles
- Constructed of shatter-resistant plastic for lasting durability
- Lifetime warranty
|
Product Description
Fiskars 12-95400B Assorted Colors Swing Arm Protractor Our Swing Arm Protractor includes easy-to-read inch and centimeter marks for measuring arcs, and a convenient swing arm provides a straight edge that ensures precise measurement and makes drawing perfect angles a breeze. Made from heavy-duty plastic to resist bending and shattering. Fiskars 12-95400B Assorted Colors Swing Arm Protractor Features: Swing arm protractor A must have tool for every student Easy to read inches and centimeters Swing arm for capturing angles Assorted colors in Clear and Blue, Red or Black
|
|
|
Plastic Angle Rule Goniometer 7" 360 Degrees
By: Goniometers
Our price:
List price:
$6.36
You save
(
%)
- Features broad arms
- Reads 0o to 180o in each direction in 5o increments
- Linear readings in inches and centimeters
|
Product Description
Inexpensive clear plastic goniometers have 5-inch linear scale calibrated in inches and centimeters. Goniometer fits in shirt pocket. 360° rulongmeter.
|
|
|
Plastic 6-3/4" Goniometer 180 Degrees
By: Goniometers
Our price:
- Scale reads Oo to 180o degrees in 5o degree increments
- Linear readings in inches and centimeters
|
Product Description
Scale reads Oo to 180o degrees in 5o degree increments * Linear readings in inches and centimeters *
|
|
|
Starrett 505A-7 ProSite Protractor
By: Starrett
Our price:
$42.99
List price:
$52.00
You save
$9.01
(
17%)
- 7-Inch miter saw protractor with two scales-red -Inchmiter cut-Inch scale and black -Inchsingle cut-Inch scale
- Allows direct transfer of the work angle to the miter saw in 3 steps with no calculations
- Features durable 1/4-Inch thick aluminum alloy and reflon O-ring for smooth, precise operation
- 12-Inch version also available to cover
- 7-Inch long; 1-1/2-Pound; 1-year warranty
- Ideal for carpenters, plumbers and all building trades
- Saves time and reduces waste
- Scale shows angle for a miter joint and single cut
- Takes error-prone calculations out of miter cuts
- Upside down or backwards, the reading is always correct
|
Product Description
Takes error-prone calculations out of the process of miter cuts to ensure perfect miter joints every time! Simply set your miter saw to the angle that you read. Upside down or backwards, the reading is always correct. Features two scales: red scale and arrow show the angle for a miter joint, while the black arrow and scale provide the angle to fit a single workpiece to an angle. Durable aluminum with Teflon O-ring for smooth and positive operation. Patented.
|
|
|
General Tools 17 Square Head Protractor
By: General Tools
Our price:
$12.23
List price:
$14.36
You save
$2.13
(
15%)
- Ground stainless steel
- 6" adjustable protractor arm
- Permanently etched graduations for 0 to 180 degrees in opposite directions
- It has a 3-3/8" x 2" head
|
Product Description
Made of ground stainless steel. Permanently etched graduations from 0 to 180 in opposite directions. 3 3 8" x 2" head. 6" adjustable protractor arm locks onto desired position with knurled thumb nut.
|
|
|
QUINT 7" True Angle UNBREAKABLE Plastic 360 Degree Goniometer w/1 Degree Increments + Locking Device
By: QUINT MEASURING SYSTEMS
Our price:
- 360 degree adjustable goniometer; 7" tool will fit in shirt pocket
- Defines, measures, makes, locks and transfers any angle in under 5 seconds
- Precision tool - made to 5/1000ths of an inch in accuracy
- Linear readings in both inches and centimeters
- LIFETIME WARRANTY - WILL NOT CRACK OR BREAK!
|
Product Description
The Original True Angle goniometer is the world's fastest and easiest angle making tool available. Just rotate the blades and read the dial. The hairline locates the exact angle within a tolerance of 5/1000ths of an inch. The blades rotate 360 degrees in both directions. To lock the blades, lightly tighten the finger nut. To unlock the blades, rotate the top blade counterclockwise. The True Angle goniometer has a lifetime warranty - it is guaranteed not to crack or break. Note: for a greater degree of reading accuracy, the True Angle 4" UNBREAKABLE Goniometer Accessory Dial is available, No. PGD104, ASIN: B0053DGGDE.
|
|
|
Alvin & Co. 312 ROLLING RULER - 12"
By: Alvin & Co.
Our price:
List price:
$9.95
You save
(
%)
- An easy-to-use ruler that is in inches reading to 16ths
- Works as a T-square triangle
- Transparent straightedge and protractor in one
- Will not turn under pressure
- Features durable clear acrylic with die-sunk graduations
|
Product Description
0
|
|
|
General Tools 18 Round Head Protractor
By: General Tools
Our price:
$12.45
List price:
$15.44
You save
$2.99
(
19%)
- Ground stainless steel
- 3-3/8-Inch by 2-Inch head-Round
- permanently etched graduations for 0 to 180 degrees in opposite directions
- 6-Inch adjustable protractor arm
|
Product Description
Adjustable protractor arm locks into desired position with knurled thumb nut. Permanently etched graduations from 0 to 180 in opposite directions.
|
|
|
MLCS 9319 0 to 180 Degree Digital Angle Ruler/Protractor
By: MLCS
Our price:
$29.24
List price:
$39.95
You save
$10.71
(
27%)
- Ideal for installing crown molding, chair rails, or base molding
- Allows user to cut inside or outside corner angles
- Digital screen displays angle measurements from 0 degrees to 180 degrees
- Set the miter or bevel angle on virtually any tool
- CR2032 3-volt lithium battery is included
|
Product Description
No more guessing the inside or outside corner angles on walls when installing crown, chair rail or base moldings. This gauge will allow you to cut mitered joints correctly the first time. Use to set the miter or bevel angle on virtually any tool. The digital screen displays angle measurements from 0º - 180º accurately to within 0.3º. A convenient hold bottom locks the reading on the display. The 8-1/2-Inch long blades have ruler markings (7-Inch/200mm) on each blade and can be locked in position to transfer angle measurements. A CR2032 3V Lithium battery is included.Inside or outside corner anglesDigital screen displays angle measurements from 0-Degree to 180-DegreesSet the miter or bevel angle on virtually any toolGreat for installing crown, chair rail or base moldingsPrecise
|
|
|
Starrett 505A-12 ProSite 12-Inch Dial Protractor
By: Starrett
Our price:
$55.50
List price:
$63.00
You save
$7.50
(
12%)
- 12-inch miter saw protractor with two scales--red "miter cut" scale and black "single cut" scale
- Allows direct transfer of the work angle to the miter saw in 3 steps with no calculations
- Durable 1/4-inch thick aluminum alloy; Teflon O-ring for smooth, precise operation
- 7-inch version also
- 12-inches long; 1-1/2 pounds; 1-year warranty
- Ideal for carpenters, plumbers and all building trades
- Saves time and reduces waste
- Scale shows angle for a miter joint and single cut
- Takes error-prone calculations out of miter cuts
- Upside down or backwards, the reading is always correct
|
Product Description
No miter saw is complete without this patented and multiple award winning invention. This is the original and very popular 12-inch model of the Starrett ProSite Miter Saw Protractor. It is now also available in the conveniently smaller-sized 7-inch model, the 505A-7. The Starrett ProSite Miter Saw Protractor takes error-prone calculations out of the process of miter cuts and other angle cuts. Simply set your saw to the angle that you read on the tool. There are absolutely no calculations. Upside down or backwards, the reading is always correct. These easy-to-use tools have two scales. The red scale and red "Miter Cut" arrow provide the exact miter saw setting for a perfect miter joint, while the black scale and black "Single Cut" arrow provide the exact miter saw setting for fitting a single workpiece to any angle. The ProSite Miter Saw Protractors save time and reduce waste. They are ideal for carpenters, plumbers, and all building trades which require the measuring and transferring of angles. They are also invaluable for home use and do-it-yourselfers. They are the perfect and essential companion for every miter saw user. Buy both models and cover all your angles!
Product Description
Starrett's award-winning ProSite 505A-12 12-Inch Miter Saw Protractor is ideal for anyone who regularly measures and transfers angles, from professional plumbers and carpenters to weekend craftspeople. This protractor eliminates the need for tricky, error-prone calculations. You simply read the angle on the protractor and set your saw to that angle to achieve perfect miter cuts and other angled cuts.  |
An easy-to-read dial makes the ProSite® protractor simple to work with. View larger. |
Simply read the angle on the protractor and transfer to your saw for perfect miter cuts. View larger. |
Easy to Use for Error-Free MeasurementsMeasuring accurate angles and making accurate cuts saves you time, reduces the amount of material that you waste, and helps you get jobs done quickly and efficiently. That's where precision tools like the ProSite Miter Saw Protractor come in. Featuring a patented, easy-to-use design, this tool offers two scales for quick reference. The scales have been laser engraved for exceptional accuracy with each measurement. The miter cut arrow shows the required angle for crafting a precise miter joint, while the single cut arrow provides you with the angle needed to fit a single work piece to an existing angle. The protractor gives you correct measurements every time, even when you're viewing your work piece backwards or upside down. As durable as it is convenient, this protractor features machined aluminum legs and an adjustable friction pivot. Starrett also makes the smaller 505A-7, a convenient seven-inch protractor featuring the same easy-to-read dial and dependable construction, and the CP505A-12, a combination protractor that features a conversion table for use with compound miter saws plus a reference guide for working with common roof pitches. About the L.S. Starrett Company: 115 Years of Experience
Tracing its roots back to the invention of the combination square by Laroy S. Starrett in 1877, the L.S. Starrett Company has a long history of creating innovative, high-quality tools. Used by everyone from tradesmen and small machine shops to Fortune 500 firms, their wide range of current products includes precision tools like micrometers and calipers alongside technologically advanced tools like optical measuring projectors and electronic gauges. Starrett is also a leading producer of saw blades. What's in the Box
505A-12 ProSite 12-Inch Dial Protractor.
Product Description
Durable 1/4" aluminum with Teflon O-ring for smooth, precise operation, 12" model available with identical dial and functionality, Optional leather holster available for 12" models.
|
|
|
Baseline SS 3.5" Finger Goniometer
By: Fabrication Enterprises
Our price:
List price:
$35.00
You save
(
%)
- Model # 12-1015 - Stainless Steel 3 1/2" - each
- Stainless steel goniometer measures range-of-motion of finger joints (metacarpophalangeal and interphalangeal
- Small joints including toes
- Head has two opposing 180 scales marked in 5 increments. -
- Linearscale in inches and centimeters is on the arm
|
Product Description
Stainless steel goniometer measures range-of-motion of finger joints (metacarpophalangeal and interphalangeal) and other small joints including toes. Head has two opposing 180° scales marked in 5° increments. A linear scale in inches and centimeters is on the arm. Deluxe model has larger head for more accurate reading.
|
|
|
General Tools 1702 6-Inch Stainless Steel Pivoting Arm Digital Protractor
By: General Tools
Our price:
$21.14
List price:
$39.99
You save
$18.85
(
47%)
- Large, easy-to-read display
- 6-inch (150mm) Stainless Steel Protractor Arm with Knurled Locking Nut
- Display can be inverted for easy reading
- Hold function to freeze measurement
- Thumb Screw will lock arm in any position
|
Product Description
General 1702 Pro-Angle 6" Stainless Steel Digital Protractor
|
|
Complete List of Tools
Complete List of
Outdoor Products
|
Canada
UK
Germany
