|
Kreg KHC-RAC Right Angle Clamp
By: Kreg
Our price:
$24.65
List price:
$27.99
You save
$3.34
(
12%)
- Align workpieces in 90-degree registration
- Anchors the workpiece firmly in place
- Swiveling pad automatically adjusts to your material dimensions
- Great for assembling all types of box joints
- 90-degree clamping made easy
|
Product Description
This clamp makes pocket-hole joints as easy to clamp as they are to make. One side of the adjustable locking plier clamp is formed into a pin that mates perfectly into a 3/8" pocket hole, and the other side has a swivel pad that allows the clamp to align perfectly with the mating surface. Comfort grips eliminate pinching when releasing the clamp. Once you try the RAC you will wonder how youve been doing pocket-hole joints without it! Also great for assembling all types of box joints.
|
|
|
E. Emerson Tool Co. C50 50-Inch All-In-One Contractor Straight Edge Clamping Tool Guide
By: E. Emerson Tool Co
Our price:
$29.54
List price:
$46.00
You save
$16.46
(
36%)
- No more C-clamping with a self-clamping straight edge to guide your power tools for truly straight cuts
- Extra wide rail for exceptional rigidity and low profile for obstruction free cuts
- Make joiner cuts on your table saw. The length of clamping area is "50.25 inches" between the jaws.
- Nylon jaws hold work piece securely and are predrilled for accessory Wide Jaws and Tall Jaws
- Recessed tracks accept Contractor series Saw Plate, Router Plate and Stop Block but will not work with A, Twin or Ultra series accessories
|
Product Description
E. EMERSON TOOL ALL-IN-ONE CONTRACTOR CLAMPING TOOL GUIDE *50" *C-series *All-in-one straight edge and clamping tool guide *Self locking straight edge used as a guide for circular saws and routers *Works equally well as a fence for a drill press or band saw *Also a handy clamp for general purposes such as gluing *Aluminum guide is ridged yet light *When used for glue-ups, it has more than 600 psi of clamping force *Lifetime warranty *Accessories: Router plate - no. 2301927 Saw plate - no. 2301943 Wide Jaw - no. 2301901
|
|
|
PanaVise Model 201 "Junior" Miniature Vise
By: Panavise
Our price:
$24.99
List price:
$27.99
You save
$3.00
(
11%)
- Easy-to-use single knob controls head movement through 3-planes: 210 degree Tilt, 360 Turn & 360 Rotation
- Fine/coarse adjusting knob controls jaw pressure for delicate work
- Grooved jaws are excellent for holding small objects and are made of reinforced thermal composite plastic
- Continuous heat tolerance to 350 F (177 C), intermittent heat up to 450 F (204 C)
- Limited Lifetime Warranty!
|
Product Description
The PanaVise 201 "Junior" miniature vise is a combination of quality workmanship and durability, ease of adjustment and available accessories. Designed for use in small projects requiring precise soldering, gluing and tool work, the 201 Junior miniature vise features tilt adjustability up to 210-degrees along with 360-degree turns and rotations, fine and course clamping abilities, grooved jaws for easy holding power, heat-tolerant jaws, compatibility with other vise components and more.  Split-ball joint allows the vise head to move across 3-planes.
View larger. Turn, Tilt and Rotate Clamped Items at Will The PanaVise Model 201 Junior miniature vise is a versatile, multi-use mini-vise that is suitable for use in everything from arts and crafts, to model making, electronics and other small projects. Lightweight, yet durable, the vise is designed around a vise head assembly constructed of a black glass reinforced thermal composite alloy connected to a die cast zinc base by PanaVise's patented ball joint clamp system, known as a "split-ball." The split-ball system not only holds items within the vise head assembly securely in position, but also allows for maneuvering of them along three separate planes. The complete range of mobility possible with the split-ball joint clamp system is a 210-degree tilt to the left or right, along with either an angled rotation or level turn range of 360 degrees. This range of mobility, especially the large left-to-right tilt, allows you to rearrange items being worked on into virtually any position, limiting the need to adjust the overall position of the vise or the item within the vise.  Well-suited to small precision jobs like arts and crafts, and model making.
View larger.  Grooved jaws and heat tolerance make it good for electronics as well.
View larger. The head assembly of the PanaVise 201 Junior miniature vise contains a number of convenient additional features users will find valuable. The first of these revolves around is its ability to securely and safely hold items. Although the 1" wide by 2" tall, the jaws of the 201 Junior miniature vise are able to secure both tough small jobs as well as delicate jobs by way of their dual adjustment mechanism that allows for both course and fine adjustments. In addition, the holding power of the jaws can be softened further with an optional padded accessory for holding extremely delicate items (sold separately). Next, the upper ends of both jaws contain grooved ridges. These ridges are designed for detailed work with flat, angled items like circuit boards. Also, since ideal vise uses such as circuit board wiring and jewelry making, involve soldering, the vise head assembly of the PanaVise 201 Junior miniature vise is highly resistant to heat, with a continuous heat tolerance to 350 degrees F (177 degrees C) and intermittent heat up to 450 degrees F (204 degrees C). Flexible Base Mount Options The PanaVise 201 Junior miniature vise offers great flexibility of its mount possibilities. The zinc base included can be used as a stand-alone support when working with light items, or can be used to secure the vise permanently to a flat surface via its three countersunk holes (screws not included). In addition to this, the PanaVise 201 Junior miniature vise is compatible with a range of base accessories that allow for mounting and using your vise wherever your work takes you. Key Features - Multi-use mini-vise suited to small-sized projects like arts and crafts, model making, electronics, jewelry making and more
- The easy-to-use "split-ball" adjustment element utilizes single knob controls for head movement through 3-planes
- Fine/coarse adjusting knob controls jaw pressure for delicate work
- Grooved jaws are excellent for holding small objects and are made of reinforced thermal composite plastic
- Durable, heat-tolerant vise head assembly construction
- The vise features compatibility with all PanaVise base mounts and many other accessories
Specifications - Overall height: 6-3/4" (173 mm)
- Rotation: 360 degrees
- Swivel: 360 degrees
- Pivot: 210 degrees
- Continuous heat tolerance: Up to 350 degrees F (177 degrees C)
- Intermittent heat tolerance: Up to 450 degrees F (204 degrees C)
- Vise opening: up to 2.875" (73 mm)
- Jaw width: 1" (25.4 mm)
- Jaw height: 2" (50.8 mm)
- Weight: 1.2 lbs. (0.6 kg)
- Base
- 4.3125" (109.5 mm) diameter bolt circle
- .300" center hole
- Three counter sunk holes for 1/4" (6.3 mm) flathead screws (not included)
- Compatible with other PanaVise base mounts
What's in the Box - PanaVise model 201 "Junior" miniature vise (includes model 203 PanaVise head assembly, PanaVise Junior base)
- User's manual and warranty information
Limited Lifetime Warranty All PanaVise products are warranted against defective materials and/or workmanship to all original consumer owners from the date of original consumer purchase for the lifetime of ownership by the original consumer owner. In the event of defective materials and/or workmanship, PanaVise Products, Inc. will, without charge, repair or replace, at its option, the defective product within 60-days from the receipt of the defective product. The Warranty does not apply to damage not resulting from defective materials and/or workmanship while in the possession of the original consumer or to unreasonable use by the original consumer, which includes but is not limited to improper installation, or failure to provide reasonable and necessary maintenance. About PanaVise Founded in 1957 by tool and die maker Otto Colbert and currently headquartered in Reno, Nevada, PanaVise is a leader in work holding products. Over the years, a natural outgrowth of this expertise has been continued development of other items which hold things securely and offer a wide range of motion. Important areas in which this has been applied include, Electronics, CCTV Camera Mounts, and Audio/Video Mounts, earning PanaVise the nickname the "the hold it anywhere you want it company."
|
|
|
Kreg KHC-PREMIUM Face Clamp
By: Kreg
Our price:
$20.60
List price:
$21.99
You save
$1.39
(
6%)
- Ensures perfectly flush joint lines
- Holds projects in place
- Clamps with moderate pressure
- 3-1/4" reach
- Use with pocket-hole systems
|
Product Description
Kreg face clamps provide a quick, easy way to hold rails and stiles in place while installing pocket-hole screws. Premium Face Clamp has 3-1/4" reach for face members 2".
|
|
|
Black & Decker 79-010-4 Workmate Swivel Grip Peg, 4-Pack
By: Black & Decker
Our price:
$8.24
List price:
$10.18
You save
$1.94
(
19%)
- Compatible with all "Workmate" models
- Flexible and easy to use
- Easily handles awkward or uncommonly shaped work pieces
- Weighs 3.2-Ounce
- Gives your hand tools greater versatility
|
Product Description
- Fits all "Workmate" models - Holds odd shaped jobs securely - Added versatility for holding odd shaped work pieces securely
Product Description
Compatible with all "Workmate" models, this four-pack of grip pegs from Black & Decker offers versatility and control. Flexible and easy to use, these convenient pegs let you perform a wide variety of tasks--like clamping strips of woods for sanding--with your hand tools. They also give you the option of dealing with awkward or uncommonly shaped work pieces.
|
|
|
MSI-PRO 225-D 51120 Horizontal Quick-Release Toggle Clamps
By: MSI
Our price: $6.49
- Designed for bench holdfasts that require specific production clamping situations
- Secures and releases the workpiece instantly with a light throw of the lever
- Features adjustable rubber pressure tips
- Hand grips are oil and stain resistant
- Maximum clearance is provided by the specially designed toggle mechanism
|
|
|
|
|
Stanley MaxSteel 83-069 Multi-Angle Vise
By: Stanley Hand Tools
Our price:
$28.47
List price:
$29.99
You save
$1.52
(
5%)
- Ideal for arts and crafts, model building, and electronics
- Infinite and lockable positioning achieved with swivel-ball design
- Easily attached to most work surfaces with integral screw clamp
- Durable cast-aluminum and steel construction
- Removable jaw pads protect surfaces from marring and damage
|
Product Description
Made of durable cast aluminum. 2 7/8'' jaw opening can hold a wide range of items. Removable jaw pads. Ball pivot design allows numerous lockable positions.
Product Description
The Stanley Maxsteel multi-angle vise is ideal for arts and crafts, model building, and electronics. It has infinite and lockable positioning achieved with a swivel-ball design. It can be easily attached to most work surfaces with integral screw clamp and is made from a durable cast-aluminum and steel construction. It also features removable jaw pads which protect surfaces from marring and damage.
|
|
|
QuickFist® Clamps
By: End of the Road, Inc
Our price:
List price:
$10.95
You save
(
%)
- Holds objects 1" to 2 1/2" (25mm to 64mm) in diameter.
- Mounts easily to keep shovels, axes, hoses, rifles/shotguns, fishing gear and other tools or implements securely in place.
- Use on work vehicles, off road trucks, military equipment, law enforcement vehicles, fire trucks, 4x4s, ATVs, RVs, boats or on any wall.
- Each clamp supports approximately 22lbs (10kilos).
- Blister pack hold two clamps.
|
Product Description
QUICK FIST (Package of 2) holds objects 1" to 2 1/2" (25mm to 64mm) in diameter. Mounts easily to keep shovels, axes, hoses and other tools or implements securely in place. Use on work vehicles, fire and police units, off road trucks, military equipment, 4x4s, ATVs, RVs, boats or on any wall. QUICK FIST Clamps are made in the USA of heavy duty transportation grade rubber and are not affected by hot or cold climates or salt. The rubber is also UV resistant.
|
|
|
IRWIN SET150 6-Piece Clamp Set
By: IRWIN
Our price:
$53.13
List price:
$88.42
You save
$35.29
(
40%)
- IRWIN 6-piece clamp set with pistol grip handles and quick-release trigger
- 12-inch bar clamps convert into spreader as well
- Heat-treated steel bars, high-tech resin, and non-marring pads
- Includes 2 12-inch bar clamps, 2 6-inch mini bar clamps, and 2 2-inch spring clamps
- Backed by lifetime warranty
|
Product Description
This Irwin SET150 6-piece clamp set is a great value. Included in this set are 2 12-inch Quick Change Quick-Grips which can be used as a regular bar clamp and can convert into a spreader as well. You also get 2 6-inch mini bar clamps which are great for your smaller clamping needs. Also included in this set are 2- 2-inch Handi-Clamps which provide speed and convenience with adjustable pressure. The jaws are designed to reach around odd shapes, just squeeze to adjust, and lock and click to release. The Quick Change and the Mini Bar Clamps feature a unique pistol grip handle that allows you to hold the clamp and slide the jaw to work with one hand. Other features include a quick-release trigger, durable pads, and heat treated steel bar for increased tool life.IRWIN 6-piece clamp set with pistol grip handles and quick-release trigger12-inch bar clamps convert into spreader as wellHeat-treated steel bars, high-tech resin, and non-marring padsIncludes 2 12-inch bar clamps, 2 6-inch mini bar clamps, and 2 2-inch spring clampsBacked by lifetime warranty
|
|
|
Big Horn 11741PK 4-Inch Key Hose Clamp, 5-Pack
By: Big Horn
Our price:
$9.79
List price:
$11.37
You save
$1.58
(
14%)
- Provides leak-proof seal
- Easy to tighten
- No tools required
|
Product Description
Our 4-Inch stainless steel Key Hose Clamps hand tighten for a leak-proof seal, even in tight spaces. No tools required. 5-Pack.Provides leak-proof sealEasy to tightenNo tools required
|
|
|
Vise-Grip 18-6SP Locking C Clamp with Swivel Pads
By: IRWIN
Our price:
$11.39
List price:
$16.05
You save
$4.66
(
29%)
- Wide-opening jaws provide greater versatility in clamping a variety of shapes
- Swivel pads hold tapered work, awkward fabricating jobs, and delicate projects without damaging the work surface
- Turn screw to adjust pressure and fit work. Stays adjusted for repetitive use
- Constructed of high-grade heat-treated alloy steel for maximum toughness and durability
- Guarded release trigger quickly unlocks and protects from accidental release
|
Product Description
IRWIN Vise-Grip locking pliers - The World's Most Versatile Hand Tool
|
|
|
Bessey BPC-34 3/4-Inch H Style Pipe Clamp
By: Bessey
Our price: $13.39
- H style base prevents clamps from tipping over
- Crank handle clears work surface when opening and closing the jaw on the clamp
- 4 soft jaw caps are included to prevent damaging materials being clamped
- Durable powder coat finish
- Zinc plated clutch components, black oxide coated threaded spindle
|
Product Description
The "H" shaped foot assembly stabilizes the clamp in two dimensions giving dual-axis stability to the work piece and industry leading clearance from the work surface.
|
|
|
Lansky Super "C" Clamp
By: Lansky
Our price:
$12.83
List price:
$19.99
You save
$7.16
(
36%)
- Strong, portable base for Lansky Sharpening System
- Aircraft grade aluminum
- 1 year - materials & workmanship
|
Product Description
The Convertible Super “C” Clamp Mount has a unique two-piece design featuring aircraft grade aluminum construction that allows you to attach your Lansky Sharpening System on vertical horizontal or curved surfaces.
|
|
|
5.5" KELLY Hemostat FORCEPS (Straight)
By: SE
Our price:
List price:
$4.95
You save
(
%)
- Made of stainless steel construction
- Serrated jaw provides vise like grip when hemostat is locked
- Made In Pakistan
|
Product Description
Straight Forceps 5.5 in. Self-Locking.Forceps are a handheld, hinged instrument used for grasping and holding objects. Forceps are used when fingers are too large to grasp small objects or when many objects need to be held at one time while the hands are used to perform a task. These are utility grade and not for medical use.
|
|
|
Wolfcraft 3681404 One-Hand Ratcheting Band Clamp
By: Wolfcraft
Our price:
$25.32
List price:
$35.99
You save
$10.67
(
30%)
- Ratcheting band Clamp ideal for gluing picture frames, furniture, shelves and other workpieces
- Self-adjusting corners to hold various angles
- Quick-retract band, and an encasement for the band so that it is protected and won't twist
- 16-feet of strap accommodates all common projects
- Encased band is protected and won't twist.
|
Product Description
The Wolfcraft Ratcheting Band Clamp is the ideal clamping aid for gluing picture frames, furniture, shelves and other workpieces. Featuring self-adjusting corners to hold various angles, and a true one-hand ratcheting, this tool makes clamping fast and easy. Other features include a quick-retract band encasement for the band so that it is protected and won't twist, and 16 feet of strap accomodates all common projects.
Product Description
Adjust to size automatically with just the push of a button! Easy-to-use ratcheting handle allows for true one-hand operation and fine precise adjustments. Provides positive, even pressure for a wide range of woodworking projects.
|
|
|
All-In-One Clamp XWJ Wide Jaws Fixture for All-In-One Clamp (2-Pack)
By: E. Emerson Tool Co
Our price:
$13.71
List price:
$24.99
You save
$11.28
(
45%)
- Fits all E. Emerson Tool Co. Straight Edge Clamping Tool Guides
- Aluminum jaws increase width of clamping surface to 3 3/4 inches
- Includes 4 screws for installation
- Additional holes in jaw allow for attachment of customer supplied story sticks
- Set of two aluminum jaws for one clamp
|
Product Description
The E. Emerson Tool Company WJ All-in-One Wide Jaws squares clamps and provides extra jaw height to keep straight edges square. Durable aluminum resists wear, a rubber face protects wood from damage, and the story stick attachment helps you line up your cuts. This pack includes 2 jaws.
|
|
|
TEKTON 4017 4-Inch Heavy Duty "C" Clamp
By: TEKTON
Our price:
$7.79
List price:
$15.99
You save
$8.20
(
51%)
- Heavy Duty Malleable Steel Frame
- Chrome Plated Steel Screw with Swivel Pad
- Sliding T-Bar Handle
- Durable Baked Enamel Finish
- Lifetime Guarantee
|
Product Description
Tekton by M.I.T. 4 inch Heavy Duty C Clamp features: Heavy-Duty Malleable Steel Frames, Precision-Machined Screw Assembly, Chrome Plated Steel Screw and Swivel Pad, Sliding T-Bar Handles, Baked Gray Enamel Finish, Jaw Opening: 4 inch, Throat Depth: 2.25 inch
|
|
|
TEKTON 4027 6-Inch Heavy Duty "C" Clamp
By: TEKTON
Our price:
$9.62
List price:
$12.99
You save
$3.37
(
26%)
- Heavy Duty Malleable Steel Frame
- Chrome Plated Steel Screw with Swivel Pad
- Sliding T-Bar Handle
- Durable Baked Enamel Finish
- Lifetime Guarantee
|
Product Description
Tekton by M.I.T. 6 inch Heave Duty C Clamp features: Heavy-Duty Malleable Steel Frames, Precision-Machined Screw Assembly, Chrome Plated Steel Screw and Swivel Pad, Sliding T-Bar Handles, Baked Gray Enamel Finish, Jaw Opening: 6 inch, Throat Depth: 2.75 inch
|
|
|
Set of 25 PVC-Coated 2" Steel Wire Clips - Six Bright Colors
By: Pro Tool
Our price:
List price:
$7.49
You save
(
%)
- Super-handy easy-to-use for clothesline & dozens of other uses excellent quality, made in Taiwan
- Strong spring-steel coated with PVC for superior hold; non-scratch and corrosion resistant
- 2" clips with 3/4" jaw capacity, 1" throat-depth; colors white, red, blue, black, purple & pink
- String clothesline through center of spring for clothes pins you can't lose!
- Great for securing paper, fabric and other material; loop handles allow easy hanging
|
Product Description
|
|
|
Denali 14-Piece Spring Clamp Assortment
By: Denali
Our price:
$12.02
List price:
$34.99
You save
$22.97
(
66%)
- Featuring the most common sized spring clamps, a great addition to anyone's home or shop
- Soft plastic articulating jaw pads won't mar or damage your workpiece
- Glass reinforced nylon construction for strength
- Includes six 3/4-inch clamps, four 1-inch clamps, two 2-inch clamps, two 3-inch clamps
- Heavy duty cold-formed spring for longer life
|
Product Description
Here's fast clamping strength, where and when you need it. Always-ready spring clamps with soft, articulating jaw pads won't mar or damage your work surface, and the glass-reinforced nylon construction provides plenty of strength for tight clamping. The ergonomically designed, soft handles fit comfortably in your hands, and the clamp itself features a cold-formed spring for long life. Set includes six 3/4-inch clamps, four 1-inch clamps, two 2-inch clamps, and two 3-inch clamps.
|
|
Complete List of Tools
Complete List of
Outdoor Products
|
Canada
UK
Germany
