|
DEWALT DC500 2-Gallon 12-to-18-Volt Cordless/Corded Wet/Dry Vacuum
By: DEWALT
Our price:
$99.00
List price:
$182.16
You save
$83.16
(
46%)
- Runs off of 12-volt and 18-volt DEWALT battery packs or 120-volt ac
- Gore wet/dry filter traps 99.7% of drywall dust
- Wet/dry filter eliminates change overs
- Washable filter; tap or water rinse to clean
- Heavy-duty rubber hose provides durability and flexibility; drain port on tank for easy emptying of liquids
|
Product Description
Offering convenient corded and cordless cleanup, the two-gallon DEWALT DC500 wet/dry vacuum sucks up big work shop messes and job site debris quickly and efficiently. A high-efficiency wet/dry filter handles particles as small as 0.3 microns and captures 99.7-percent of dust, letting you present finished products neatly and keep fine drywall dust and other health hazards out of the air.  Wet/dry filter eliminates changeovers (view larger).  | DC500 2-Gallon Cordless/Corded Wet/Dry Vacuum At a Glance: - Wet and dry performance with 2-gallon tank
- Gore wet/dry filter traps 99.7 percent of drywall dust
- On-board hose, cord and accessory storage
- Uses 12- or 18-volt batteries (not included)
- Three-year limited warranty; one-year free service
| |  | | Other convenient features include an on-board hose design, cord and accessory storage that makes moving from site to site easy, and a drain port on the tank for quick, spill-free disposal of liquids. This vacuum runs off either 120-volt AC power or optional 12-/18-volt DEWALT batteries (batteries and charger not included). Washable Wet/Dry Filter At the heart of the DC500's performance is a Gore HEPA wet/dry filter that's rated at 0.3 microns and traps 99.97 percent of dust particles. This capture rate helps to keep work sites looking their best and helps to keep the air you breathe cleaner and safer. And since it's a wet/dry filter, you don't have to worry about time consuming change overs between jobs. This washable filter is incredibly easy to clean. You can either tap the filter clean or rinse it clean with water--no big mess or complicated cleanup. DEWALT's XRP Extended-Life Battery System In addition to using 12-volt batteries, the DC500 vacuum is also compatible with DEWALT's 18-volt XRP extended run time batteries, which provide up to 40 percent more run time than standard Ni-Cad batteries. And any XRP battery can be used with any 18-volt DEWALT tool, which allows you to expand your system by adding other DEWALT cordless tools (sold separately) as the demands of your job grow. Warranty This DEWALT tool is backed by three-year limited warranty covering any defects due to faulty materials or workmanship (from the date of purchase). It's also covered by DEWALT's one-year free service contract, where DEWALT will maintain the tool and replace worn parts caused by normal use--for free. What's in the Box DEWALT DC500 2-gallon cordless/corded wet/dry vacuum; 5-foot rubber hose; crevice tool; wide nozzle; operating instructions (12- or 18-volt batteries sold separately)  Heavy-duty rubber hose provides durability and flexibility (view larger). |
|
|
|
Bigg Lugg BL2-3BM 2 Belt Clip Tool Holding System with 3 Bungee-Balls
By: Bigg Lugg
Our price:
$9.90
List price:
$12.99
You save
$3.09
(
24%)
- Much more comfortable than the traditional tool hook system
- Works with a wide range of power tools such as corded or cordless drills, saws and pneumatic tools
- Will hold non power tool items like paintball guns, water bottles or anything you can get the Bungee-Ball around
- Will not catch on obstructions when not in use
- 1-3/4-inch diameter rubber pad keeps the belt clip in place and spreads out the pressure from the tool on your hip
|
|
|
|
|
Ingersoll Rand 121K6 Super Duty Air Hammer with 6-Piece Chisel Kit
By: Ingersoll-Rand
Our price:
$87.85
List price:
$145.44
You save
$57.59
(
40%)
- Professional touch trigger for total control
- Long-life tool with a tough one piece alloy barrel
- Easy to maintain, with an "easy out" throttle valve assembly
- Kit includes: a blow molded plastic case with a removable lid and 6 chisels
- Air hammer comes in a blowmolded case with 6 chisels
|
Product Description
Ingersoll Rand’s 121K6 super-duty air hammer with six-piece chisel kit makes fast work of body panel crimping and cutting, bushing driving, shearing, and general front-end work.  | 121K6 Air Hammer
With 6-Piece Chisel Kit
At a Glance:- Professional touch trigger for total control
- Long-life tool with a tough one-piece alloy barrel
- Easy to maintain, with an easy-out throttle valve assembly
- Complete with six assorted steel chisels
- Kit dimensions: 3.9 inches by 12.7 inches by 9.7 inches; weighs 4.2 pounds
|
| |
|
Ingersoll Rand's 121K6 kit includes the 121 super-duty air hammer, six durable steel chisels, and a sturdy blow-molded case. View larger | |
FeaturesThe 121K6 kit combines Ingersoll Rand’s 121 super-duty pneumatic hammer with six assorted high-quality steel chisels that have been tested to meet the harshest of job environments and tasks. The hammer comes with a coil-spring retainer for fast and easy chisel changes, and the kit’s included chisels are: one 3/4-inch flat-blade chisel, one punch chisel, one claw ripper-edging tool, one single-blade cutter, one kwik cutter, and one vee chisel-spot welder breaker. The 121 hammer reaches 3,000 blows per minute at 90 PSI and has a 2.28-inch stroke lengthâand its light weight (3.5 pounds) aids in user comfort, making it easier to work through longer jobs more quickly. Whether chipping, punching, or cutting, the tools provided in this kitâwhich also includes a sturdy black blow-molded storage and carrying caseâincrease productivity thanks to powerful and sturdy construction.
About Ingersoll Rand
With a history dating back to 1871, Ingersoll Rand and its family of brands represents a proven history in construction, mining, industrial, and commercial markets. Through acquisitions, innovations, and customer focus, today's Ingersoll Rand offers market-leading solutions and services that enable customers to create progress through a variety of industries and markets that touch everyday life.
What's in the Box
One Ingersoll Rand 121K6 super-duty air hammer with six chisels and one storage/carrying case.  | | Ingersoll Rand's 121K6 kit features the compact but powerful 121 air hammer. (Click to enlarge) |
Product Description
This Ingersoll Rand air hammer makes fast work of body panel crimping and cutting, bushing driving, shearing and front end work. Blows Per Minute (BPM): 3,000, Air Consumption (CFM): 3, Stroke Length (in.): 2 9/32, Bore Diameter (in.): 3/4, Shank Diameter (in.): 0.401, Air Inlet Size (in. NPT): 1/4, Min. Hose Size (in.): 3/8, Chisels Included: Yes, Case Included: Yes
|
|
|
Senco DS275-18 Cordless Collated Screwdriver
By: Senco
Our price:
List price:
$269.99
You save
(
%)
- Cordless 18 volt battery power for the demanding needs of professional remodelers and contractors.
- Drives 1 to 3"screws ,even in hard woods.
- Easy depth of drive adjustment regulates the precise amount of countersink
- Trigger lock with reverse for continuous work
- Fast easy 50 screw strips to speed up production.
|
Product Description
Includes DS275-18V, Cordless 18V Duraspin Collated Screwdriver - 2P0001R, 1-Hour Charger, 18V Ni-Cd Battery, (2) Nosepieces (one for drywall and one for wood), Case
|
|
|
DEWALT DW979K-2 12-Volt NiCd Cordless Drywall/Deck Screwdriver
By: DEWALT
Our price:
List price:
$350.66
You save
(
%)
- Dual speed ranges (0-800/0-2,300 rpm); high speed for drywall, low speed for decking
- Depth-sensitive, set and forget nosepiece for consistent fastener depth
- DEWALT-built high-performance motor with fan-cooling delivers maximum power and durability
- Weighs 4.2 pounds
- Included with screwdriver: one-hour charger, two 12-volt batteries, magnetic bit holder, drywall nosepiece, TEKS nosepiece, and heavy-duty kit box
|
Product Description
The DeWalt DW979K-2 12-volt Ni-Cad cordless drywall/deck screwdriver features a dual speed range: 0-to-800 RPM for drywall applications and 0-to-2,300 RPM for decking applications. Key features include a depth sensitive "set and forget" nosepiece for consistent fastener depth and a high-performance motor with fan cooling for maximum power and durability. This screwdriver features a 1/2-inch hex chuck and weighs 4.2 pounds. This screwdriver comes with a one-hour charger, two 12-volt batteries, one magnetic bit holder, a drywall nosepiece, a TEKS nosepiece, and a heavy-duty kit box.
|
|
|
DriveMaster 14.4V Cordless Drill
By: Drive Master
Our price:
List price:
$49.99
You save
(
%)
- Ideal for small jobs around the home or shop
- 8 step torque control for more precise screwdriving
- 3/8 inch JACOBS® keyless chuck for quick and easy bit changing
- Features (2) double ended screwdriving bits for job convenience
- Includes 1 battery and a 3-5 hour charger
|
Product Description
If you ever plan to tackle anything tougher than screwing or unscrewing light switch covers and battery compartments, you really want a good, basic drill/driver around the house. The DriveMaster is just that--a solid drill/driver suitable for hanging pictures and shelves, drilling holes for drywall anchors, anchoring furniture, or putting together "assemble yourself" furnishings--at a price that is truly remarkable. DriveMaster has clearly chosen to make voltage their strong point. At time of writing, you won't find another 14.4-volt drill/driver at anywhere near this price. A couple of 9.6-volt models only come close. A higher voltage means that you will generally be able to operate the drill longer between battery charges. You can work with the DriveMaster for a good, solid hour without having to recharge the tool, which is important for things like putting together "assemble-yourself" furniture. The last thing you want to do is leave a table standing on two legs while you wait for a battery to recharge. At 4.5 pounds, this is one of the lighter drill/drivers available, which is nice for the less burly, or anyone who wants to avoid wrist fatigue. There is a clutch with 8 torque settings, which is what makes it a drill/driver instead of just a drill. Just set the drill to the tension you want. When the drill meets a certain resistance level (for example, when your screw has been set), it will just spin without applying force to the screw. This helps prevent stripping screw heads and damaging whatever it is you are screwing into. The forward reverse switch is conveniently located above the trigger for quick and smooth directional changes. There is built-in storage for 2 bits on the base. The keyless 3/8-inch Jacob's chuck provides quick bit changes and a strong grip.--Tod Harrick What's In The Box
Includes 3/8-inch drill, 2 double-ended screwdriving bits, 1 battery, and a 3-5 hour charger.
|
|
|
DEWALT DC410KA Heavy Duty 4-1/2-Inch 18 Volt Cordless Cut-Off Tool
By: DEWALT
Our price:
List price:
$422.91
You save
(
%)
|
Product Description
When you need a cutter and there's no electric power around, this 18-volt cordless cut-off tool is your best bet. At 6,500 rpm, you'll get high power for all kinds of cutting and grinding applications. Trim rebar, steel pipes and iron rails with ease. Wheel-changing is easy, thanks to the spindle lock, and the three-position side handle offers great control. We like the easy grip, the comfortable trigger switch and the lock-off feature. The neatly designed grinding guard lets you sand and polish, too. Best of all, if you already own a DeWalt 18-volt tool, the battery's the same--you get two in this box --and a one-hour charger's included.--Kris Jensen-Van Heste
|
|
|
DEWALT DW941K-2 14.4-Volt 18 Gauge Cordless Swivel Head Shear
By: DEWALT
Our price:
List price:
$573.80
You save
(
%)
|
Product Description
Effortlessly cut into metal applications with the DEWALT DW941K-2 cordless shear. Equipped with the dynamic 14.4-volt variable speed, fan cooled motor with changeable brushes, the DW941K-2 offers plenty of power with all the versatility of a cordless tool. The blade continually shears with a 7/32-inch metal strip, which coils from the work piece in order to offer reliable and precise results while rotating from 0 to 2,300 rpm. This cordless shear also features 360-degree, pivoting tool head, which enables you ergonomically maneuver it into constricted spaces. The shear kit includes a one-hour charger, two XR PACK batteries with longer life, and rugged kit box.
|
|
|
Makita 4190DW 3-3/8-Inch 9.6-Volt Cordless Tile/Glass Saw
By: Makita
Our price:
List price:
$378.00
You save
(
%)
- Tilting base for bevel cutting up to 45°
- Compact and lightweight
- Blade lock for easy blade replacement
- Refillable water coolant bottle
- Adjustable cutting depth
|
Product Description
Includes 9.6V Cordless 3-3/8-in Tile/Glass Saw - 4190DW-R, 9.6 Volt 1.3 Ah Ni-CD Battery 9000 - 632007-4, Charger - DC9700, Diamond Blade - 724950-8C, Hex Wrench - 783202-0, Water Supply - 122387-1, Operating Manual
|
|
|
Black & Decker V7210 7.2-Volt Double Action DustBuster Cordless Vac
By: Black & Decker
Our price:
List price:
$40.00
You save
(
%)
- Exclusive filter lasts three times longer than previous filters
- 13.6-ounce bowl holds 70 percent more dirt and debris
- Charges in wall-mounted base for convenience
- Crevice tool and upholstery brush included
- Tools stored onboard for convenient use
|
Product Description
.
Product Description
The Double Action DustBuster cordless vac offers all the extras of previous DustBusters, but with more oomph per feature. The exclusive Double Action DustBuster filter now lasts three times longer, the 13.6-ounce bowl holds 70 percent more dirt and debris, and the unit comes with a crevice tool for reaching into narrow spaces and an upholstery brush for gathering dirt and hair. The extra tools are stored conveniently onboard, making it a whole lot more difficult to lose them in the closet. Like DustBusters of the past, this one charges in a wall-mounted base for grab-and-go convenience. Your dirt won't stand a fighting chance. --Rivers Janssen
|
|
|
Bare-Tool Makita 9500D 7.2-Volt 4-Inch Cordless Angle Grinder (Tool Only, No Battery)
By: Makita
Our price:
List price:
$107.20
You save
(
%)
- Delivers up to 10 minutes of continuous use (under normal operating conditions) from a single charge
- Compact and lightweight (2.2 lbs.) for easy operation
- Lock-on button for continuous operation
- Shaft lock for easy wheel removal
- Wrench retainer for operator convenience
|
Product Description
Lock-on button for continuous operation. Shaft lock for easy wheel removal. Wrench retainer. For light deburring, rust, and paint removal, metal cleaning, and sharpening. Battery and charger sold separately.
|
|
|
Wagner Power Products 0156060 Cordless Power Roller
By: Wagner
Our price:
List price:
$64.77
You save
(
%)
- Dual-speed, self-feeding, 9-inch roller system
- Paints up to 40 gallons of paint on one set of 4 "D" cell batteries (not included)
- Two speed paint flow control
- Includes faucet adapter and brush for faster clean-up
- One year limited warranty
|
Product Description
Apply up to 40 gallons on one set of batteries. For interior/exterior latex or oil-based paints. Includes the following:. Cordless roller with 9 x 3/8" nap roller. Paint tray, spatter shield. 18" extension. Clean-up kit. Uses (4) D-cell batteries.
|
|
|
Black & Decker MT1203K-2 12-Volt Multi-Tool Cordless Kit
By: Black & Decker
Our price:
List price:
$131.43
You save
(
%)
- Drill/driver, jig saw and sander/polisher all operate off the same power unit
- Rubber-grip handle with steel plate texture for comfort and control
- Drill/driver features keyless chuck and 24-position clutch
- Jig saw bevels 45 degrees for added versatility
- Sander accepts all Mouse attachments and accessories
|
Product Description
12 volt - 0-700 rpm. 3-in-1 tool kit. Use to drill/drive, sand/polish & cut. 24 position clutch for screwdriving. QuickClamp blade change system. Detail sanding pad for tight sanding. Hook & loop pad for quick sandpaper removal. Keyless chuck for quick bit changing.
Product Description
Cordless convenience is what you'll find with the three-in-one Black & Decker MT1203K-2 12-volt multitool kit. Powered by a rechargeable 12-volt battery pack, the multitool offers three tools--a drill/driver, jig saw, and sander/polisher--in one powerful unit. To change applications, simply switch out one attachment for the next. It's that easy. With the multitool, you don't have to compromise performance for convenience--the tool delivers both, no matter which attachment you use. The drill/driver, for example, offers variable speeds of 0 to 700 rpm, a keyless chuck, an electric brake, and 24 preset torque positions. The jig saw operates at 0 to 3,000 spm and features, among other things, tool-free blade changing, a blade support roller, and a 45-degree bevel for just the right cut. The sander/polisher spins at 0 to 8,000 opm and is compatible with all the attachments and accessories that go with Black & Decker's popular Mouse sander. The whole thing comes housed in an impact-resistant, molded-plastic storage case that can go anywhere with you. --Carl Thress
|
|
|
DeWalt DRBATCP Jobsite Radio and Charger Combination with 18-Volt XRP Battery Combo Pack
By: DEWALT
Our price:
List price:
$318.00
You save
(
%)
|
Product Description
The DeWalt Heavy-Duty Radio Charger with 18-Volt XRP Battery Pack allows the user to listen to AM/FM radio, and CD, when plugged into the auxiliary port. The radio is cordless, running off 7.6-to-18-volt DeWalt batteries. Other features include a digital tuner with LCD display, built-in clock, and eight station memory presets. High-efficiency, weather-resistant speakers with dual bass ports offer maximum bass and range. The dual pivoting 11-inch flexible antenna provides more durability and better reception than standard radios. A one-hour charger for 7.2-to-18-volt battery packs is included. What's in the Box
Heavy-Duty Radio Charger, 18-Volt XRP Battery Pack, and 1-hour charger.
|
|
|
Makita 4093D 9.6-Volt Cordless Vacuum
By: Makita
Our price:
List price:
$108.00
You save
(
%)
- Provides strong suction for fast and efficient cleaning
- 2-speed sliding switch (high or low)
- Redesigned suction port can clean floors without a nozzle; extensions held in place more securely
- Ergonomic handle design for operator comfort and control
- Utilizes either disposable paper vacuum bags or reusable dust bag
|
|
|
|
|
Makita 6831DWA Cordless Autofeed Screwdriver Kit
By: Makita
Our price:
List price:
$347.75
You save
(
%)
- Shoots up to 1-5/8" screws
- 2000 RPM
- Belt clip
- Screw depth adjustment setter
- Feeds screws automatically
|
Product Description
Feeds screws automatically one after the other; no more bothersome one-by-one setting/driving. Has powerful 12V (2Ah) battery with in-line D-handle design for easy operation and excellent balance. It has a compact design (13-3/8-inch overall length) with easy screw depth adjustment for convenient and consistent depth setting. Equipped with belt clip for attaching to belt or holster. Includes battery 1222, charger DC1411, Belt clip, battery cover, hex wrench, 3 ea. Philips bit and plastic tool case.Shoots up to 1-5/8' screws2000 RPMBelt clipScrew depth adjustment setterFeeds screws automatically
|
|
|
Bare-Tool Makita 4013DZ 12-Volt Cordless Vacuum (Tool Only, No Battery)
By: Makita
Our price:
List price:
$105.00
You save
(
%)
- Conveniently located sliding switch for operator comfort
- Ergonomic handle and on-board storage of nozzle for convenience
- Uses both disposable paper vacuum filters or reusable dust bag (included)
- Works with most 12-Volt Makita batteries & chargers (sold separately)
- Includes (2) nozzles, extension, paper filters and dust bag
|
|
|
|
Complete List of Tools
Complete List of
Outdoor Products
|
Canada
UK
Germany
