|
|
(4 Customer Reviews)
|
|
10 PCS Diamond Hole Saw Cutter Tile Marble Glass Stone
By: SE
Our price:
List price:
$120.00
You save
(
%)
|
Product Description
10 Pc Diamond Hole Saw Set, Sizes: 1/4, 3/8, 1/2, 3/4 and 1 on 1/4 Shank.Sizes: 1.1/4,1.3/8, 1.1/2, 2, 2.3/8 on a 3/8 Shank., Comes in a Wooden Box.
|
|
|
|
(2 Customer Reviews)
|
|
Proxxon 37080 Hot Wire Cutter THERMOCUT
By: Proxxon
Our price:
$104.00
List price:
$112.50
You save
$8.50
(
8%)
- Cutting wire temperature 360-Degree Fahrenheit for clean cuts
- Double function fence with lockable feed bar
- Working surface of Aluminium cobond compound for ease of pushing work pieces
- Printed grid and protractor are applied to the base
|
Product Description
Used to cut Styrofoam and thermoplastic materials, both freehand and with stencils. Note: Styrofoam is a reasonably priced material and compared to others environmentally acceptable. Ideal for architectural models, prototypes as well as classic railroad, plane and boat model building. The large base with 15 23/64" x 11 1/64" (390 x 280 mm) table ensures smooth and easy movement of the work piece. The printed grid and protractor assist with division and cutting. Solid aluminum over arm has a 13 25/32" (350 mm) throat and offers 5 33/64" (140 mm) in height. The holder and wire coil (98 ft, .008" diameter is included) may be shifted along the over arm to enable miter cutting. An LED indicates operation and helps prevent burned fingers (the cutting wire heats to the maximum temperature in less than 1 second). Note: The correct temperature, being dependent on material and thickness, is learned from experience. Optimum profiles are cut at lower temperatures and cutting force. Technical data: Cutting Wire Temp 210-290°F Transformer Secondary Max 10V at 1.0A Volts 110-120V AC, 60 Hz Weight 6.6 lb.Crosscuts are achieved by means of a simple, yet efficient solution: secure a drawing-pin to the work table with tape, it serves as a fixed center. Double function fence with lockable feed bar.Spare cutting wire: Used on the THERMOCUT and other similar units. Made of NiCr 8020, spool of 98 ft x .008". NO 28 080 Proxxon tools come with a 2 year factory warranty.
|
|
|
|
(10 Customer Reviews)
|
|
Malco SRT2 Straight Handled Siding Removal Tool
By: Malco
Our price:
List price:
$8.49
You save
(
%)
- Offset blade tip won't hang up in material
- One piece steel
- Non-slip grip
|
Product Description
Straight Handle Siding Removal Tool, Made In USA.
|
|
|
|
(7 Customer Reviews)
|
|
Freud EB-090 Hand Trimmer for Edge Banding
By: Freud
Our price:
$15.69
List price:
$21.10
You save
$5.41
(
26%)
- Trims top and bottom of edge banding in one pass
- Cuts a flush or beveled edge
- Spring loaded with replaceable knives
- Manufacturer's 1-year limited warranty
- Covered by Freud's limited one year power tool warranty
|
Product Description
The Freud Hand Trimmer for Edge Banding trims the top and bottom of the edge banding in one pass. This hand trimmer cuts a flush or beveled edge. Spring loaded with replaceable knives, this hand trimmer is covered by Freud's 1-year limited warranty.
|
|
|
|
(3 Customer Reviews)
|
|
Malco SL5 Vinyl and Aluminum Snap Lock Punch
By: Malco
Our price:
$17.44
List price:
$17.99
You save
$0.55
(
3%)
- For secure locking tabs in vinyl siding
- Spring return handles with vinyl grips
|
Product Description
Snap Lock Punch For Vinyl & Aluminum Siding, Made In USA.
|
|
|
|
(3 Customer Reviews)
|
|
Xcelite 170M 5" Shearcutter Micro Series
By: Cooper Tools
Our price:
List price:
$6.99
You save
(
%)
- Low profile, general-purpose cutter
- Superior blade by-pass shear cutting action
- Better cuts with half the effort
- Greatly reduced mechanical shock delivered to the work
- Features red grips
|
Product Description
General purpose cutter with flat return spring and cushioned grips. 5" in length. Vendor #170M. Net weight: 1/4 lb.
|
|
|
|
(3 Customer Reviews)
|
|
Fuller Tool 315-0268 Pro 8-Inch Mini Bolt Cutter for Small Screws Nails and Wire
By: Johnson Level & Tool
Our price:
$10.58
List price:
$12.99
You save
$2.41
(
19%)
- Designed to cut soft and medium metals (small screws, nails and wire)
- Heat-treated chrome molybdenum steel jaws
- Adjusting screws allow for easy and perfect alignment of jaws
- Strong tubular handles with slip-proof rubber grips
- Professional quality
|
|
|
|
|
|
(3 Customer Reviews)
|
|
Knipex 7102200 8-Inch Lever Action Mini-Bolt Cutter - Comfort Grip
By: Knipex Tools
Our price:
$42.82
List price:
$71.26
You save
$28.44
(
40%)
- Comfort Grip Two-Color Dual Component Handles
- Cuts Material like Bolts, Nails, Rivets up to 5.2mm
- Exceptional Cutting Performance with Minimum Effort Due to Lever Action Design
- Cutting Edges Induction Hardened, Cutting Edge Hardness Approximately 64 HRC
- Chrome Vanadium Electric Steel, Oil-Hardened and Tempered
|
|
|
|
|
|
(2 Customer Reviews)
|
|
DataShark 70034 110 Non-Impact Punchdown Tool
By: Paladin Tools
Our price:
$11.78
List price:
$11.93
You save
$0.15
(
1%)
- Good quality tool at affordable price
- Terminate Cat5, Cat5e & Cat6 UTP/STP cable into jacks and panels
- Fixed 110 blade
- Comfortable handle
- Non-impact-style punchdown tool
|
Product Description
The Paladin Tools 110 Punchdown Tool with Fixed Blade 70034 quickly makes new 110 wall jacks for your computer network or repair existing ones.
|
|
|
|
(3 Customer Reviews)
|
|
Irwin 2078305 Vise-Grip 5-Inch Wire Stripper and Cutter
By: IRWIN
Our price: $9.70
- Versatile 5-inch wire cutter/stripper
- 10 to 24 AWG selection dial adjusts for stripping wire of varying gauges
- Comfortable textured grips reduce hand slippage
- Easy to see blue handle
- Pre-sharpened
|
Product Description
The pre-sharpened Irwin 5-Inch Wire Stripper/Cutter features a reliable and accurate 10-24 AWG dial that easily adjusts for stripping wire of varying gauges. Also included are comfortable textured grips that reduce hand slippage.
|
|
|
Ridgid 32975 1/8-Inch to 5/8-Inch Close Quarters Tubing Cutter
By: Ridgid
Our price: $12.70
- Model 103
- Capacity: 1/8-Inch-5/8-Inch
- Specifically designed for use in restricted spaces
- Useful for small diameter, hard and soft copper, aluminum, brass and plastic tubing
- Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool
|
Product Description
Midget Tubing Cutters Type: Midget Tubing Cutter Maximum Pipe Capacity: 5/8 Minimum Pipe Capacity: 1/8 Cuts Material Type: Copper, Aluminum, Brass & Plastic Tubing Model Number: 103
|
|
|
Goldblatt G15850 Blade Runner Drywall Cutting Tool
By: Goldblatt
Our price:
$58.38
List price:
$74.69
You save
$16.31
(
22%)
- Cuts any shape straight lines in seconds
- Cuts 90 degree corners in one pass
- Cuts curves arches and odd shapes fast and neat
- Replacement blades are easy to change simply push ejection button and install the new cartridge.
- Two magnetic halves mirror each other cutting both sides of the drywall at the same time
|
Product Description
Bladerunner Drywall Board Cutting Device, Cuts 1/2", 5/8" & Exterior Drywall.
|
|
|
Cutters® Triple Playmaker Wristcoach
By: Cutters Gloves
Our price:
List price:
$19.99
You save
(
%)
- Three clear plastic windows, storing up to 60 plays
- Spandex construction for optimal fit
|
Product Description
You'll never have to worry about forgetting a play with the Cutters® Triple Playmaker Wristcoach. Made with spandex for an optimal fit, the Triple Playmaker has three clear plastic windows which can display up to 60 plays at once.
|
|
|
|
(2 Customer Reviews)
|
|
Malco S9 9-Inch Aluminum Hand Seamer
By: Malco
Our price:
$47.04
List price:
$48.60
You save
$1.56
(
3%)
- 9-inch aluminum jaws
- 2-inch bending depth
- Ideal for fascia corners
- One-hand operation
|
Product Description
9" Seamer, For Use In Bending & Hemming Aluminum & Lightweight Metal, For Use In Soffit & Facia & Window Trim Applications.
|
|
|
|
(3 Customer Reviews)
|
|
Fuller Tool 316-0270 1/4-Inch Cut Capacity 14-Inch Bolt Cutter
By: Johnson Level & Tool
Our price:
$13.07
List price:
$13.79
You save
$0.72
(
5%)
- Cuts up to 1/4"
- Heat-treated high-carbon steel jaws
- Adjusting screws allow for easy and perfect alignment of jaws
- Strong tubular handles with rubber grips
|
|
|
|
|
|
(1 Customer Reviews)
|
|
IRWIN 4-1/2-Inch Flush Diagonal w/Spring 2078925
By: IRWIN
Our price:
$15.00
List price:
$15.45
You save
$0.45
(
3%)
- High leverage for greater force at the jaw
- Induction hardened cutting edge
- Nickel chromium steel construction
- ProTouch grip
- Spring loaded
|
|
|
|
|
|
(3 Customer Reviews)
|
|
Neiko Tools Heavy Duty 4,000 LB Bolt Cutter - Chrome Molybdenum Blades - 30"
By: Neiko Tools
Our price:
List price:
$49.99
You save
(
%)
- High fulcrum-point multiplies effort
- 50 lb pressure yields 2 tons of jaw cutting-force on bolt
- Incredibly strong and resilient chrome-molybdenum jaws maintain sharpness cut-after-cut
- Curved 26" alloy-steel handles with PVC textured secure-grip handles for sure hold
- Unbelievably fast and easy cutting of bolts, locks up to 7/16" diameter
|
Product Description
Neiko Tools USA 30" Heavy Duty Bolt Cutter * Satin finished Chrome-Moly Steel Jaws * Blade clearance adjusted with eccentric bolt * 30" length * Precision engineered lever-fulcrum design converts 50 lbs of force at the handle to 4000 lbs of pressure betwe
|
|
|
|
(1 Customer Reviews)
|
|
Bosch 1575A Foam Rubber Cutter
By: Bosch
Our price:
$313.20
List price:
$609.00
You save
$295.80
(
49%)
- 3.2 Amps / 3,200 SPM
- Blades and guides (sold separately) in four different lengths - to suite the thickness of the work piece and application
- Twin counter-reciprocating blade action - ensures precise cutting, plus low vibration and noise
- Footplate with wheels (sold separately) - allows tool assembly to roll on to worktable or floor to ensure perpendicular cut and to keep blade guide from dragging and scratching table or floor
- Tool-free blade change system - for fast and easy blade changes
|
Product Description
Heavy-duty for fast, production cutting of all densities of foam rubber & flexible plastic foams * Versatile, will cut all types of carpeting - Features: Quick tool-free blade change * Long, paddle-type switch & slim motor housing are easy to grip * Doubl
|
|
|
|
(12 Customer Reviews)
|
|
Qual-Craft 1000B Shingle Shark Shingle Cutter
By: Qual-Craft
Our price:
$299.99
List price:
$499.50
You save
$199.51
(
40%)
- Designed to allow for accurate and repeatable cuts at any angle
- Can be used for lengthside cuts for a starter course
- Two offset holes (one for metric and one for U.S. shingles)
- Crosscut guide adjusts a full 180 degrees for any angle
- Cuts face up or face down, and from either the top or bottom edge
|
Product Description
Design to allow for accurate and repeatable cuts at any angle and lengthwise cuts for starter course used along lower edge of the roof. Cuts any asphalt or fiberglass shingle, starter row either U.S. or Metric, material face up or face down and from eithe r top or bottom edge, and ridge cap. Two offset holes, one for metric or U.S. shingles. Crosscut guide adjust full 180-degrees for any angle. Can be set up by using a cleat to prevent slippage or set up by using a piece of 2 x 10 Lumber and footing the to ol against it or by using 6" x 90-degree roof bracket.
|
|
|
Klein 11057 Klein-Kurve Wire Stripper/Cutter, Blue
By: Klein
Our price:
$18.76
List price:
$24.02
You save
$5.26
(
22%)
- Precision shear-type blades for clean cuts on solid and stranded copper wire with easy-to-read markings on both sides
- Curved handles help reach into confined areas. Wire looping and bending holes
- Strong-gripping serrated nose; for easy bending, shaping and pulling of wire
- Precision-ground stripping holes
- Handy closure lock for convenient storage
|
Product Description
Precision shear-type blades for clean cuts on solid and stranded copper wire. Easy-to-read markings on both sides Curved handles help reach into confined areas. Wire looping and bending holes. Coil spring provides fast self-opening action. Precision-groun d stripping holes.Strong-gripping serrated nose; for easy bending, shaping, and pulling of wire. Screw-shearing holes. Handy closure lock for convenient storage. Double-dipped comfort grips. Blue and red Handles. Strips and Cuts: 20 - 30 AWG Solid and 22 - 32 AWG Stranded.
|
|
|
CRAFTERS HOT KNIFE, Foam Cutter w/ 6" Blade, Gets up to 700 degrees F
By: TL MARSHALL CO
Our price:
- 6" Stainless Steel Blade
- Single Blade Construction without attachments
- 700 Degrees F (Heater located inside the blade)
- 6' Electric Cord, 110 volts, 130 watts
- 90 Day Limited Warranty
|
Product Description
New Heavy Duty Hot Knife Carves a Niche in Hobbies & Crafts
Burbank, Calif. Finally, professionals and hobby model makers get the right tool at the right price with the Crafter's Hot Knife.
This tool is popular for cutting wax and with model railroaders and wargamers for carving of foam terrain. The hot knife also caught on with theater crews building props and sets. The Crafter's Hot Knife is a step up from traditional wire cutters, offering maneauverability and rigidity as two clear advantages. "The Crafter's Hot Knife brings a new dimension to the modeler's table for carving many types of foam. The knife makes plunge cuts into blocks and shapes possible. Bow cutters cannot make the plunge cuts. The maneuverability of the knife is superior to anything else that I have found on the market," says Miles Hale, Master Model Railroader, Vice President Association of Professional Model Makers. The most distinguishing difference of The Crafters Hot Knife is the rigid and solid, 6" Stainless Steel blade. It slices quickly and cleanly through high-density foam without bending, warping or breaking like common wire cutters.
Other features include 110 volt, 130 watts and a 6' electric cord. Temperature is controlled by the user with a "dead man's switch" that delivers the power up to 700 degrees fahrenheit temperatures. This light/medium duty tool will shut down to cool instead of burning out after 5-10 minutes of continual use.
"We knew we had something good when we hit the market with the Crafter's Hot Knife", says TL Marshall Company president, Lorraine Marshall. "The market offered crafters and hobbyists only hot wires to carve foam. With the popularity of foam terrain, props, crafts and the booming cottage candlemaking industry.
Features & Benefits of the Pro-1 Hot Knife
* Rigid Stainless Steel Blade will not bend, warp or break * Economical & Durable * Up to 750 degrees F
* Heats up in 1 minute * 110 AV, 130 watts * 6' Electric Cord
|
|
|
|
(1 Customer Reviews)
|
|
Knipex 6101200 8-Inch High Leverage End Cutters - Bolt Cutters
By: Knipex Tools
Our price:
$51.78
List price:
$78.30
You save
$26.52
(
34%)
- Plastic Coated Handles
- High Cutting Capacity with Minimum Effort due to Optimum Transmission Ratio
- Better Handling, Greater Capacity and Lower Hand Force Required Compared to Conventional Bolt End Cutting Nippers
- Cutting Edges Induction Hardened, Cutting Edge Hardness Approximately 64 HRC
- Vanadium Electric Steel, Oil-Hardened and Tempered
|
|
|
|
|
|
(1 Customer Reviews)
|
|
Olfa Circle Cutter
By: Olfa
Our price:
List price:
$23.99
You save
(
%)
- Circle cutter
- Uses RB18-2 and PRB18-2 blades
- Ratchet mechanism, blade cover
|
Product Description
Easily and efficently cuts circles from 1 7/8" to 8 1/2" . Reduces wrist fatigue and includes plasic blade guard.
|
|
|
|
(4 Customer Reviews)
|
|
Channellock 358 8-Inch End Cutting Plier
By: Channellock
Our price:
$22.38
List price:
$29.91
You save
$7.53
(
25%)
- End cutting pliers
- Perfectly mated cutter, heat treated to hold its edge
- Polished high carbon drop forged steel
- Channellock blue comfort grips
- 100% guaranteed against breakage and failure
|
Product Description
Hand-honed, perfectly mated cutters, heat treated to hold their edge. Precision made of the fine polished forged steel. Channellock Blue dipped plastic comfort grips. Meets Government Specifications GGG-N-350A, Type I, Class 2, Style A.
|
|
|
Mibro 414161 3-Piece Tapered Plug Cutter Set
By: The Mibro Group
Our price:
$13.76
List price:
$17.99
You save
$4.23
(
24%)
- Cuts an accurate tapered plug for a secure and seamless fit
- Robust cutting prongs are extremely durable for cutting dense hardwoods
- Titanium Nitride coating extends service life and reduces heat build up eliminating scorching
|
|
|
|
|
|
(1 Customer Reviews)
|
|
Channellock 369 9-1/2-Inch High Leverage Linesman Plier
By: Channellock
Our price:
$21.61
List price:
$32.81
You save
$11.20
(
34%)
- High leverage/rounded nose
- Perfectly mated cutter, heat treated to hold it's edge
- Polished high carbon drop forged steel
- Channellock blue comfort grips
- 100% guaranteed against breakage and failure
|
Product Description
9", Hi-Leverage Linemens Pliers, Have Knife Anvil Cutting Design & Laser Heat Treated Cutting Edges That Last Longer & Cut Clean Every Time, Superior Performance C1080 Steel, Electronic Coated For Ultimate Rust Prevention, Blue Comfort Grips, Made In USA.
|
|
|
|
(1 Customer Reviews)
|
|
Milwaukee 2490-24 12-Volt Compact Drill, Hackzall Saw, Pipe Cutter, and Worklight Combo Kit
By: Milwaukee
Our price:
$349.00
List price:
$646.57
You save
$297.57
(
46%)
- M12 ¼¿ Hex Screwdriver delivers 150 in-lbs of torque with a 15 position clutch and 0-500 RPM for fast driving.
- 12V Sub-compact Driver, Hackzall Saw, Pipe Cutter, Worklight, (2) Batteries, Charger, Contractor Bag, Phillips bit, Metal blade, Wood blade
|
Product Description
When it comes to power, speed and portability in a smaller package, nothing beats the M12 system of cordless tools from Milwaukee Tool. This innovative series of cordless tools are precisely scaled to deliver the power, speed or torque required for professional applications, and they fit neatly into your tool pouch. Tools Included: Hackzall, Subcompact Driver, Tubing Cutter, and Flashlight, Storage Case Included: Yes, Volts: 12, Battery Type: M12, Battery Included: Yes (2), Charger Included: Yes
|
|
|
Wheeled Cutters Mosaic Glass Tile
By: HF Tools
Our price:
List price:
$29.99
You save
(
%)
- Wheeled Tile and Glass Nipper
|
Product Description
Fast and easy precision cutting of glass, porcelain mosaic and ceramic tile, terrazzo, agate, and seashells up to 1/4" thick
Long-lasting carbide cutting wheels and 3mm hex wrench
Cast steel pliers with coil springs and vinyl grips
Jaw capacity: 1/32" to 1/4"; Length: 8";
|
|
|
|
(3 Customer Reviews)
|
|
Dremel 543 1-1/4 inch Cutting/Shaping Wheel
By: Dremel
Our price:
$13.85
List price:
$19.66
You save
$5.81
(
30%)
- Use the edge of the wheel for cutting and slotting.
- Use the "face" of the wheel for shaping.
- Do not use on metal.
- Cuts 33% deeper than former Cutting/Shaping Wheel...up to 1/2"
|
Product Description
* Cutting and shaping wheel * For cutting and shaping on soft and hard woods, fiberglass, plastics and laminates * Not for use on metal * Coated on both sides with tungsten carbide grit for long life * Cuts and finishes in one operation * Cuts 33% deeper * 1-1/4" bit diameter
|
|
Complete List of Tools
Complete List of
Outdoor Products
|
Canada
UK
Germany
