|
Milwaukee 4096 Diamond Coring Motor 450/900 RPM, 20 Amp with Clutch
By: Milwaukee
Our price:
$735.67
List price:
$1,300.00
You save
$564.33
(
43%)
- Two speeds: 450 and 900 rpm, 20 amp motor, Clutch protection protects gears and motor, Built-in water swivel
- Built-In Water Swivel, Water Hose Adapter
- Clutch protection protects gears and motor
- Built-in water swivel
- Limited warranty, 30-day no-risk trial
|
Product Description
Diamond coring motors are used with Vac-U-Rig and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 Amp model features 4.8 peak horsepower with a 450 or 900 RPM operating speed. U.S.A. Speed - No Load (RPM): 450 / 900, Volts: 120, Max. HP: 4.8, Amps: 20, Motor Protection: Clutch, Spindle Size (in.): 1 1/4 - 7, Suggested Diameter in Medium Aggreate (in.): 6 - 10 (450) / 2 - 6 (900), Tool Weight (lbs.): 24
|
|
|
5/8" Diamond Coated Core Drill (17.0mm) - Made In USA
By: Lasco Diamond Products, Inc.
Our price:
List price:
$20.00
You save
(
%)
- 5/8" Steel Shank - Hole Size Approximately 17.0mm
- Great for cutting 17.0mm holes in stone, glass, wood, tile, and more
- Coated in 100% Natural Diamond (not synthetic)
- U.S. Made - High Quality - Concentricity Guaranteed
- Works best on a drill press
|
Product Description
Lasco's 5/8" Diamond Coated Core Drill works great for drilling 17.0mm holes in stone, glass, wood, tile, metal, and more. It has a 5/8" Steel Shank. It is coated in 100% natural diamond and made in the USA. It works best on a drill press. PLEASE NOTE: Not all drill presses will open up large enough to accept a 5/8" Shank.
|
|
|
Fein 30217355000 5-5/16-in Centering Pin
By: Fein
Our price:
List price:
$29.99
You save
(
%)
- For the KBM 32-Q, KBM 50-QX and KBM 52-U Magnetic Core Drills
|
Product Description
Includes 5-5/16" Centering Pin - 30217355000
|
|
|
Hitachi D13 1/2-Inch 6.2 Amp Drill with Spade Handle
By: Hitachi
Our price:
$153.32
List price:
$313.53
You save
$160.21
(
51%)
- Ideal for long-term use and maximum power
- Powerful 6.2 Amp motor; 5.5-feet-per-pounds of torque
- Auto-stop carbon brushes protect your armature and extend the life of the drill
- Includes a drill chuck, chuck key, and side handle
- 1-year limited warranty
|
Product Description
D13 1/2 Inch 6.2 Amp Drill w/ Spade Handle
Product Description
The Hitachi 1/2-Inch 6.2 Amp Drill with Spade Handle is ideal for long-term use and maximum power. The "Mud Mixer", as it's called on job sites, is powerful enough to mix concrete. With over 5.5-feet-per-pounds of torque, it gets the job done. This spade handle drill has a powerful 6.2 Amp motor with an industrial chuck for that heavy duty job site. With reversible drilling, this Hitatchi drill allows for quick removal of materials with higher efficiency. The three-position side handle increases operability and control, while the two-position D-handle offers greater maneuverability and balance. This tool comes with auto-stop carbon brushes that are easily accessible from the outside. The brushes protect your armature and extend the life of the drill. It comes with a limited 1-year warranty on parts and labor. What's in the Box
Hitachi 1/2-Inch 6.2 Amp Drill with Spade Handle, drill chuck, chuck key, and side handle.
|
|
|
SDT 185 Wet Core Drill Stand Concrete Boring Rig 8" w/ Powerful 3500 Watt Motor
By: Steel Dragon Tools
Our price:
|
Product Description
The SDT-185 Wet Core Drill Rig Drills up to 8" Holes through Granite, Stone, Marble, Concrete, Asphalt, Brick, Block, Pipe, Rebar Enforced Concrete, etc ...A Powerful 3500 watt Motor delivers Extra Torque for the Toughest Drilling Jobs. A full line of Diamond Wet Core Drill Bits are available from 1-1/2" - 14" Performance: - Suitable for Sampling Concrete, Cement, Brick, Bituminous Pavement and Block
- Powerful 3500W Induction 115V 60Hz 15 Amp high-speed series motor
- Water Tight On/Off switch
- 2" x 2" Column with Rack and Pinion Gear System for Exact Drilling Depth
- Maximum Boring Diameter.: 8"
- Maximum Boring Depth : 19.7"
- Motor Spindle: 1 -1/4" x 7
- Spindle Speed: 600RPM
- 3 Prong 115 volt Grounded Plug
- Drill Bit pictured is not included
- Bottom Base measures 8" x 7" with 4 Bolts amd brackets
- Overall Height of the core drill rig stand is 34" inches
- Net Weight: 43lbs
Warranty: 1 Year Full Warranty Shipping Weight and Dimensions: 47 Lbs
Measures 35 x 16 x 9
|
|
|
Hitachi DS14DSFL 14.4-Volts Lithium-Ion 1.5 Amp Cordless Drill Driver
By: Hitachi
Our price:
$129.99
List price:
$274.47
You save
$144.48
(
53%)
- Powered by a 1.5 amp Hour li-ion slide type battery for a steady level of power throughout the charge
- 50 percent lighter weight than traditional NiCd and NiMH batteries
- 300 inch-pounds of torque to drill and drive through materials with ease
- 22+1 stage adjustable clutch with 22 drive settings for optimal torque and 1 drill setting for increased control
- 3/8-inch keyless chuck for quick tool-less bit changes and a metal belt hook for easy accessibility
|
Product Description
* Covered by Hitachi's industry leading Lifetime Tool warranty for peace of mind, and weighing a mere 3.3 lbs, the DS14DSFL features a sleek design and slim soft grip handle for both comfort and easy maneuverability
* Mechanical 2-speed gearing for increased precision and control
* 300 in/lbs of torque to drill and drive through materials with ease
* 22+1 stage adjustable clutch with 22 drive settings for optimal torque and 1 drill setting for increased control
* 3/8" keyless chuck for quick tool-less bit changes
* Metal belt hook for easy accessibility
* Lightweight and compact - at just 3.3 lbs. and 8-19/32" in length
* Flashlight included that features a 5-position pivoting head so that light can be aimed as needed
|
|
|
SDT 85 4" Portable Wet Dry Core Hand Held Drill Rig for Diamond Bits
By: Steel Dragon Tools
Our price:
|
Product Description
The SDT-180HCD is a Powerful Portable Handheld Core Drill Rig. The 2000 watt motor spinning at 2000 rpm drills holes up to 4". The Duel Threaded Chuck accepts a standard size 1-1/4" x 7 Thread and 12/16" Thread. Feel Comfortable this tool fits most Core Drill Bits. - Drill up to 4" Holes in Concrete, Asphalt, Block, Brick, etc...
- 2000 Watt Motor at 2000 RPM 115 Volt 60 HZ
- 1-1/4" x 7 and 13/16" Duel Threaded End fits most bits
- 9 ft Power Cord with Grounded Plug
- 1/4" ribbed inlet and Brass Ball valve for water inlet
- Ergonomic Design with 4 adjustable handles
- Drill Weight is 17 lbs
- Blue Plastic Carrying Case included
- 1 Year Warranty
Weight and Dimensions: 20 x 17 x 7 " and 22 lbs
|
|
|
Amico Hardened Steel Metal Center Punch Set Drilling Working
By: Amico
Our price:
- Hardened, forged and tempered Center Punch Set for maximum strength and durability
- Point Sizes included: 1/4", 5/32", 1/4"; Shank Diameter: 7/16", 5/16", 5/16"
- Total Length: 5 7/8", 4 7/8", 4 7/8".
- Weight: 221g
|
Product Description
This Handy Center Punch Set is heat treated to last through even the hardest punishment. The Metal Center Punch Set's carbon steel shaft and tip are strong enough for the toughest jobs. This Hardened Steel Center Punch Set has heat treated carbon steel construction.
|
|
|
Target Core Drill Stand DS6C
By: Target
Our price:
|
Product Description
Combo base with vacuum pad is standard and eliminates the need for an additional vacuum base. Drill holes up to 6" (153mm) in diameter. Maximum height of 32" allows drill stand to operate in confined spaces.
|
|
|
MK 158368 MK-130/3 3 Speed Hand Held Wet Core Drill
By: MK Diamond
Our price:
$1,279.99
List price:
$1,669.00
You save
$389.01
(
23%)
- Drilling Capacity: 3" (hand-held), (6" rig mounted)
- Motor 110V / 16Amp
- Speed 1st Gear 600 RPM
- Speed 2nd Gear 1300 RPM
- Speed 3rd Gear 2800 RPM
|
Product Description
158368 Features: -Wet Core Drill MK-130/3.-Three-speed gearbox.-Slip clutch.-Built-in water swivel.-Thermal overload switch.-Overload indicator light.-Ground fault interrupter.-Metal carrying case.-Item # 158368.-Load Speed 1st Gear: 600 RPM.-Load Speed 2nd Gear: 1300 RPM.-Load Speed 3rd Gear: 2800 RPM.-Connecting: 1-1/4'' - 7.-Threads: 5/8'' - 11, G1/2''.-Drilling Capacity: 3'' (hand-held), 6'' (rig mounted). Specifications: -Motor: 110V / 16 Amps. Dimensions: -Weight: 29 lbs.
|
|
|
MK Diamond Portable Drill Stand for MK-2000P and MK-130
By: MK Diamond
Our price:
- Portable drill stand for MK-2000P and MK-130/3 hand-held drills. Combination anchor/vacuum base.
|
Product Description
159253 Features: -Portable Drill Stand for MK-2000P and MK-130/3 Hand-Held Drills.-Combination anchor/vacuum base.-Adjustable column for angle drilling.-53mm reducer ring required to mount the MK-2000P to stand.-Item # 159253.-Drill capacity diameter: 6''.-Motor mount: 60mm (fits MK-130/3). Dimensions: -Dimensions: 30-1/2'' L x 15-1/2'' W x 9'' H.-Weight: 24.5 lbs.
|
|
|
Milwaukee 4094 Diamond Coring Motor 450/900 RPM, 20 Amp with Shear Pin
By: Milwaukee
Our price:
$699.99
List price:
$1,300.00
You save
$600.01
(
46%)
- Two speeds: 450 and 900 rpm, 20 amp motor, Shear pin protection protects gears and motor, Built-in water swivel
- Built-In Water Swivel, Water Hose Adapter
- Shear pin protection protects gears and motor
- Built-in water swivel
- Limited warranty, 30-day no-risk trial
|
Product Description
Diamond coring motors are used with Vac-U-Rig and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 Amp model features 4.8 peak horsepower with a 450 or 900 RPM operating speed. U.S.A. Speed - No Load (RPM): 450 / 900, Volts: 120, Max. HP: 4.8, Amps: 20, Motor Protection: Shear Pin, Spindle Size (in.): 1 1/4 - 7, Suggested Diameter in Medium Aggreate (in.): 6 - 10 (450) / 2 - 6 (900), Tool Weight (lbs.): 24
|
|
|
Diamond Products 01751 NA Core Bore Core Bore Milwaukee 4004 20 Amp Diamond Coring Motor with On/Off
By: Diamond Products
Our price:
|
Product Description
4244033 Milwaukee 4004 20 Amp Diamond Coring Motor with On/Off SwitchDiamond Products has the widest selection of blades, core bits, rigs, saws, highway grooving, grinding equipment and accessories. With the industries highest quality diamond tools, Diamond Products make sure you get the job done right and fast.Features and Specifications:Milwaukee 4004 heavy duty electric drill motor20 amp motor with clutchClutch protection protects gears and motorVoltage 120 ACNo load RPM: 300/600With on/off switchAlso available without on/off switch, product 01754Water connection 1.250"-7 threaded spindle4.8 peak horsepowerMaximum drill bit capacity in concrete 14"Suggested diameter in medium aggregate: At 450 RPM the capacity is 6" to 10"; At 900 RPM capacity is 2" to 6"Includes: Built-in water swivel, water hose adapter, water control valve, open end wrench5 year limited warrantyAbout Diamond Products:As a world leader in the manufacturing and distribution of diamond tools and equipment, Diamond Products has the widest selection of wet and dry diamond blades and diamond core bits. They provide the largest selection of core drill rigs, concrete saws, masonry and block saws, and wire saws along with highway grooving and grinding equipment, custom concrete trucks and specialty equipment for all your job requirements. Diamond Products is also committed to sustainable practices for a cleaner environment and is currently 75% recyclable.
|
|
|
Milwaukee 4090 Diamond Coring Motor 375/750 RPM, 15 Amp with Shear Pin
By: Milwaukee
Our price:
$672.99
List price:
$1,250.00
You save
$577.01
(
46%)
- Two speeds: 375 and 750 rpm, 15 amp motor, Shear pin protection protects gears and motor, Built-in water swivel
- Built-In Water Swivel, Water Hose Adapter
- Shear pin protection protects gears and motor
- Built-in water swivel
- Limited warranty, 30-day no-risk trial
|
Product Description
Diamond coring motors are used with Vac-U-Rig and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 Amp model features 4.8 peak horsepower with a 375 or 750 RPM operating speed. U.S.A. Speed - No Load (RPM): 375 / 750, Volts: 120, Max. HP: 2.5, Amps: 15, Motor Protection: Shear Pin, Spindle Size (in.): 1 1/4 - 7, Suggested Diameter in Medium Aggreate (in.): 5 - 8 (375) / 2 1/2 - 5 (750), Tool Weight (lbs.): 26
|
|
|
C32 Pro III Segment or Pointed Brazed Wet Core Bits Size: 2-1/2"
By: Diteq
Our price:
List price:
$188.00
You save
(
%)
- Turbo C32 Segmented Quality Levels 2 : Size: 2-1/2". Specification: C32.
- The pointed segments feature the highest diamond concentration & SLICE through toughest applications
- Cut through the heaviest steel reinforcing without glazing over or dulling.
- The pointed segments seat quickly and cut with less wandering and vibration.
|
Product Description
D32056 Size: 2-1/2" Features: -C32 Pro III Segment or Pointed Brazed Wet Core Bits.-Cut through the heaviest steel reinforcing without glazing over dulling.-Wet only.-The pointed segments feature the highest diamond concentration and slice through the toughest applications with blazing speed and remarkable life.-Bit Diameter: 1/2''-1-1/2'', 1-5/8''+.-Adapter Thread Size: 5/8''-11, 1-1/4'-7''.-Preferred by the professionals.-The pointed segments seat quickly and cut with less wandering and vibration.-3/8''-1-3/4'' are standard C32 segments.-1-7/8''>are pointed C32 segments. Options: -Additional sizes available upon request. Dimensions: -Other sizes: 1/2'' L, 5/8'' L, 3/4'' L, 7/8'' L, 1'' L, 1-1/8'' L, 1-1/4'' L, 1-3/8'' L, 1-1/2'' L, 1-5/8'' L, 1-3/4'' L, 1-7/8'' L, 2'' L, 2-1/4'' L, 2-1/2'' L, 2-3/4'' L, 3'' L, 3-1/4'' L, 3-1/2'' L, 4'' L, 4-1/4'' L, 4-1/2'' L, 4-3/4'' L, 5'' L, 5-1/2'' L, 5-3/4'' L, 6'' L, 6-1/4'' L, 6-1/2'' L, 7 '' L, 8'' L, 9'' L, 10'' L, 11'' L, 12'' L, 14'' L.-Diameter: 3/8'' L.
|
|
|
Hitachi DS18DVC 18-Volts Driver Drill, 1.4 Amp Hour Ni-Cd
By: Hitachi
Our price:
$90.87
List price:
$198.00
You save
$107.13
(
54%)
- Class-leading 398 in-lbs of turning torque to power through the toughest jobs
- 2-speed transmission and variable speed switch for ultimate speed control (0-450 RPM or 1250 RPM)
- 22+1 stage clutch settings for precise torque adjustment and a drill mode to fit the application
- On-tool bit holder and 1/2-Inch keyless chuck allow for convenient bit-swapping
- Non-slip ergonomic grip for increased user comfort and control
|
Product Description
The DS18DVC cordless driver drill is powered by an 18 Volts Ni-Cd battery system. With just under 400 in-lbs of torque, this drill can power through tough jobs with ease. Featuring Hitachi's signature grip for comfort and compact yet ergonomic design, the DS18DVC is the perfect drill for anyone looking for a great value to venture into the 18 Volts cordless category.Class-leading 398 in-lbs of turning torque to power through the toughest jobs2-speed transmission and variable speed switch for ultimate speed control (0-450 RPM or 1250 RPM)22+1 stage clutch settings for precise torque adjustment and a drill mode to fit the applicationOn-tool bit holder and 1/2-Inch keyless chuck allow for convenient bit-swappingNon-slip ergonomic grip for increased user comfort and control
|
|
|
SDT 180 HCD 4" Portable Wet Dry Core Hand Held Drill Rig for Diamond Bits
By: Steel Dragon Tools
Our price:
|
Product Description
The SDT-180HCD is a Powerful Portable Handheld Core Drill Rig. The 2000 watt motor spinning at 2000 rpm drills holes up to 4". The Duel Threaded Chuck accepts a standard size 1-1/4" x 7 Thread and 12/16" Thread. Feel Comfortable this tool fits most Core Drill Bits. - Drill up to 4" Holes in Concrete, Asphalt, Block, Brick, etc...
- 2000 Watt Motor at 2000 RPM 115 Volt 60 HZ
- 1-1/4" x 7 and 13/16" Duel Threaded End fits most bits
- 9 ft Power Cord with Grounded Plug
- 1/4" ribbed inlet and Brass Ball valve for water inlet
- Ergonomic Design with 4 adjustable handles
- Drill Weight is 17 lbs
- Blue Plastic Carrying Case included
- 1 Year Warranty
Weight and Dimensions: 20 x 17 x 7 " and 22 lbs
|
|
|
Diamond Products 31060 NA Core Cut Core Cut CC1600 Optional Wall Saw Cart 31060
By: Diamond Products
Our price:
|
Product Description
5800972 CC1600 Optional Wall Saw CartDiamond Products has the widest selection of blades, core bits, rigs, saws, highway grooving, grinding equipment and accessories. With the industries highest quality diamond tools, Diamond Products make sure you get the job done right and fast.Features and Specifications:Saw carts make horizontal cutting easier and eases operator fatigue4 wheel cartAbout Diamond Products:As a world leader in the manufacturing and distribution of diamond tools and equipment, Diamond Products has the widest selection of wet and dry diamond blades and diamond core bits. They provide the largest selection of core drill rigs, concrete saws, masonry and block saws, and wire saws along with highway grooving and grinding equipment, custom concrete trucks and specialty equipment for all your job requirements. Diamond Products is also committed to sustainable practices for a cleaner environment and is currently 75% recyclable.
|
|
|
Milwaukee 4004 Diamond Coring Motor 300/600 RPM, 20 Amp with Clutch
By: Milwaukee
Our price:
$717.28
List price:
$1,300.00
You save
$582.72
(
45%)
- Two speeds: 300 and 600 rpm, 20 amp motor, Clutch protection protects gears and motor, Built-in water swivel
- Built-In Water Swivel, Water Hose Adapter, Water Control Valve, Open End Wrench
- Clutch protection protects gears and motor
- Built-in water swivel
- Limited warranty, 30-day no-risk trial
|
Product Description
Diamond coring motors are used with Vac-U-Rig and Dymorig diamond core rigs to drill holes into reinforced concrete. This 20 Amp model features 4.8 peak horsepower with a 300 RPM or 600 RPM operating speed. U.S.A. Speed - No Load (RPM): 300 / 600, Volts: 120, Max. HP: 4.8, Amps: 20, Motor Protection: Clutch, Spindle Size (in.): 1 1/4 - 7, Suggested Diameter in Medium Aggreate (in.): 7 - 14(300) / 4 - 7(600), Tool Weight (lbs.): 24
|
|
|
SDT-80 1-1/2"- 4" Wet Core Hand Held Drill Rig for Diamond Bit 1350 Watt Motor
By: Steel Dragon Tools
Our price:
|
Product Description
- Drill up to 4" Holes in Concrete, Asphalt, Block, Brick, etc...
- 1350 Watt Motor at 1150 RPM 115 Volt 60 HZ
- 1-1/4" x 7 x 22mm Adapter included
- 7 ft Power Cord with Grounded Plug
- 1/4" Ball valve for water inlet
- Yellow Powder Coated Casing with adjustable handles
- Drill Weight is 10 lbs
- Plastic Carrying Case included
- 1150 Rpm Single Speed
- 1 Year Warranty
Weight and Dimensions: 22 x 15 x 7.5 " and 16 lbs
|
|
Complete List of Tools
Complete List of
Outdoor Products
|
Canada
UK
Germany
