|
|
 (11 Customer Reviews)
|
|
PSI Woodworking DBGULP Big Gulp Dust Hood
By: PSI Woodworking
Our price:
$12.35 List price:
$15.95
You save
$3.60
(
23%)
- Dust hood with a 13-by-16-inch opening
- Perfect for miter saws, lathes, radial arm saws, carving, sanding, and planers without hoods
- Lightweight and portable; made from tough ABS plastic
- 4-inch port to connect to any dust collection system
- Weighs 2.2 pounds
|
Product Description
The huge 13 by 16-inch opening on this dust hood from PSI Woodworking makes it ideal for collecting dust from problem machines. Perfect for miter saws, lathes, radial arm saws, carving, sanding, and planers without hoods, this hood is lightweight and portable, and easy to position anywhere. The Big Gulp is made from tough ABS plastic with a 4-inch port to connect to any dust collection system.
|
|
|
 (34 Customer Reviews)
|
|
PSI Woodworking LR110-3 110-Volt Long Ranger Dust Collector Switch
By: PSI Woodworking
Our price:
$47.85 List price:
$64.95
You save
$17.10
(
26%)
- PSI Woodworking Long Ranger dust collector switch with 110-volt, 1-1/2-horspower engine and 20-amp relay receiver
- Turn on a dust collector from anywhere in the shop
- Uses R.F. signal, which is not affected by outside interference by large television transformers, electrical noise, or three-phase power sources
- Includes a circuit breaker in the receiver and a 5-foot power cord
- Ships at 1.84-pounds
|
|
|
|
|
 (32 Customer Reviews)
|
|
PSI Woodworking LR220-3 220V Long Ranger Dust Collector Switch
By: PSI Woodworking
Our price:
$56.65 List price:
$74.95
You save
$18.30
(
24%)
- Turn on/off the dust collector anywhere in the shop
- 220 volt, 2.5 hp, 15 amp relay/receiver
- FCC approved
- Circuit breaker included in the receiver
- 5 foot power cord
|
|
|
|
|
 (75 Customer Reviews)
|
|
DELTA 50-760 1.5HP 1,200 CFM Vertical Bag Dust Collector
By: Delta
Our price:
$429.99 List price:
$724.50
You save
$294.51
(
41%)
- Dust collector with a powerful 1.5 HP motor and innovative vertical design
- Moves up to 1,200 cubic feet of air per minute
- Filters out pollutants as small as one micron
- Measures 35.5 x 20 x 18 inches; weighs 95.6 pounds
- Utilizes clear 6-mil durable plastic bags for changing ease
|
Product Description
Help protect your health with the Delta 50-760 1-1/2-Horsepower, 1,200-CFM Dust Collector. Thanks to one-micron filtration bags, a powerful motor, replaceable dust ports, easy maneuverability, durable construction, and more, the 50-760 provides dependable dust collection for a clean work environment. And even with its powerful suction capability, this dust collector is surprisingly quiet.  | The Delta 50-760 1.5-HP Dust Collector At a Glance:- 1-micron filtration bags
- Powerful TEFC induction motor
- Two 4-inch dust ports, one 5-inch main port
- Snap-in bag rings
- 5-year warranty
|
|  |
| |

Unique, volume-saving vertical design and easy-gliding wheels offer maneuverability. | Keep Your Shop Safe and CleanWith two four-inch replaceable dust ports and an upper filter bag that has the ability to filter out pollutants measuring just one micron in size, this dust collector efficiently extracts fine, invisible dust particles from the air. Much airborne dust--including wood dust--contains chemicals that can trigger severe allergic reactions in humans. And long-term exposure to dust can cause a measurable, sometimes permanent loss of respiratory capacity. This is why it is so important to protect yourself from dust that can lead to health problems down the road. Powerful Dust Collector Goes Where You Go Designed to work as efficiently as possible, the 50-760 features a 1.5-horsepower, 3,450-RPM, 120/240-volt, 60-hertz, single-phase induction motor, which moves up to 1,200 cubic feet of air per minute. And without compromising any of that power, this dust collector has a unique, volume-saving vertical design. So you can clean any work surface or area in your shop, and to make storage a snap, the 50-760 sits on heavy-duty casters, a sturdy steel base, and four glide wheels to allow for easy maneuverability without floor damage. For added convenience, the motor housing can be mounted with the dust ports facing up or down. The 50-760 measures 35.5 x 20.0 x 18.0 inches (WxHxD) and weighs 95.6 pounds. Quick-Change Bags Simplify Dust Collection In addition to the one-micron filtration bag, this collector uses transparent, plastic chip collection bags that make it easy to see when it's time for a bag change. For added convenience, two snap-in bag rings are included for quick and easy bag changes without cam-over-lock clamps. What's in the Box Motor and blower, support frame, one-micron filtration bag with sewn-in bag ring, two six-mil plastic chip collection bags, one snap-in bag ring, two four-inch intake ports, four swivel-caster assemblies, cord, plug, and instruction manual.
|
|
|
 (4 Customer Reviews)
|
|
PSI Woodworking Long Ranger -III Remote
By: PSI Woodworking
Our price: $20.00
- Extra remote handpiece for Long Ranger 3
- Turn on a dust collector from anywhere in the shop
- Uses R.F. signal
- Grounded with reset button
- Programmable
|
|
|
|
|
 (2 Customer Reviews)
|
|
SHOP FOX W1685 1.5-Horsepower 1,280 CFM Dust Collector
By: SHOP FOX
Our price:
$362.38 List price:
$379.99
You save
$17.61
(
5%)
- Powder coated paint
- Bag volume: 5.4 cubic feet
- Static pressure: 10.1-Inch
- Air suction capacity: Approximately 1,280 CFM
|
Product Description
A powerful dust collector from Shop Fox. This unit features an extra heavy-duty 12" steel impeller and a 1-1/2 HP motor that runs on 110V.
|
|
|
 (6 Customer Reviews)
|
|
DELTA 50-720 1-Horsepower Dust Collector 650 CFM
By: Delta
Our price:
$299.00 List price:
$522.90
You save
$223.90
(
43%)
- Dependable one HP TEFC induction motor for longer life and smoother performance
- One micron top filter bags for fine dust removal; Disposable bottom bags for added convenience
- Curved steel impeller produces maximum air velocity (650 CFM)
- Measures 29 x 17 x 68-1/2 inches (LxWxH); weighs 74 pounds
- Includes: 1-micron collection bags, 4-inch x 5-foot collection hose, base with four swivel caster assemblies, (six) clear disposable plastic bags
|
Product Description
The DELTA 50-720 1 HP Dust Collector uses its powerful motor to extract dust created by various machines with four-inch dust collection ports. The dependable one HP TEFC induction motor runs at 3,450 RPM and powers the curved steel impeller for maximum air velocity (650 CFM). The 50-720's one micron top filter bag filters fine dust, and the clear disposable bottom bags give you the convenience of just tossing them when they're full. Thanks to the finned aluminum motor housing, this unit runs ultra-cool during long periods of use. The four swivel casters make it easy to move this dust collector from machine to machine quickly.
|
|
|
 (7 Customer Reviews)
|
|
Shop Fox W1666 2 HP 1550 CFM Dust Collector
By: SHOP FOX
Our price:
$325.05 List price:
$399.99
You save
$74.94
(
19%)
- Air suction capacity: approximately 1,550 CFM
- Static pressure: 12.3-Inch
- Standard bag filtration: 30 Micron
- Motor amplifier draw: 220-Volt to 12A
- Bag volume: 5.4 cubic-Feet
|
Product Description
A powerful new dust collector from Shop Fox! This unit features a 12" steel impeller and has a 2 HP motor that runs on 220V.
|
|
|
 (7 Customer Reviews)
|
|
Grizzly G8027 1 HP Dust Collector
By: Grizzly
Our price:
List price:
$169.95
You save
(
%)
- Air Suction Capacity: 500 CFM
- Bag size (diameter x depth): 14-1/2" x 23" (2)
- Height (With bags inflated): 63"
- Motor Size: 1 H.P., single phase
- Number of 4" Intake Holes: 1
|
Product Description
A great little workhorse at an incredible price! This is a great machine for sanders, router tables, shapers and other work. It's also very portable, so you can take it to the job site where it can handle the big jobs a regular shop vacuum can't handle.
|
|
|
 (1 Customer Reviews)
|
|
JDS 15002 Dust-Gate Expansion Kit
By: JDS Company
Our price:
$38.57 List price:
$51.92
You save
$13.35
(
26%)
- Automatically turn your dust collector on or off by opening or closing Dust-Gates
- Save steps, time, and energy
- Safe low-voltage wiring system
- Includes 2 Dust-Gates, quick connectors and 100-foot low voltage wire
- Easily installs onto a 4-inch dust collector hose or pipe
|
Product Description
The JDS Dust-Gate Expansion Kit saves steps, time and energy. This kit is designed to turn on your dust collector when you open the Dust-Gate to a wood-working machine, and turn off your dust collector when the gate is closed. The switches on all Dust-Gates are wired to the Central Control Box in parallel so that when any of your gates are opened, the dust collector turns on. If several gates are open, the dust collector will not turn off until all gates are closed. The low-voltage switches in the system activate a Central Control Box that turns on the dust collector. Simply plug the Central Control Box into the proper electrical outlet, and then plug the dust collector into the Control Box. This dust-gate easily installs onto a 4-inch dust collector hose or pipe. What's in the Box Two Dust-Gates with switches and quick connectors and a 100-foot low voltage wire.
|
|
|
 (2 Customer Reviews)
|
|
JDS 15000 Dust-Gate Start-Up Kit 110V
By: JDS Company
Our price:
$59.95 List price:
$99.95
You save
$40.00
(
40%)
- Automatically turn your dust collector on or off by opening or closing Dust-Gates.
- Save steps, time, and energy.
- Safe low voltage wiring system.
- Easily installed onto 4" dust collector hose or pipe.
- Start-Up Kit includes: 1 Dust-Gate with switch and quick connectors, 1 Control Box, 100 ft. low voltage wire.
|
Product Description
The JDS 110-Volt Dust-Gate Start-Up Kit saves steps, time and energy. This kit is designed to turn on your dust collector when you open the Dust-Gate to a wood-working machine, and turn off your dust collector when the gate is closed. The switches on all Dust-Gates are wired to the Central Control Box in parallel so that when any of your gates are opened, the dust collector turns on. If several gates are open, the dust collector will not turn off until all gates are closed. The low-voltage switches in the system activate a Central Control Box that turns on the dust collector. Simply plug the Central Control Box into the proper electrical outlet, and then plug the dust collector into the Control Box. This dust-gate easily installs onto a 4-inch dust collector hose or pipe. What's in the Box Dust-gate, central control box, and 100-foot low voltage wire.
|
|
JET 708636CK DC-1100CK Dust Collector with Micron Canister
By: JET
Our price:
$609.99 List price:
$762.00
You save
$152.01
(
20%)
- Industrial-quality construction effectively handles collection of wood chips and sawdust
- Quick-install collection bag makes emptying and re-attaching a snap
- Single-stage design for economical and quiet operation
- Industrial controls designed for years of trouble-free use
- Quick-connect collection bags with elastic band for fast, easy installation and removal
|
Product Description
Includes 1-1/2 HP 1,100 CFM Dust Collector w/ Canister - 708636CK, Canister
|
|
|
 (7 Customer Reviews)
|
|
Shop-Vac 801-75-62 Workshop Sawdust Collection System
By: Shop-Vac
Our price:
$97.99 List price:
$149.09
You save
$51.10
(
34%)
- Workshop sawdust collection system collects sawdust and chips
- Ideal for cleaning up after stationary woodworking tools
- Constructed with 8 36-inch clear pvc collection tubes
- Includes 5 tube couplings, 3 45-degree elbows, 4 Tee-Y fittings, 2 90-degree elbows, 6 vacuum gates, and 10 mounting clamps with hardware
- Attaches with 2-1/2-inch hose to wet/dry vac or dust collection system
|
Product Description
Collects sawdust from woodworking machines. Modular, wall mount design fits any workshop. Attaches to any Shop-Vac with 2.5in hose. Easy-to-clean clear tubing system. Features: 8 x 36in clear PVC collection tubes 6 x Vacuum gates 5 x Tube couplings 3 x 45 degree elbows 4 x Tee-y fittings 2 x 90 degree elbows 10 x Mounting clamps Mounting hardware
Product Description
The Shop-Vac workshop sawdust collection system collects sawdust and chips from all of your stationary woodworking tools. Easy to install, it attaches with a 2-1/2-inch hose to any wet/dry vac or your existing dust collection system. What's in the Box Eight 36-inch clear pvc collection tubes, five tube couplings, three 45-degree elbows, four Tee-Y fittings, two 90-degree elbows, six vacuum gates, and 10 mounting clamps with hardware
|
|
|
 (4 Customer Reviews)
|
|
PSI Woodworking DC725 Portable Tabletop Dust Collector
By: PSI Woodworking
Our price:
$168.24 List price:
$179.95
You save
$11.71
(
7%)
- 3 motors @110v, 1.29 AMPS total with variable speed fan control
- Clear doors w/adjustable hood
- Two Grounded 115v outlets for your power tool
- Convenient carrying handle
- Filter easily removes for cleaning
|
|
|
|
|
 (19 Customer Reviews)
|
|
JDS Company 14040 Dust-Force 1-1/2-Horsepower 1,250 CFM Vertical Bag Dust Collector, 110/220-Volt Pre-Wired 110-Volt
By: JDS Company
Our price: $428.18
- Powerful, portable, and makes your shop a cleaner, healthier, more productive environment
- A forceful 1.5 hp motor provides 1,250 cfm
- Highest performing 1.5 hp dust collector in the industry
- Sturdy steel base with four easy gliding wheels make moving from machine to machine a breeze
- The 1.5 hp motor 110/220 volt comes pre wired for 110 volt; 1-year limited warranty
|
Product Description
Tired of making do with your wet/dry shop vacuum? We don't blame you. Step up to this JDS collection system make all the sawdust you want. After the initial setup (which is a little tedious but not taxing), it's all but maintenance-free; just empty the bag when it's full. This unit moves 1,250 cubic feet of air every minute - that's equivalent to exchanging all the air in a room that's 12 by 13 feet with 8-foot ceilings in 60 seconds. That's pretty impressive. The top bag filters particles down to 1 micron - one millionth of a meter - keeping your shop air clean and clear. On the bottom is a replaceable clear plastic bag that lets you see exactly how much is in your collector, and we like the choice of either throwing the bag away with the contents or emptying it out and reusing it. It's got a 42-gallon capacity, so unless you're making chips eight hours a day, it likely won't need emptying too often. We'd recommend not letting it get full, though, because 42 gallons of sawdust is no picnic to lift. The motor is wired for 110-volt service, a standard household outlet, but it's easily rewired for 220 volts, depending on your shop setup. It's got an abundance of power for running one tool at a time, even a planer, but it's probably not sufficient for more than that. The casters make the unit really mobile, so you can roll it around your shop and connect it to whatever tool you're using, but the casters could be beefier, we thought. We think you'll find, though, that after you use this collector for a while, you'll want to build a system with blast gates and a remote for the unit. It's a natural progression for tool hounds. The woodworker who finally ditches the shop vacuum and brings in this JDS collector will wonder why s/he didn't do it sooner. --Kris Jensen-Van Heste
|
|
|
 (6 Customer Reviews)
|
|
JDS 16001 Dust-Force 1.5-Horsepower 1250 CFM Dust Collector with 1-Micron Canister
By: JDS Company
Our price: $575.00
- 1.5 HP 1,250 CFM dust collector makes shops cleaner, healthier, and more productive environment
- Forceful 1.5 HP motor provides 1,250 CFM
- Sturdy steel base with four easy gliding wheels
- Bottom bag provide 42-gallon capacity; 1-micron top bag captures tiny dust particles
- 1-year limited warranty; 76-inch compact size
|
Product Description
The JDS Dust-Force 1.5 HP 1,250 CFM Dust Collector with 1-Micron Canister makes a shop cleaner, healthier, and more productive environment. A forceful 1.5 HP motor provides 1,250 CFM. The sturdy steel base with four easy gliding wheels make moving from machine to machine a breeze. A spun-bond polyester bottom bag provide a 42-gallon capacity, the 1-micron top bag captures tiny dust particles. The 1.5 HP motor 115/230-volt comes pre-wired for 115-volt. The Dust-Force includes an 11-inch steel fan, and one 5-inch intake port with 2/4-inch diameters. With a 76-inch compact size and powerful performance, this dust collector is ideal for most small shops. It comes with a 1-year warranty.
|
|
Shop Vac Dust Fitting Adapter for 1-1/4'' to 2-1/4'' Diameter Hose
By: Rockler
Our price:
- Durable hard-plastic construction
- Tight friction fit
- Tool free set up no clamps necessary!
|
Product Description
Get more from your Shop Vac! This versatile fitting slides onto standard 1-1/4" Shop Vac hoses, allowing you to hook up suction to 2-1/4" (I.D.) dust ports on router table fences, dovetail jig dust collectors and more. This is the only adapter that will connect Shop Vac hoses to the 2-1/4" ports on Bench Dog ProFence router table fences, Rockler Router Table Dust Ports, Rockler Dovetail Jig Dust Collectors and more.
|
|
|
 (1 Customer Reviews)
|
|
DELTA 50-763 3 Horsepower 4 Bag 2,700 CFM Dust Collector, 230-Volt 1 Phase
By: Delta
Our price:
$1,075.38 List price:
$1,864.00
You save
$788.62
(
42%)
- Dust collector with powerful 3 HP motor
- Design keeps dust from damaging motor
- Dust ports and motor housing can be set to face up or down
- Snap-in bag rings allow for fast setup; chip collection bags show when bags are full
- Also includes 2 filtration bags, 4 plastic chip collection bags, 2 snap-in bag rings, 4 4-inch intake ports, 4 swivel caster assemblies, and instruction manual
|
Product Description
The DELTA 50-763 3 HP 4 Bag 2,700 CFM Dust Collector features a 3 HP single phase motor that provides smooth, long-lasting performance. The smart design keeps dust out of the motor to prevent damage. You can orient the dust ports and motor housing to either face up or down. The dust collector accepts standard one micron filtration bags that keep your shop clean, and the snap-in bag rings allow for fast and easy setup. The 6 millimeter plastic chip collection bags let you know when the bags need to be emptied. The DELTA 50-763 includes 3 HP dust collector, motor and blower, support frame, two 1-micron filtration bags, four 6-millileter plastic chip collection bags, two snap-in bag rings, four 4-inch intake ports, four swivel caster assemblies, instruction manual.
|
|
|
 (20 Customer Reviews)
|
|
DELTA AP300 Shopmaster 3/4-Horsepower 680 CFM Horizontal Bag Dust Collector, 120/240-Volt 1-Phase
By: Delta
Our price:
List price:
$345.77
You save
(
%)
- Curved steel impeller promotes optimum air movement
- Heavy-duty 30-micron dust bag captures wood chips and debris
- Includes a flexible 4-by-10-inch collection hose
- Measures 18.8 x 16 x 22 inches; weighs 50 pounds
- Includes a 4-by-10-inch collection hose, 30-micron dust collection bag, metal dust hood, angled support tube, hardware, clamps, and instruction manual
|
Product Description
The DELTA AP300 Shopmaster 3/4 HP 680 CFM Horizantol Bag Dust Collector cleans up everything from large chips to smaller particles of dust and debris, making it a vital addition to your workshop. The 60Hz, 0.75 HP motor is constructed with a sealed shaft and bearings to diminish noise pollution and improve the life of the machine. Its curved steel impeller promotes optimum air movement while diminishing wear. A sweeping dust hood and heavy-duty 30-micron dust bag work in tandem to capture wood chips, dust, and other debris via a 4-by-10-inch flexible collection hose and adjustable steel support arm. The unit also includes comfortable handles for easy portability.
|
|
JET DC-1100RCK Dust Collector with Remote and Canister Kit
By: JET
Our price:
$669.99 List price:
$834.00
You save
$164.01
(
20%)
- Industrial-quality construction effectively handles collection of wood chips and sawdust
- Quick-install collection bag makes emptying and re-attaching a snap
- Single-stage design for economical and quiet operation
- Industrial controls designed for years of trouble-free use
- Quick-connect collection bags with elastic band for fast, easy installation and removal
|
Product Description
Includes 1-1/2 HP 1,100 CFM Dust Collector w/ Remote and Canister - 708636RCK, Remote Control, Canister
|
|
JET 708636K DC-1100K Dust Collector with Filter Bag Kit
By: JET
Our price:
$399.99 List price:
$508.00
You save
$108.01
(
21%)
- Industrial-quality construction effectively handles collection of wood chips and sawdust
- Single-stage design for economical and quiet operation
- Industrial controls designed for years of trouble-free use
- Quick-connect collection bags with elastic band for fast, easy installation and removal
- High air velocity (CFM) design stands up to any competitive specifications
|
Product Description
Includes 1-1/2 HP 1-Phase Dust Collector - 708636K
|
|
Festool CT MINI 2.6 Gallon Mobile Dust Extractor
By: Festool
Our price:
- 2.6 gallon (10 L) capacity
- Low weight and small size, so you can work clean anywhere, extend the life of tools and consumables
- Tool-triggered or manual start
- Locking brake prevents accidental movement
- Quiet running for a more pleasant working environment
|
Product Description
The CT MINI and CT MIDI are Festool's most portable mobile dust extractors. They are compact and lightweight, but have enough capacity for common jobsite tasks. The CT MIDI is slightly larger in size, but offers increased capacity for heavier on-site use. Sporting large wheels and double casters, these units can easily negotiate obstacles in the shop or on the worksite. With 99 CFM and only 62 dB (on low setting), these CTs can quickly and quietly remove large amounts of debris, with minimal noise distractions. One disposable filter comes standard on the CT MINI and CT MIDI, with the option of additional dry and wet filters to meet your every need. The integrated hose garage keeps hoses and cords well organized and makes Systainer transport simple and efficient.
|
|
|
 (53 Customer Reviews)
|
|
DELTA 50-850 1-1/2-Horsepower 1200 CFM Vertical Bag Dust Collector, 115-Volt 1-Phase
By: Delta
Our price:
$539.03 List price:
$828.00
You save
$288.97
(
35%)
- Dust collector with a powerful 1.5 HP motor and innovative vertical design
- Moves up to 1,200 cubic feet of air per minute via curved steel impellers
- Filters out pollutants as small as 5 microns
- Measures 88 x 27 x 37 inches; weighs 100 pounds;
- Utilizes clear 6-mil durable plastic bags for changing ease
|
Product Description
The DELTA 50-850 1.5 HP 1200 CFM Vertical Bag Dust Collector features a volume-saving vertical design that doesn't compromise the power of its completely encased 1.5 HP motor, which moves up to 1,200 cubic feet of air per minute by employing curved steel impellers for durability and maximum air velocity. The vertical dust collector sits on a sturdy steel base, and four glide wheels that can move anywhere in your shop without damage. The durable plastic collection bag can be mounted on one of two rings. The upper bag can filter out pollutants 30 micron in size--contaminants that your eyes can't see but your lungs will thank you for. In addition, you can upgrade your machine to five- or one-micron filter bags. The 6-cubic-foot collection bag is a 6-mil durable plastic that allows you to see when the bag needs changing. Exhaust is filtered through the filter bag rather than the collection bag to prevent air from escaping. The dust collector includes four swivel caster assemblies, a cord, a plug, and an instruction manual.
|
|
JET DC-650RBK Dust Collector with Remote and Filter Bag Kit
By: JET
Our price:
$389.99 List price:
$464.00
You save
$74.01
(
16%)
- Hook up one to three machines for optimum dust cleaning
- Quick-install collection bag makes emptying and re-attaching a snap
- Single-stage design for economical and quiet operation
- Includes four casters for maneuverability and total portability
- Remote Control is Radio Frequency thus no need for line of sight to turn machine on and off
|
Product Description
Clean up with this dust collection system from JET with just the touch of a button. This unit comes with a remote control making it easier to turn on and off. It will keep your machines and shop area clear of sawdust and chips, and your lungs free of dust. The 1 hp, single-phase, 115/230-volt motor is permanently lubricated, totally enclosed, and fan-cooled for years of trouble-free operation. The powerful performance of the 4-inch dust port makes this the ideal dust collector for most small shops, and the single-stage design allows economical, quiet operation. This system has a static pressure of 7. 8 inches with 650 cfm. Your purchase includes a 30-micron filter and collection bag; connecting hose not included.
|
|
|
 (1 Customer Reviews)
|
|
SHOP FOX W1727 1 HP Dust Collector
By: SHOP FOX
Our price:
List price:
$255.00
You save
(
%)
- Blade size: 10-Inch
- Arbor Speed: 4,250 RPM
- Table Height: 35-Inch
|
Product Description
Designed for portability, the model W1727 1 HP Dust Collector can be moved from one machine to another when needed, instead of having to build an entire fixed dust collection system and running ducts to each machine. Some of the machines that this unit works well with are the oscillating drill presses, 13" planers, cabinet-style saws, bench-top and combination sanders, miter saws, floor sweeps, and stand-mounted dust collection nozzles.
|
|
|
 (2 Customer Reviews)
|
|
Grizzly G1163 1 HP Light Duty Dust Collector
By: Grizzly
Our price:
List price:
$165.00
You save
(
%)
- Air Suction Capacity: 450 CFM
- Approx. Shipping Weight: 58 lbs.
- Impeller: Balanced Steel, Radial Fin
- Motor size: 1 H.P., single phase
- Powder coated paint
|
Product Description
INCLUDES WALL MOUNTING BRACKETS
|
|
JET DC-1200CK 2HP 1PH Dust Collection with Canister Kit
By: JET
Our price:
List price:
$769.00
You save
(
%)
- Industrial-quality construction effectively handles collection of wood chips and sawdust
- Quick-install collection bag makes emptying and re-attaching a snap
- Single-stage design for economical and quiet operation
- Industrial controls designed for years of trouble-free use
- Includes four casters for maneuverability and total portability
|
Product Description
Includes 2 HP 1-Phase Dust Collector w/ Canister - 710700CK, Canister
|
|
|
 (1 Customer Reviews)
|
|
The Dust Deputy
By: Oneida Air Systems
Our price:
List price:
$99.00
You save
(
%)
- Separates 99% of material before it hits your vacuum
- Increased suction power
- Extend the life of your filters
|
Product Description
The Dust Deputy is an extremely efficient, cyclonic pre-separator for vacuums. Trap dust in the barrel and NOT in your shop vacuum. The Dust Deputy will filter 99% of sanding dust, with only 1% going into the vacuum. Extend the life of your shop vacuum and your filters!
The Dust Deputy is injection molded from translucent, static dissipating plastic. Added to your existing shop vacuum, it uses centrifugal force to literally spin the material being conveyed right out of the airstream, and into the bucket.
99% of the material NEVER reaches your shop vacuum!
Flat rate shipping to the Lower 48 United States only $10.50. Alaska, Hawaii, Canada, and all other countries, please call 800-732-4065 for shipping arrangements.
|
|
JET DC-1200BK 2HP 1PH Dust Collection with Bag Kit
By: JET
Our price:
List price:
$515.00
You save
(
%)
- Industrial-quality construction effectively handles collection of wood chips and sawdust
- Quick-install collection bag makes emptying and re-attaching a snap
- Single-stage design for economical and quiet operation
- Industrial controls designed for years of trouble-free use
- Includes four casters for maneuverability and total portability
|
Product Description
Includes 2 HP 1-Phase Dust Collector w/ Bag Filter - 710700BK, Bag Filter
|
|
Complete List of Tools
Complete List of Outdoor Products
|