|
Powerbuilt 648796 Honda Crankcase Pulley Removal Tool
By: Alltrade Tools
Our price:
$15.73
List price:
$39.99
You save
$24.26
(
61%)
- Crankcase pulley removal tool for most Honda and Acura engines
- For removal and installation of crankcase pulley bolt
- Designed with hardened chrome molybdenum steel construction
- Includes one pulley removal tool
- 2.2 inches by 5.8 inches by 5.9 inches; 1.3-pounds; lifetime warranty
|
Product Description
The Powerbuilt 648796 50-millimeter Honda crankcase pulley removal tool keeps the crank pulley still, allowing users to easily loosen or tighten the crank pulley bolt in most Honda or Acura engines. Constructed of hardened chrome molybdenum steel, it's built to withstand extensive use in the garage, and at 2.2 inches by 5.8 inches by 5.9 inches, it's small enough to get into those tight engine spaces. It's backed by a lifetime warranty.
|
|
|
Stanley 55-515 12-inch Wonderbar Pry Bar
By: Stanley Hand Tools
Our price:
$8.95
List price:
$12.22
You save
$3.27
(
27%)
- Prying bar designed for strength and durability
- Contoured bar makes pulling nails, prying, lifting and scraping easier
- Forged high-carbon steel for increased strength and durability
- Nail slots at both ends for easy nail removal
- 12-3/8 inches in length; 1-3/4-inch blade width
|
Product Description
The Stanley Wonderbar Pry Bar features forged high-carbon steel construction, heat-treated for increased strength and durability. Its polished, beveled cutting edges and contoured bar make prying, lifting, and scraping easier; it also includes a beveled nail slot at both ends for easy nail removal. The pry bar is powder coated for long-lasting wear. It measures 12-3/8 in length with a 1-3/4-inch blade width.
|
|
|
Silverhill 2pc Nylon Non Marking Pick or Spudger
By: Silverhill Tools
Our price:
- Made from special nylon, won't mark most surfaces
- 2 pack
- Pointed on one end, flat taper on the other end
- Non-Conductive
- 6 inches long (15cm)
|
Product Description
Its important to maintain the finish of your consumer electronic items. When disassembling items you need to use better tools to make sure you don't scratch or scuff your items. These pry bars are made from nylon, and will not mark the casing of electronic items in most situations.
|
|
|
Duckbill Deck Wrecker
By: Forrester Manufacturing
Our price:
List price:
$59.95
You save
(
%)
- Patented design uses leverage to pry boards easily from floor joists.
- Slides under the board, straddles a single or double joist and lifts the board usually in one piece.
- Work from standing position, not on your knees.
- Drastically reduces demolition time.
- Head rotates to allow working close to structure.
|
Product Description
The Duckbill Deck Wrecker straddles a single or double joist with a steel head to pry nailed OR screwed boards up using leverage. It is equipped with a strong fiberglass handle and a padded non-slip grip.
|
|
|
Stanley 55-099 FatMax Xtreme Fubar Functional Utility Bar
By: Stanley Hand Tools
Our price:
$23.47
List price:
$39.99
You save
$16.52
(
41%)
- Professional grade utility bar is a 4-in-1 tool for prying, splitting, board bending, and striking
- 1-piece forged steel for increased durability
- Textured grip for excellent comfort and control, even when wet
- Beveled nail slot for pulling and prying nails
- Limited lifetime warranty
|
Product Description
The Stanley FatMax Xtreme Fubar Functional Utility Bar is a 4-in-1 tool for prying, splitting, board bending, and striking jobs. When you want to drive nails, you have a pneumatic gun. When you want to demolish things, you have the FatMax Xtreme Fubar. There's a reason that this tool was a recipient of the Popular Science "Best of What's New" Award. As their reviewer put it, "The Fubar's square head and tapered edge tore huge holes in the walls, and the toothed jaws wrenched studs so forcefully I swear I heard the wood cry out in pain." 
FatMax demolition bars are engineered with the professional in mind. View more details. | 
4-in-1 tool for prying, splitting, board bending, and striking jobs. See the full line of Stanley demolition tools. | Built from a single piece of tempered, forged steel for increased durability and the prevention of chipping, this jaw-dropping 18-inch long, 4-pound tool was built to withstand -- and give out -- daily professional use, and abuse. The two-tiered jaws are ideal for grabbing common dimensional lumber and decking, and the beveled nail slot is ideal for pulling and prying commonly used construction nails. The bar also features a textured grip that provides excellent comfort and control, even when wet. The Fubar 4-in-1 tool comes with a manufacturer's limited lifetime warranty. About FatMax Xtreme Demolition Tools
FatMax demolition bars are engineered with the professional in mind. Constructed to the highest quality standards in the industry, and designed specially for heavy demolition projects, FatMax Xtreme demolition tools are forged from high-carbon steel with a trilobe design that can withstand up to 975 foot-pounds of bending momentum.
Product Description
FATMAX EXTREME FUBAR FUNCTIONAL UTILITY BAR *64 oz. *One piece forged bar from select steel for increased strength and durability *Tempered striking and struck face *Special extracting claw heat-treated for added durability
|
|
|
Stanley FatMax Xtreme 55-120 FuBar III
By: Stanley Hand Tools
Our price:
$71.90
List price:
$79.99
You save
$8.09
(
10%)
- Excellent for prying, splitting, board bending and heavy striking jobs
- 30 No. 8221; length and No. 8211; superior leverage
- 8.5-pound total weight is precision balanced for maximum striking power
- 2-tier jaw sized for 2x lumber and decking
- Textured grip for excellent control and comfort
|
Product Description
Fatmax Fubar III, 30", Utility Bar, The Ultimate 8 In 1 Demolition Tool, Prying, Splitting, Board Bending & Heavy Striking Jobs, Superior Leverage, Sledge Hammer Face, 2 Tier Board Grabber Standard Framing & Decking, Nail Puller & Pry Bar, Textured Rubber Grip, Also Has Hydrant Wrench & Gas Shut Off Wrench.
|
|
|
TEKTON 3324 18-Inch Wrecking Bar
By: TEKTON
Our price:
$8.88
List price:
$15.99
You save
$7.11
(
44%)
- Drop Forged Hardened Steel Construction
- Made from Solid Hex Bar Stock
- Flat End for Prying and Lifting
- High-Leverage Hook End with Deep--Inch-V-Inch Nail Slot
- Durable Enamel Finish
|
Product Description
Tekton by M.I.T. 18 inch WRECKING Bar features: Drop Forged Hardened Steel Construction, Made from Solid Hex Bar Stock, Flat End for Prying and Lifting, Hook End with Deep- inchV inch Nail Slot for High Power Leverage, Durable Baked Enamel Finish, Size: 18 inch
|
|
|
Hyde Manufacturing 45600 9-1/2" Pry Bar Scraper
By: Hyde Manufacturing
Our price:
$9.06
List price:
$16.99
You save
$7.93
(
47%)
- Limit one (1) per order
- Returns will not be honored on this closeout item
|
Product Description
Use to remove molding, to open boxes, to scrape paint and to pull nails. High carbon steel hardened and tempered, with a ground scraping end, and a nail slot.
|
|
|
Shark Corp 21-2225 10-Inch Prybar and Nail Puller
By: Shark Corporation
Our price:
$13.58
List price:
$27.00
You save
$13.42
(
50%)
- Dual-purpose pry bar and nail puller with a hand-sharpened, double-tempered blade
- Pries into any tight spot with ease and less damage to walls
- Super thin, curved blade that lifts crown molding and small-head or no-head nails
- Back of the puller doubles as a striking surface
- 10-inches long; weighs 13.6-ounces shipped
|
Product Description
This pry bar and nail puller is made with high-quality hardened steel alloy and the thinnest blade available on the market. It will pry into any tight spot with ease, doing less damage to wall and molding surfaces. The curve of the blade is designed to lift molding easily with a turn and is so sharp it removes any nail, even very small and no-head nails, lodged in the wall or any other material.
Product Description
This high-quality performance tool makes jobs faster and more precise. The 10-inch pry bar and nail puller from Shark is made with high-quality hardened steel alloy and it has the thinnest blade available on the market, so it will pry into any tight spot with ease and less damage to wall and molding surface. The curve of the blade is designed to lift molding easily with just a twist, and it's so sharp that it will remove any nail -- including small or no-head nails lodged in the wall or any other material.
|
|
|
Stanley 55-136 36-Inch Forged Hexagonal Steel Ripping Bar
By: Stanley Hand Tools
Our price:
$14.98
List price:
$14.08
You save
(
%)
- Wrecking bar designed for easier demolition jobs
- Designed to withstand wear
- Forged high-carbon steel construction for extra strength and durability
- Beveled chisel end and slotted claw for better performance
- 36-Inch in length
|
Product Description
Stanley 55-136 36" Forged Hexagonal Steel Ripping BarStanley is proud of its reputation for excellence. They are dedicated to continually testing, designing and improving their products to ensure quality and maximum function. Maintaining their standing of being the world's best at what they do is important to them and what you expect from a name like Stanley. Stanley 55-136 36" Forged Hexagonal Steel Ripping Bar Features:; High-carbon steel adds prying strength ; Chisel end is beveled ; Both slotted claw and chisel ends are polished
Product Description
The Stanley 36-Inch Wrecking Bar features forged, high-carbon steel construction and a hexagonal cross section for extra strength and durability. It is designed with a polished, beveled chisel end and polished slotted claw for improved functionality and performance. The wrecking bar is 36 inches in length.
|
|
|
Stanley 93-310 5/8-Inch Board Bender
By: Stanley Hand Tools
Our price:
$37.57
List price:
$52.99
You save
$15.42
(
29%)
- Board bender ideal for straightening deck and joist boards quickly and easily
- Designed for strength and durability
- Carbon steel construction
- Cushioned handle designed for kneeling; holds pressure for hands-free use
- 5/8-inch bar
|
Product Description
680-93-310 Features: -For straightening deck and joist boards.-Cushioned handle for kneeling to maintain pressure.-Frees both hands for nailing.-Handle Material: Carbon Steel.-Type: Board Bender.-Quantity: 2 per box.-Price is for 1 Each. Dimensions: -5/8'' high bar for strength and durability.
Product Description
The Stanley Board Bender features a 5/8-inch-high carbon steel bar. It is ideal for straightening deck and joist boards faster and easier. The board bender is designed for use while kneeling with a cushioned handle to maintain pressure while keeping both hands free for nailing. The bender is designed for strength and built for durability.
|
|
|
Red Devil 4050 Scrape'N Pry Bar
By: Red Devil
Our price: $9.99
- Multi-purpose
- For professional and general use
- Chiseled edges
- Finest hardened steel
- Great for scraping, pulling nails and stapling
|
Product Description
Red Devil 4050 Scrape ?n Pry BarsFor professional and general use. Multi-purpose tool for pulling nails, scraping paint and opening boxes. Chisel edge on both ends. Finest hardened, tempered steel.Red Devil 4050 Scrape ?n Pry Bars Features:; 1 3/4" x 9 5/8" (4.4 x 24 cm); Labeled; Does a hundred jobs in a hurry; Pry open stuck windows, open boxes and detach moulding; Great for scraping, pulling nails and stapling; Finest hardened, tempered tool steel; Both ends chisel ground; Streamlined cards; 1-1/2" x 9-5/8"
|
|
|
Stanley 55-525 15-inch Super Wonder Bar Pry Bar
By: Stanley Hand Tools
Our price:
$13.70
List price:
$20.64
You save
$6.94
(
34%)
- Prying bar designed for easier work
- Longer bar provides extra reach and more leverage for prying and lifting
- Tight bend angle for precise positioning
- Arched center for greater prying leverage
- 16 inches in length; 1-3/4 inches in width
|
Product Description
The Stanley Super Wonder Bar Pry Bar is designed for easier prying, lifting, and nail removal. At 15-1/2 inches in length, it provides extra reach and more leverage, and its tight bend angle allows more precise positioning. The pry bar features an arch in its center, eliminating the need for a wood block to achieve necessary swinging motion for nail pulling. This pry bar also works as a panel lift: simply position the pry end under the panel and press down the end with a foot for convenient, hands-free operation. The bar's blade width is 1-3/4 inches.
|
|
|
Titan 17005 Stainless Steel Prybar and Scraper Set - 2 Piece
By: Titan Tools
Our price:
List price:
$37.99
You save
(
%)
- Rigid stainless steel construction
- Razor sharp scraper edges
- Ideal for nail and tack pulling, prying and scraping
- Attractive clam shell package
- Sizes includes 7-1/4 x 9/16" and 9-1/4 x 9/16"
|
Product Description
A great addition to any toolbox. Rigid stainless steel construction makes both the 7in. and 9in. tool ideal for pulling, prying and scraping. Pry Bar Type: Scraper / pry, Pieces (qty.): 2, Tool Length (in.): 7, 9, Material Type: Stainless steel
|
|
|
QLT By MARSHALLTOWN 14956 Little Monster Pry Bar
By: Marshalltown
Our price:
$69.50
List price:
$77.19
You save
$7.69
(
10%)
- All steel construction ensures long life
- Powder coated finish
- 46" Length
- Ideal for prying forms and other embedded objects
|
Product Description
All steel construction ensures long life. Powder coated finish. 46" Length. Ideal for prying forms and other embedded objects.
|
|
|
Stanley Hand Tools 55-119 FatMax Functional Utility Bar
By: Stanley Hand Tools
Our price:
$19.90
List price:
$29.99
You save
$10.09
(
34%)
- 2.5-pounds--fits easily in the hammer loop
- 1-piece forged steel bar for increased durability
- Board grabbing jaw sized for 2-times the lumber
- Beveled nail slot for pulling and prying nails
- Textured grip for excellent comfort and control, even when wet
|
Product Description
FatMax Functional Utility Bar is a multipurpose demolition tool for gripping lumber, prying, pulling nails and a breaker edge for demolition work. Tough tool is protected by limited lifetime warranty. Pry Bar Type: Utility, Pieces (qty.): 1
|
|
|
Mayhew Tools 41104 CatsPaw Deck Wrecker
By: Mayhew Tools
Our price:
$85.99
List price:
$139.99
You save
$54.00
(
39%)
- Unique, curved rocker design rolls on joist for easy board removal
- Removes boards without causing damage to the joist
- Removes deck boards with less damage so they can be re-used
- Removes nails and left behind screws with ease
- 44-Inch long for maximum leverage
|
Product Description
The Cats Paw Deck Wrecker provides the leverage to pry up old, stubborn deck boards fast and easy, so you'll save time and your back! U.S.A. Pry Bar Type: Deck Wrecker, Pieces (qty.): 1, Tool Length (in.): 44, Material Type: Constructed of heavy-duty steel and powder coated for corrosion resistance
|
|
|
Stanley 55-526 21-Inch Wonder Bar X21 Pry Bar
By: Stanley Hand Tools
Our price: $15.99
- Prying bar designed for easier work
- Excellent for pulling nails, lifting, or prying
- Forged high-carbon steel for increased strength and durability
- High-visibility, powder-coated finish
- 21 inches in length; limited lifetime warranty
|
Product Description
The Stanley WonderBar X21 Pry Bar is designed for easier prying, lifting, and nail pulling. It features forged high-carbon steel construction for increased strength and durability. Its longer-than-average length of 21 inches allows better reach and greater leverage. The pry bar has a high-visibility, powder-coated finish for long-lasting wear. It comes with a limited lifetime warranty.
Product Description
The Stanley WonderBar X21 Pry Bar is designed for easier prying, lifting, and nail pulling. It features forged high-carbon steel construction for increased strength and durability. Its longer-than-average length of 21 inches allows better reach and greater leverage. The pry bar has a high-visibility, powder-coated finish for long-lasting wear. It comes with a limited lifetime warranty.
|
|
|
Vaughan B215L Original SuperBar, 21-Inch Long.
By: Vaughan & Bushnell Mfg
Our price:
$14.93
List price:
$18.99
You save
$4.06
(
21%)
- Essential tool for homeowners or tradesmen
- 21" length provides excellent leverage
- "Shepherd's crook" rocker head is designed for maximum prying power
- Forged, spring tempered steel for heavy duty use
- Three beveled nail slots; polished sharp blades for easy insertion
|
Product Description
Rocker head designed for maximum prying power. Use to pry molding, scrape and pull nails. Forged, spring tempered steel for heavy duty use. 3 beveled nail slots; polished, sharp, tapered blades for easy insertion.
|
|
Complete List of Tools
Complete List of
Outdoor Products
|
Canada
UK
Germany
